1. Manuals
  2. Brands
  3. Smartsafe Tech Manuals
  4. Test Equipment
  5. X-431 ADAS Mobile
  6. User manual

Smartsafe Tech X-431 ADAS Mobile User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Version: V1.00.000
Revised date: 10-15-2020
SMARTSAFE owns the complete intellectual property rights for the software used by this product. For any
reverse engineering or cracking actions against the software, SMARTSAFE will block the use of this product
and reserve the right to pursue their legal liabilities.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X-431 ADAS Mobile and is the answer not in the manual?

Questions and answers

Summary of Contents for Smartsafe Tech X-431 ADAS Mobile

  • Page 1 Version: V1.00.000 Revised date: 10-15-2020 SMARTSAFE owns the complete intellectual property rights for the software used by this product. For any reverse engineering or cracking actions against the software, SMARTSAFE will block the use of this product and reserve the right to pursue their legal liabilities.
  • Page 2 Calibration Tool User Manual Copyright Information Copyright © 2020 by SMARTSAFE TECH CO.,LTD. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of SMARTSAFE.
  • Page 3 Calibration Tool User Manual Safety Precautions The X-431 ADAS Mobile calibration tool is exclusively intended for use on a vehicle. To avoid personal injury, property damage, or accidental damage to the product, read all of the information in this section before using the product: •...
  • Page 4 DLC (Data Link Connector) is clear and secure. On Using X-431 ADAS Mobile Calibration Tool In order to avoid incorrect handling and injury to the user or destruction of the X-431 ADAS Mobile calibration tool arising from this, pay attention to the following: •...
  • Page 5 ADAS Mobile Calibration Tool User Manual the tool can cause ignition. • Do not use solvents to clean the laser unit. • Do not drop the unit. • Remove the batteries if the laser / laser range finder will not be in use for a long period. •...

  • Page 6: Table Of Contents

    2.3.2.2 Determine the placement location of the X-431 ADAS Mobile .............28 2.3.2.3 Place the X-431 ADAS Mobile ..........................29 2.3.2.4 Adjust the X-431 ADAS Mobile in parallel with the vehicle ..............29 2.3.2.5 Select the desired target / pattern board ......................30 2.3.2.6 Set the height ................................34 3 Start Calibration ....................................
  • Page 7 ADAS Mobile Calibration Tool User Manual 3.1.3 Start calibration..................................37 3.2 Calibrating the rear camera ..............................46 3.2.1 Why to calibrate? .................................46 3.2.2 Operation Notes .................................. 47 3.2.3 Start calibration ...................................48 4 Target Pattern Kit (Optional) ..............................54 5 Care & Maintenance ..................................57 6 Warranty .......................................

  • Page 8: Product Profile

    To perform the ADAS calibration, the following two components are required: • X-431 ADAS Mobile Calibration Tool – It is designed to calibrate the position of the vehicle sensor and target. It mainly consists of calibration frame (with cross member), five-line laser device, cross laser module, laser reflector, auxiliary mirror, L-shaped positioning bracket, leader hammer and calibration panel (available in packages or individual) etc.
  • Page 9 ADAS Mobile Calibration Tool User Manual • Diagnostic Tool (sold separately) – The calibration tool can be exclusively operated in conjunction with a Launch’s diagnostic tool. Diagnostic tools from other manufacturers will not be supported. Currently, the following diagnostic tools made by LAUNCH can work together with the calibration tool (More new products featuring this module will come soon in the future without prior notice): •...

  • Page 10: Packing List

    ADAS Mobile Calibration Tool User Manual 1.2.2 Packing List Please check the packing list upon receiving your tool so that complaints can be issued immediately regarding potential damage or missing parts. For different destinations, the accessories may vary. For details, please consult from the local dealers or check the included packing list. While unloading, please note: The heavy tool may drop down and cause injuries, remember to always unload the tool with the aid of a second person or use suitable aid as necessary.
  • Page 11 ADAS Mobile Calibration Tool User Manual Plumb line (LAM09-06) Target storage bracket (LAM09-07) Target extension rod for Toyota (LAM09-08) Target extension rod for Honda (LAM09-09) Laser range finder Cross sticker www.newsmartsafe.com +86 755 84528537...
  • Page 12 ADAS Mobile Calibration Tool User Manual ADAS Activation Card User Manual (Available in different product configuration packages. Target boards and patterns for Lane Departure Warning Calibration target / pattern System are included with this tool. Other boards and patterns for other ADAS systems need to be purchased boards separately.
  • Page 13 ADAS Mobile Calibration Tool User Manual LAM01-04-R Honda-LDW LAM01-06-1 Toyota-LDW LAM01-06-2 Toyota-LDW LAM01-06-3 Toyota-LDW LAM01-07-L Nissan-LDW LAM01-07-R Nissan-LDW LAM01-09 Hyundai/Kia-LDW LAM01-10 Mazda-LDW www.newsmartsafe.com +86 755 84528537...
  • Page 14 ADAS Mobile Calibration Tool User Manual LAM01-11 Optional Romeo-LDW LAM01-12-L Nissan/Renault-LDW LAM01-12-R Nissan/Renault-LDW LAC01-13 Hyundai-LDW LAM01-15 Subaru-LDW LAM01-16-L Mazda-LDW LAM01-16-R Mazda-LDW www.newsmartsafe.com +86 755 84528537...
  • Page 15 ADAS Mobile Calibration Tool User Manual LAM01-17 Honda-LDW LAM01-18-L Suzuki-LDW LAM01-18-R Suzuki-LDW LAM01-19-L Mitsubishi -LDW LAM01-19-R Mitsubishi-LDW LAM01-20 Honda-LDW www.newsmartsafe.com +86 755 84528537...

  • Page 16: Components & Controls

    ADAS Mobile Calibration Tool User Manual 1.3 Components & Controls The X-431 ADAS Mobile calibration tool mainly includes the following items and components: 1.3.1 Calibration frame The calibration frame mainly consists of the following components: A - Right crossbar Loaded with a scale ruler, a positioning plate for securing the target boards.
  • Page 17 ADAS Mobile Calibration Tool User Manual Front View 1. Right crossbar 2. Scale ruler* 3. Set screw* For securing the positioning plate. When released, the positioning plate (7) can be moved along the sliding rail freely. When unfolding the right / left crossbar, please tighten the set screw to prevent the positioning plate (7) from sliding to cause personal injury.
  • Page 18 ADAS Mobile Calibration Tool User Manual For securing the pattern boards / attaching the cross laser module. When installing the big pattern board, it should be lifted up to ensure a proper installation of the pattern board. 9. Laser range finder For measuring the height of the center of the pattern board from the ground.

  • Page 19: Five-Line Laser Device (Lam09-01)

    ADAS Mobile Calibration Tool User Manual 17. Fine-tuning bolt Rotate the bolt to turn the crossbar axially. 18. Hand crank For adjusting the height of the lifter. 19. Handle 1.3.2 Five-line laser device (LAM09-01) The five-line laser device is used for aiming laser beams in five directions to position the calibration frame and vehicle.
  • Page 20 ADAS Mobile Calibration Tool User Manual Installation of the lithium-ion battery pack 1. Press down the latch of the cover and pull the battery cover. Lithium battery 2. Insert the lithium-ion battery pack with the contact terminal towards the 2 small pins in the battery Charging cable compartment.
  • Page 21 ADAS Mobile Calibration Tool User Manual Batteries can deteriorate, leak or explode, and can cause injury or fire. 1. Do not shorten the battery terminals. 2. Do not charge Alkaline batteries. 3. Do not mix old and new batteries. 4. Do not dispose of batteries into household waste. 5.

  • Page 22: Cross Laser Module (Lam09-02)

    ADAS Mobile Calibration Tool User Manual 1.3.3 Cross laser module (LAM09-02) While adjusting the calibration frame in parallel with the vehicle, the laser module can be used. Generally it should be attracted onto the magnetic laser fix-plate (8) of the calibration frame. 1.

  • Page 23: Auxiliary Laser Mirror (Lam09-04)

    ADAS Mobile Calibration Tool User Manual 1.3.5 Auxiliary laser mirror (LAM09-04) The auxiliary laser mirror is used to position the center line by ensuring the front and rear center points of the vehicle are on the same line. 1.3.6 L-shaped positioning bracket (LAM09-05) The L-shaped positioning bracket aids in locating the center of the front wheels to correctly position the calibration frame.

  • Page 24: Target Extension Rod For Toyota (Lam09-08)

    ADAS Mobile Calibration Tool User Manual 1.3.9 Target extension rod for Toyota (LAM09-08) Generally the height of the calibration frame is specially designed to meet the calibration requirement of most vehicles, but for some vehicles with lower calibration height, the target extension rod is required. The target extension rod is used for LDW system calibration on some Toyota vehicles.

  • Page 25: Laser Range Finder

    ADAS Mobile Calibration Tool User Manual 1.3.11 Laser range finder The laser range finder is used to measure the height from the target / pattern board to the ground. Since the laser range finder is not on the same level as the target board/pattern board, a precise tolerance value is preset in the ADAS calibration software for all vehicles and no more settings and calculations are required by users.
  • Page 26 ADAS Mobile Calibration Tool User Manual Range 0.1 ~ 25m (0.33~82ft) Accuracy ± 1/152ft Laser class Laser type 635-650mm, power < 1mW Battery 2 AAA batteries or Lithium battery Dimensions 4 x 1.4 x 0.7 inch (100 x 35 x 18mm) Operating Temperature 14°F ~ 104°F / -10℃...

  • Page 27: Initial Use

    ADAS Mobile Calibration Tool User Manual 2 Initial Use 2.1 Place the calibration frame By default, it is folded for easier shipment. Follow the steps below to unfold it. The heavy tool may tilt down and cause injuries, remember to always unfold the tool with the aid of a second person.
  • Page 28 ADAS Mobile Calibration Tool User Manual 5. Pull the right crossbar (1) up until it fully attaches to the positioning bracket (B), then use the safety snap hook (5) to fix it. Beware of pinching hands while proceeding this step. 6.

  • Page 29: Activate Adas Function

    ADAS Mobile Calibration Tool User Manual 2.2 Activate ADAS function By default, the calibration feature of the pre-installed diagnostic software of LAUNCH scanners is disabled. To ensure normal use of the calibration function of the diagnostic software, you need to activate the pin card to unlock the calibration function on the LAUNCH scanner (sold separately) first.
  • Page 30 ADAS Mobile Calibration Tool User Manual 6. Scratch or scrap the designated area on the included Activation Card to reveal the password, and input the 24-digit password to activate it. 7. Now the ADAS function becomes accessible and is ready for use. www.newsmartsafe.com +86 755 84528537...

  • Page 31: General Calibration Operations For Ldw System

    2.3 General Calibration Operations for LDW System 2.3.1 Precondition for the Use of the X-431 ADAS Mobile Regard the following in order to use the X-431 ADAS Mobile: • Vehicle system is working properly. • No trouble codes stored in ECU memories.

  • Page 32: Workstation Ground

    ADAS Mobile Calibration Tool User Manual 2.3.1.2 Workstation ground Make sure the vehicle is parked with all wheels on an even floor surface. Correct:  Wrong:    www.newsmartsafe.com +86 755 84528537...

  • Page 33: Workstation Lighting

    In this case, for the positioning of the calibration tool and vehicle, it is necessary for the user to manually finish it. The following steps are needed when working with the X-431 ADAS Mobile: 1. Determine the center line of the vehicle.
  • Page 34 ADAS Mobile Calibration Tool User Manual 2. Place five-line laser instrument LAM09-01 at point A (the side of the laser instrument embedded with the logo opposite to the driving direction) to ensure that the red dot on the case aligns with the point A. 3.

  • Page 35: Determine The Placement Location Of The X-431 Adas Mobile

    2.3.2.2 Determine the placement location of the X-431 ADAS Mobile The placement location of the X-431 ADAS Mobile varies with the vehicles being serviced. Please strictly follow the on-screen prompts to determine it. In general, it includes the following possible options: A.

  • Page 36: Place The X-431 Adas Mobile

    4. Fix the ADAS Mobile in place. 2.3.2.4 Adjust the X-431 ADAS Mobile in parallel with the vehicle 1. Use the fine-tuning knob to adjust the crossbar position so that the longitudinal laser beam of cross laser instrument LAM09-02 overlaps the center line (and the center of the vehicle emblem), and then the www.newsmartsafe.com...

  • Page 37: Select The Desired Target / Pattern Board

    ADAS Mobile Calibration Tool User Manual crossbar is parallel to the vehicle. 2. Turn off the cross laser instrument LAM09-02 and detach it from the center positioning plate. 3. Step the parking safety mechanism (12) down to fix the calibration frame to prevent it from moving. 2.3.2.5 Select the desired target / pattern board 1.
  • Page 38 ADAS Mobile Calibration Tool User Manual 3). Place the mounting holes on the pattern board holder. 4). Slide the positioning plates at both ends until they firmly secure the pattern board. www.newsmartsafe.com +86 755 84528537...
  • Page 39 ADAS Mobile Calibration Tool User Manual 2. For target board (smaller), follow the steps below to install it. 1). Please note that there are two preset mounting holes on the back of each small target board. Align the holes with the mounting hook on the positioning plate and insert them into the plate, then gently press the board down until it is firmly secured on the plate.
  • Page 40 • If the target board extension rod (e.g. LAM09-08 / LAM09-09) is required (in the condition that the height or width of the X-431 ADAS Mobile cannot meet the specified value), first attach the extension rod on the positioning plate, and then install the target board on the extension rod.

  • Page 41: Set The Height

    ADAS Mobile Calibration Tool User Manual 2.3.2.6 Set the height Use the hand crank (18) to adjust the height until the value displayed on the laser range finder matches the value specified in the on-screen instructions. Since the laser range finder is not on the same level as the target board/pattern board, a precise tolerance value is adjusted for the calibration height of each vehicle on the diagnostic tool and no more settings and calculations are required by users.

  • Page 42: Start Calibration

    ADAS Mobile Calibration Tool User Manual 3 Start Calibration 3.1 Calibrating the front camera This chapter describes a general operation procedure of front camera calibration. Here we take AUDI Q 5 USA/Canada 2017 for example to demonstrate how to make calibration. 3.1.1 Why to calibrate? 1).
  • Page 43 ADAS Mobile Calibration Tool User Manual • ADAS calibration pattern is placed in parallel in front of the vehicle. • ADAS calibration pattern is placed in the center of the front of the vehicle. • The distance from calibration pattern to the center point of the front wheel hub is 1500 mm. The following table formulates the reference distance range for other Audi models when performing front camera calibration.

  • Page 44: Start Calibration

    ADAS Mobile Calibration Tool User Manual 3.1.3 Start calibration Follow the steps below to proceed: 1. Tap ADAS on the Job menu of the diagnostic tool. 2. The diagnostic tool starts communicating with the VCI and reading VIN. After the VIN is successfully decoded, a screen similar to the following appears: 3.
  • Page 45 ADAS Mobile Calibration Tool User Manual (Select 2018 (J)) (Select SUV) (Select Engine - Dfva 2.0l Tdi/140kw) 4. Double check your selections and tap Confirm to go to the next step. www.newsmartsafe.com +86 755 84528537...
  • Page 46 ADAS Mobile Calibration Tool User Manual 5. Select the system to be calibrated. (Select A5 Front Sensors Driver Assistance System) (Select A5 - Front Camera) (Select A5 - Calibrate Control Module) 6. Tap ADAS Mobile to continue. www.newsmartsafe.com +86 755 84528537...
  • Page 47 ADAS Mobile Calibration Tool User Manual 7. Swipe the screen to carefully read all calibration conditions and tips and double check all pre-calibration preparations are well made or not. If yes, tap Complete/Continue. 8. Check if the following steps have been done or not. 1).
  • Page 48 (Tap Next Step) 2). Determine the placement location of the X-431 ADAS Mobile. (Tap Next Step) 3). Place the X-431 ADAS Mobile. (Tap Next Step) 4). Adjust the X-431 ADAS Mobile in parallel with the vehicle. www.newsmartsafe.com +86 755 84528537...
  • Page 49 ADAS Mobile Calibration Tool User Manual (Tap Next Step) 5). Set the height. (Tap Next Step) 6). Select the LAM01-02 pattern board. (Tap Next Step) 9. The following dialog box displays on the screen. Before calibrating, make sure that all DTCs that are not related to the calibration have been erased.
  • Page 50 ADAS Mobile Calibration Tool User Manual (Tap Yes) (Tap Yes) 10. Select 74 - Suspension Control to choose how to set the vehicle level system to normal level. (Select -2-) 11. Tap -2- (Vehicle has level control system and should be set to normal level automatically). Set the drive www.newsmartsafe.com +86 755 84528537...
  • Page 51 ADAS Mobile Calibration Tool User Manual select function of the vehicle to COMFORT to set the suspension system to normal level and lock it. 12. Tap Complete/Continue, follow the on-screen instruction to finish the startup, evaluate chassis status and level control system, and enter the wheel housing edge values (*please enter the values in millimeter).
  • Page 52 ADAS Mobile Calibration Tool User Manual 16. Select 74 - Suspension Control to reset the level control system to normal control mode and activate the level control system of the suspension system. 17. Tap Complete/Continue to finish the calibration of front camera. Next the diagnostic tool will clear the previously existed diagnostic trouble codes.

  • Page 53: Calibrating The Rear Camera

    ADAS Mobile Calibration Tool User Manual 20. Tap Complete/Continue to confirm and end the whole calibration session. 3.2 Calibrating the rear camera This chapter describes a general operation procedure of rear camera calibration on AUDI A4 USA/Canada 2016 (Model Year 2018). 3.2.1 Why to calibrate? 1).

  • Page 54: Operation Notes

    ADAS Mobile Calibration Tool User Manual 3.2.2 Operation Notes Make sure the following conditions are met: WorkStation Size For calibrating the rear & AVM camera, the whole workstation size depends on the vehicle size and the calibration reference pattern. The following illustration describes the maximum workstation size for reference only.

  • Page 55: Start Calibration

    ADAS Mobile Calibration Tool User Manual On calibration tool • Use the LAC02-03 calibration pattern. LAC02-03 • Ruler or tape measure is necessary. • Calibration tool setting: The calibration pattern is parallel to the axis of the rear wheel of the vehicle and is centred.
  • Page 56 ADAS Mobile Calibration Tool User Manual 3. Choose Guided Functions to enter vehicle model selection screen. 3. Select Audi A4 Usa/Cdn 2016>. (Select 2018 (J)) (Select Sedan) www.newsmartsafe.com +86 755 84528537...
  • Page 57 ADAS Mobile Calibration Tool User Manual (Select Engine - Dfva 2.0l/140kw) 4. Double check your selections and tap Confirm to go to the next step. 5. Select System Selection from the Guided functions list. (Select System Selection) www.newsmartsafe.com +86 755 84528537...
  • Page 58 ADAS Mobile Calibration Tool User Manual (Select 6C Camera System Rear View) (Select 6c - Rear View Camera System) (Select 6c - Calibration) 6. Swipe the screen from the bottom to scroll and carefully read all instructions and notes on calibration operation.
  • Page 59 ADAS Mobile Calibration Tool User Manual 7. Input the measured height distance of the calibration pattern to the floor in millimeter (for example: 80), and tap OK to confirm. 8. Input the measured distance of the calibration pattern to the rear axle in millimeter (for example: 1300), and tap OK to confirm.
  • Page 60 ADAS Mobile Calibration Tool User Manual example: 865mm), and tap OK to confirm. 11. The rear view camera system starts calibrating. Follow the on-screen instructions until the calibration is successfully finished. www.newsmartsafe.com +86 755 84528537...

  • Page 61: Target Pattern Kit (Optional)

    4 Target Pattern Kit (Optional) Due to continuous development, more vehicle manufacturer-specific calibration panels will be individually available for the X-431 ADAS Mobile, further extending its coverage. Please check the packing list upon receiving your tool so that complaints can be issued immediately regarding potential damage or missing parts.
  • Page 62 ADAS Mobile Calibration Tool User Manual RENAULT-AVM (LAC04-10-01) (LAC04-10-02) VW-AVM (LAC04-04) 4. CORNER REFLECTOR KIT (LAC05-03) 5. MITSUBISHI AVM TARGET (LAC04-13) 6. NISSAN AVM TARGET CONFIGURATION(LAC04-15) 7. VW AVM TARGET CONFIGURATION(LAC04-14) www.newsmartsafe.com +86 755 84528537...
  • Page 63 ADAS Mobile Calibration Tool User Manual 8. DOPPLER SIMULATOR CONFIGURATION(LAC05-04) www.newsmartsafe.com +86 755 84528537...

  • Page 64: Care & Maintenance

    ADAS Mobile Calibration Tool User Manual 5 Care & Maintenance • For every spare part, the calibration tool should also be handled with care. • Keep the calibration tool clean at all times. • Do not immerse the calibration tool in water or other fluids. •...
  • Page 65 ADAS Mobile Calibration Tool User Manual THANK YOU FOR CHOOSING SMARTSAFE! If you have any questions or comments please contact: SMARTSAFE TECH CO.,LTD. Addr: 3F, Building B, Qiao’an Technology Industrial Park, Guanlan, Longhua New District, Shenzhen Zip: 518110 Tel: 86-755-84528537 http://www.newsmartsafe.com...

Table of Contents