Page 1
Warning of laser CENTER 352 Do not point laser beam to human eyes directly or indirectly from reflective surfaces. INFRARED THERMOMETER Cautions INSTRUCTION MANUAL Before using the infrared thermometer the operator have to notice the following: Keep away from electrical welders, induction heaters and other EMF sources.
Page 2
Switch and Functions Changing Battery When the battery voltage drops below the required range for reliable CAUTION LASER RADIATION - DO NOT STARE INTO BEAM OUTPUT < 1mW AT 630 670mm SCAN CLASS II LASER PRODUCT operation, the low battery symbol will CAUTION LASER RADIATION -...
Page 3
Emissivity GENERAL SPECIFICATIONS Emissivity is a term used to describe the energy-emitting Field of View 12:1 characteristics of materials. The higher of this value means the Detector Thermopile more radiation emittance the materials has. Most organic materials Temperature Range -20~500°C -4~932°F and painted or oxidized surfaces have an emissivity of 0.98.
Page 4
CE Certification This instrument conforms to the following standards: EN50081-1:1992 Electromagnetic Emissions EN50082-1:1997 Electromagnetic Susceptibility Tests were conducted using a frequency range of 80-1000 MHz with the instrument in three orientations. The average error for the three orientations is ±1.5°C (±3.0°F) at 3V/m throughout the spectrum.