Advancode QC 1D Series User Manual
  1. Manuals
  2. Brands
  3. Advancode Manuals
  4. Barcode Reader
  5. QC 1D Series
  6. User manual

Advancode QC 1D Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Leitor Sem Fio Compex Família QC75
O Leitor de Bolso QC75 Compex soma confiabilidade, versatilidade
e praticidade. Perfeitamente compacto, o leitor é ideal para os
usuários transportarem para onde os negócios os levam. Esses
aspectos complementam os aplicativos, incluindo os Pontos de
Venda do varejo ou serviços de campo.
O QC75 Compex é otimizado para ler em um celular, tablet ou tela
de computador.
www.bztech.com.br

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QC 1D Series and is the answer not in the manual?

Questions and answers

Related Manuals for Advancode QC 1D Series

Summary of Contents for Advancode QC 1D Series

  • Page 1 Leitor Sem Fio Compex Família QC75 O Leitor de Bolso QC75 Compex soma confiabilidade, versatilidade e praticidade. Perfeitamente compacto, o leitor é ideal para os usuários transportarem para onde os negócios os levam. Esses aspectos complementam os aplicativos, incluindo os Pontos de Venda do varejo ou serviços de campo.
  • Page 2 QC 1D Series : QC510X , 511X QC620X , 621X QC630X , 631X QC710X , 711X QC720X , 721X QC7506 , 7516 User Guide...

  • Page 3: Revision History

    Revision History Version Description Date V1.0.0 Initial release. June 23, 2015...

  • Page 4: Table Of Contents

    Table of Contents Revision History ................................2 Chapter 1 Getting Started .............................. 1 Introduction ................................1 About This Guide ..............................2 Barcode Scanning ..............................2 Barcode Programming ..........................3 Enter/Exit Setup ............................3 Programming Barcode Data ........................3 Factory Defaults ............................4 Chapter 2 Scan Mode ..............................
  • Page 5 Inter-Keystroke Delay..........................29 Convert Case .............................. 30 Emulate Numeric Keypad .......................... 31 USB DataPipe ............................. 32 USB COM Port Emulation ......................... 32 HID-POS ..............................33 Access the Scanner with Your Program ....................34 Acquire Scanned Data ..........................34 VID/PID ................................ 34 Chapter 5 Data Formatting ............................
  • Page 6 AIM 128................................53 Restore Factory Defaults ........................... 53 Enable/Disable AIM 128 ..........................53 Set Length Range for AIM 128 ......................... 54 EAN-8 ................................... 55 Restore Factory Defaults ........................... 55 Enable/Disable EAN-8 ..........................55 Transmit Check Digit ..........................55 Add-On Code .............................. 57 Add-On Code Required ..........................
  • Page 7 Interleaved 2 of 5 ..............................75 Restore Factory Defaults ........................... 75 Enable/Disable Interleaved 2 of 5 ......................75 Check Digit Verification ..........................76 Set Length Range for Interleaved 2 of 5 ....................77 ITF-6 ..................................78 Restore Factory Defaults ........................... 78 Enable/Disable ITF-6 ..........................
  • Page 8 Codabar ................................95 Restore Factory Defaults ........................... 95 Enable/Disable Codabar ..........................95 Check Digit Verification ..........................96 Start/Stop Character ..........................97 Set Length Range for Codabar ......................... 98 Code 93 ................................99 Restore Factory Defaults ........................... 99 Enable/Disable Code 93 ..........................99 Check Digit Verification ..........................
  • Page 9 Factory Defaults Table ............................ 115 AIM ID Table ..............................122 Code ID Table ..............................124 ASCII Table ............................... 125 Digit Barcodes ..............................129 Save/Cancel Barcodes ............................ 132 F1~F12................................133...

  • Page 10: Chapter 1 Getting Started

    Chapter 1 Getting Started Introduction The QC 1D SERIES supports EAN-13, EAN-8, UPC-A, UPC-E, ISSN, ISBN, Codabar, Code 128, Code 93, ITF-6, ITF-14, Interleaved 2 of 5, Industrial 2 of 5, Standard 2 of 5, Matrix 2 of 5, GS1 Databar, Code 39, Code 11, MSI-Plessey, Plessey.

  • Page 11: About This Guide

    The QC 1D SERIES has been properly configured for most applications and can be put into use without further configuration. Users may check the Factory Defaults Table in Appendix for reference.

  • Page 12: Barcode Programming

    ** Enter Setup Barcode Programming The QC 1D SERIES can be configured by scanning programming barcodes. All user programmable features/options are described along with their programming barcodes/commands in the following sections. Enter/Exit Setup ** Enter Setup Exit Setup Programming Barcode Data...

  • Page 13: Factory Defaults

    ** Enter Setup Factory Defaults Scanning the following barcode can restore the scanner to the factory defaults. You may need to reset your scanner when: 1. scanner is not properly configured so that it fails to decode barcodes; 2. you forget previous configuration and want to avoid its impact; 3.

  • Page 14: Chapter 2 Scan Mode

    ** Enter Setup Chapter 2 Scan Mode Manual Mode Manual Mode (default): A trigger pull activates a decode session. The decode session continues until the barcode is decoded or the trigger is released or the decode session timeout expires. ** Manual Mode Decode Session Timeout: This parameter sets the maximum time decode session continues during a scan attempt.

  • Page 15: Continuous Mode

    ** Enter Setup Continuous Mode Continuous Mode: A trigger press activates the scanner to scan and decode at user-specified intervals, i.e. the timeout between decodes. Each decode session lasts until barcode is decoded or the decode session timeout expires. To suspend/resume the operation, simply press the trigger. Continuous Mode Decode Session Timeout: This parameter sets the maximum time decode session continues during a scan attempt.
  • Page 16 ** Enter Setup Timeout between Decodes:This parameter sets the timeout between decode sessions. When a decode session ends, next session will not happen until the timeout between decodes expires. It is programmable in 0.1s increments from 0.0s to 25.5s. The default timeout is 1.0s. Timeout between Decodes Example: Set the timeout between decodes to 5s Scan the Enter Setup barcode.
  • Page 17 ** Enter Setup Timeout between Decodes (Same Barcode) can avoid undesired rereading of same barcode in a given period of time. This parameter sets the timeout between decodes for same barcode. It is programmable in 0.1s increments from 0.1s to 25.5s. The default timeout is 3.0s. If the parameter is set to 0, the timeout between decodes (same barcode) is infinite.

  • Page 18: Sense Mode

    ** Enter Setup Sense Mode Sense Mode: The scanner activates a decode session every time when it detects a change in ambient illumination and meets the requirement of the image stabilization timeout. Decode session continues until barcode is decoded or the decode session timeout expires. Sense Mode Decode Session Timeout: This parameter sets the maximum time decode session continues during a scan attempt.
  • Page 19 ** Enter Setup Image Stabilization Timeout: The scanner waits for the image stabilization timeout to expire before activating a decode session every time it detects a change in ambient illumination. This parameter is programmable in 0.1s increments from 0.0s to 25.5s. Image Stabilization Timeout Example: Set the Image Stabilization Timeout to 5s Scan the Enter Setup barcode.
  • Page 20 ** Enter Setup Timeout between Decodes (Same Barcode) can avoid undesired rereading of same barcode in a given period of time. This parameter sets the timeout between decodes for same barcode. It is programmable in 0.1s increments from 0.1s to 25.5s. The default timeout is 3.0s. If the parameter is set to 0, the timeout between decodes (same barcode) is infinite.
  • Page 21 ** Enter Setup Sensitivity: This parameter specifies the degree of acuteness of the scanner’s response to changes in ambient illumination. The higher the sensitivity, the lower requirement in illumination change to trigger the scanner. You can select an appropriate degree of sensitivity that fits the ambient environment. High Sensitivity ** Medium Sensitivity ** Medium Sensitivity...

  • Page 22: Command Trigger Mode

    ** Enter Setup Command Trigger Mode Command Trigger Mode: Decode session is activated by a host command. The decode session continues until the barcode is decoded or the decode session timeout expires. Command Trigger Mode Decode Session Timeout: This parameter sets the maximum time decode session continues during a scan attempt.

  • Page 23: Chapter 3 Notification

    ** Enter Setup Chapter 3 Notification Good Read Beep ** Good Read Beep On Good Read Beep Off Low Frequency ** Medium Frequency High Frequency Beep Duration: 40ms ** Beep Duration: 80ms Beep Duration: 120ms Exit Setup...

  • Page 24: Decode Result Notification

    ** Enter Setup Decode Result Notification When enabled, if a barcode does not decode, “F” is transmitted; if a barcode is decoded, “S” is appended to the barcode data as the most left character. Enable Decode Result Notification ** Disable Decode Result Notification Exit Setup...

  • Page 25: Other Settings

    ** Enter Setup Other Settings You can change the following parameter settings temporarily and the changes will be lost when you power down or reboot the scanner. Silent Mode Silent Mode On ** Silent Mode Off Note: This feature is only applicable to decode beep and will be automatically disabled when the scanner is powered down or rebooted.

  • Page 26: Chapter 4 Communication Settings

    ** Enter Setup Chapter 4 Communication Settings The scanner provides an RS-232 interface and a USB interface to communicate with the host device. The host device can receive scanned data and send commands to control the scanner or to access/alter the configuration information of the scanner via the RS-232 or USB interface.

  • Page 27: Rs-232 Interface

    ** Enter Setup RS-232 Interface Baud Rate When the scanner is connected to a host device through its RS-232 interface, you need to set communication parameters (including baud rate) to match the host device. Baud rate is the number of bits of data transmitted per second. Set the scanner’s baud rate to match the Host requirements.

  • Page 28: Parity Check

    ** Enter Setup Parity Check ** None Even Parity Odd Parity Stop Bit ** 1 Stop Bit 2 Stop Bits Exit Setup...

  • Page 29: Data Bit

    ** Enter Setup Data Bit 8 Data Bits ** 8 Data Bits, No Parity, 1 Stop Bit 8 Data Bits, Even Parity, 1 Stop Bit 8 Data Bits, Odd Parity, 1 Stop Bit 8 Data Bits, No Parity, 2 Stop Bits 8 Data Bits, Even Parity , 2 Stop Bits 8 Data Bits, Odd Parity, 2 Stop Bits 7 Data Bits...
  • Page 30 ** Enter Setup 7 Data Bits, Even Parity, 1 Stop Bit 7 Data Bits, Odd Parity, 1 Stop Bit 7 Data Bits, Even Parity, 2 Stop Bits 7 Data Bits, Odd Parity, 2 Stop Bits Exit Setup...

  • Page 31: Usb Interface

    ** Enter Setup USB Interface USB HID-KBW When enabled, the scanner’s transmission is simulated as USB keyboard input. It works on a Plug and Play basis and no driver is required. ** USB HID-KBW Exit Setup...

  • Page 32: Standard Keyboard

    ** Enter Setup Standard Keyboard ** Standard Keyboard Emulate ALT+Keypad When Emulate ALT+Keypad is enabled, any ASCII character (0x00 - 0xFF) is sent over the numeric keypad no matter which keyboard type is selected. Since sending a character involves multiple keystroke emulations, this method appears less efficient.

  • Page 33: Function Key Mapping

    ** Enter Setup Function Key Mapping When Function Key Mapping is enabled, function character (0x00 - 0x1F) are sent as ASCII sequences over the numeric keypad. CTRL Make Press function key (Refer to the ASCII Function Key Mapping Table on the following page) CTRL Break Function Key Mapping Exit Setup...

  • Page 34: Ascii Function Key Mapping Table

    ** Enter Setup ASCII Function Key Mapping Table ASCII Value ASCII Value Function Key Function Key （HEX） （HEX） Exit Setup...

  • Page 35: Usb Country Keyboard Types

    ** Enter Setup USB Country Keyboard Types Keyboard layouts vary from country to country. All supported keyboard types are listed below. ** 1 - U.S. 2 - Belgium 3 - Brazil 4 - Canada 5 - Czech 6 - Denmark 7 - Finland 8 - France Exit Setup...
  • Page 36 ** Enter Setup 9 - Austria 10 - Greece 11 - Hungary 12 - Israel 13 - Italy 14 - Latin America 15 - Netherland 16 - Norway 17 - Poland 18 - Portugal Exit Setup...
  • Page 37 ** Enter Setup 19 - Romania 20 - Russia 21 - Slovakia 22 - Spain 23 - Sweden 24 - Switzerland 25 - Turkey1 26 - Turkey 2 27 - UK 28 - Japan Exit Setup...

  • Page 38: Inter-Keystroke Delay

    ** Enter Setup Inter-Keystroke Delay This parameter specifies the delay between emulated keystrokes. ** No Delay Short Delay (5ms) Medium Delay (10ms) Long Delay (15ms) Exit Setup...

  • Page 39: Convert Case

    ** Enter Setup Convert Case This parameter is valid when the Standard Keyboard or Function Key Mapping is enabled. ** No Case Conversion Convert All to Upper Case Convert All to Lower Case Invert Upper and Lower Case Characters Example: When the Invert Upper and Lower Case Characters feature is enabled, barcode data “AbC” is transmitted as “aBc”.

  • Page 40: Emulate Numeric Keypad

    ** Enter Setup Emulate Numeric Keypad When this feature is disabled, sending barcode data is emulated as keystroke(s) on main keyboard. To enable this feature, scan the Emulate Numeric Keypad barcode. Sending a number (0-9) is emulated as keystroke on numeric keypad, whereas sending other character like “+”, “_”, “*” , “/” and “.” is still emulated as keystroke on main keyboard.

  • Page 41: Usb Datapipe

    ** Enter Setup USB DataPipe A driver is required when using this protocol to communicate with the scanner. USB DataPipe USB COM Port Emulation This feature allows the host to receive data in the way as a serial port does. However, you need to set communication parameters on the scanner to match the Host requirements.

  • Page 42: Hid-Pos

    ** Enter Setup HID-POS The HID-POS interface is recommended for new application programs. It can send up to 56 characters in a single USB report and appears more efficient than USB HID-KBW. Features:  HID based, no custom driver required. ...

  • Page 43: Access The Scanner With Your Program

    Every PID contains a base number and interface type (keyboard, COM port, etc.). Product Interface PID (Hex) PID (Dec) USB DataPipe 8001 32769 USB HID-KBW 8003 32771 QC 1D SERIES USB COM Port Emulation 8006 32774 HID-POS 8010 32784 Exit Setup...

  • Page 44: Chapter 5 Data Formatting

    ** Enter Setup Chapter 5 Data Formatting Introduction After a successful barcode read, a string containing numbers, letters or symbols will be returned. In real applications, barcode data may be found insufficient for your needs. You may wish to include additional information such as barcode type, data acquisition time or delimiter in data being scanned.

  • Page 45: Prefix Sequence

    ** Enter Setup Prefix Sequence ** Code ID+Custom+AIM ID Custom+Code ID+ AIM ID Exit Setup...

  • Page 46: Custom Prefix

    ** Enter Setup Custom Prefix Enable/Disable Custom Prefix If custom prefix is enabled, you are allowed to append to the data a user-defined prefix that cannot exceed 5 characters. For example, if barcode data is “123” and custom prefix is “AB”, the host will receive “AB123”. Enable Custom Prefix ** Disable Custom Prefix Set Custom Prefix...
  • Page 47 ** Enter Setup Scan the Exit Setup barcode. Exit Setup...

  • Page 48: Aim Id Prefix

    ** Enter Setup AIM ID Prefix AIM (Automatic Identification Manufacturers) ID defines symbology identifier (For the details, see the AIM ID Table section in Appendix). If AIM ID prefix is enabled, the scanner will add the symbology identifier before the scanned data after decoding. Enable AIM ID Prefix ** Disable AIM ID Prefix Exit Setup...

  • Page 49: Code Id Prefix

    ** Enter Setup CODE ID Prefix Code ID can also be used to identify barcode type. Unlike AIM ID, Code ID is user programmable. For the information of default Code ID, see the Code ID Table section in Appendix. Enable CODE ID Prefix ** Disable CODE ID Prefix Restore All Default Code IDs Restore All Default Code IDs...
  • Page 50 ** Enter Setup Set Code ID Barcodes Set Code 128 Code ID Set UCC/EAN-128 Code ID Set AIM 128 Code ID Set EAN-8 Code ID Set EAN-13 Code ID Set ISSN Code ID Set ISBN Code ID Set UPC-E Code ID Exit Setup...
  • Page 51 ** Enter Setup Set Code ID Barcodes (continued) Set UPC-A Code ID Set Interleaved 2 of 5 Code ID Set ITF-6 Code ID Set ITF-14 Code ID Set Deutsche 14 Code ID Set Deutsche 12 Code ID Set Matrix 2 of 5 Code ID Set Industrial 25 Code ID Exit Setup...
  • Page 52 ** Enter Setup Set Code ID Barcodes (continued) Set Standard 25 Code ID Set Code 39 Code ID Set Codabar Code ID Set Code 93 Code ID Set Code 11 Code ID Set Plessey Code ID Set MSI-Plessey Code ID Set RSS-14 Code ID Set RSS-Limited Code ID Set RSS-Expand Code ID...

  • Page 53: Custom Suffix

    ** Enter Setup Custom Suffix Enable/Disable Custom Suffix If custom suffix is enabled, you are allowed to append to the data a user-defined suffix that cannot exceed 5 characters. For example, if barcode data is “123” and custom suffix is “AB”, the host will receive “123AB”. Enable Custom Suffix ** Disable Custom Suffix Exit Setup...

  • Page 54: Set Custom Suffix

    ** Enter Setup Set Custom Suffix To set a custom suffix, scan the Set Custom Suffix barcode, the numeric barcodes corresponding to the hexadecimal value of a desired suffix and the Save barcode. Note: A custom suffix cannot exceed 5 characters. Set Custom Suffix Example: Set the custom suffix to “CODE”...

  • Page 55: Terminating Character Suffix

    ** Enter Setup Terminating Character Suffix A terminating character, such as carriage return (CR) and line feed (LF), can be used to mark the end of data, which means nothing can be added after it. A terminating character suffix cannot exceeed 5 characters. Enable/Disable Terminating Character Suffix This parameter determines whether to append predefined terminating character suffix to the data.

  • Page 56: Set Terminating Character Suffix

    ** Enter Setup Set Terminating Character Suffix The scanner provides a shortcut for setting the terminating character suffix to 0x0D (CR) or 0x0D,0x0A (CRLF) or 0x09 (Horizontal Tab), and enabling it by scanning the appropriate barcode below. Terminating Character 0x0D Terminating Character 0x0D,0x0A Terminating Character 0x09 Set Terminating Character Suffix...

  • Page 57: Chapter 6 Symbologies

    ** Enter Setup Chapter 6 Symbologies Introduction Every symbology (barcode type) has its own unique attributes. This chapter provides programming barcodes for configuring the scanner so that it can identify various barcode symbologies. It is recommended to disable those that are rarely used in order to increase the efficiency of the scanner. Global Settings Enable/Disable All Symbologies If all symbologies are disabled, the scanner can only identify programming barcodes.

  • Page 58: Code 128

    ** Enter Setup Code 128 Restore Factory Defaults Restore the Factory Defaults of Code 128 Enable/Disable Code 128 ** Enable Code 128 Disable Code 128 Exit Setup...

  • Page 59: Set Length Range For Code 128

    ** Enter Setup Set Length Range for Code 128 The scanner can be configured to only decode Code 128 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. The supported maximum length is 255 characters. If minimum length is set to be greater than maximum length, the scanner only decodes Code 128 barcodes with either the minimum or maximum length.

  • Page 60: Ucc/Ean-128

    ** Enter Setup UCC/EAN-128 Restore Factory Defaults Restore the Factory Defaults of UCC/EAN-128 Enable/Disable UCC/EAN-128 ** Enable UCC/EAN-128 Disable UCC/EAN-128 Decode as Code 128 Exit Setup...

  • Page 61: Set Length Range For Ucc/Ean-128

    ** Enter Setup Set Length Range for UCC/EAN-128 The scanner can be configured to only decode UCC/EAN-128 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. The supported maximum length is 255 characters. If minimum length is set to be greater than maximum length, the scanner only decodes UCC/EAN-128 barcodes with either the minimum or maximum length.

  • Page 62: Aim 128

    ** Enter Setup AIM 128 Restore Factory Defaults Restore the Factory Defaults of AIM 128 Enable/Disable AIM 128 Enable AIM 128 ** Disable AIM 128 Decode as Code 128 Exit Setup...
  • Page 63 ** Enter Setup Set Length Range for AIM 128 The scanner can be configured to only decode AIM 128 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. The supported maximum length is 255 characters. If minimum length is set to be greater than maximum length, the scanner only decodes AIM 128 barcodes with either the minimum or maximum length.

  • Page 64: Restore Factory Defaults

    ** Enter Setup EAN-8 Restore Factory Defaults Restore the Factory Defaults of EAN-8 Enable/Disable EAN-8 ** Enable EAN-8 Disable EAN-8 Transmit Check Digit EAN-8 is 8 digits in length with the last one as its check digit used to verify the integrity of the data. Exit Setup...
  • Page 65 ** Enter Setup ** Transmit EAN-8 Check Digit Do Not Transmit EAN-8 Check Digit Exit Setup...

  • Page 66: Add-On Code

    ** Enter Setup Add-On Code An EAN-8 barcode can be augmented with a two-digit or five-digit add-on code to form a new one. In the examples below, the part surrounded by blue dotted line is an EAN-8 barcode while the part circled by red dotted line is add-on code.

  • Page 67: Add-On Code Required

    ** Enter Setup Add-On Code Required This parameter is only valid when Enable 2-Digit Add-On Code and/or Enable 5-Digit Add-On Code is selected. EAN-8 Add-On Code Required ** EAN-8 Add-On Code Not Required EAN-8 Extension Disable EAN-8 Zero Extend: Transmit EAN-8 barcodes as is. Enable EAN-8 Zero Extend: Add five leading zeros to decoded EAN-8 barcodes to extend to13 digits.

  • Page 68: Restore Factory Defaults

    ** Enter Setup EAN-13 Restore Factory Defaults Restore the Factory Defaults of EAN-13 Enable/Disable EAN-13 ** Enable EAN-13 Disable EAN-13 Transmit Check Digit EAN-13 is 13 digits in length with the last one as its check digit used to verify the integrity of the data. ** Transmit EAN-13 Check Digit Do Not Transmit EAN-13 Check Digit Exit Setup...

  • Page 69: Add-On Code

    ** Enter Setup Add-On Code An EAN-13 barcode can be augmented with a two-digit or five-digit add-on code to form a new one. In the examples below, the part surrounded by blue dotted line is an EAN-13 barcode while the part circled by red dotted line is add-on code.

  • Page 70: Add-On Code Required

    ** Enter Setup Add-On Code Required This parameter is only valid when Enable 2-Digit Add-On Code and/or Enable 5-Digit Add-On Code is selected. EAN-13 Add-On Code Required ** EAN-13 Add-On Code Not Required Exit Setup...

  • Page 71: Issn

    ** Enter Setup ISSN Restore Factory Defaults Restore the Factory Defaults of ISSN Enable/Disable ISSN Enable ISSN ** Disable ISSN Decode as EAN-13 Exit Setup...

  • Page 72: Isbn

    ** Enter Setup ISBN Restore Factory Defaults Restore the Factory Defaults of ISBN Enable/Disable ISBN Enable ISBN ** Disable ISBN Decode as EAN-13 Exit Setup...

  • Page 73: Set Isbn Format

    ** Enter Setup Set ISBN Format ** ISBN-13 ISBN-10 Exit Setup...

  • Page 74: Upc-E

    ** Enter Setup UPC-E Restore Factory Defaults Restore the Factory Defaults of UPC-E Enable/Disable UPC-E ** Enable UPC-E Disable UPC-E Transmit Check Digit UPC-E is 8 digits in length with the last one as its check digit used to verify the integrity of the data. ** Transmit UPC-E Check Digit Do Not Transmit UPC-E Check Digit Exit Setup...

  • Page 75: Add-On Code

    ** Enter Setup Add-On Code A UPC-E barcode can be augmented with a two-digit or five-digit add-on code to form a new one. In the examples below, the part surrounded by blue dotted line is a UPC-E barcode while the part circled by red dotted line is add-on code.
  • Page 76 ** Enter Setup barcodes without add-on codes. Exit Setup...

  • Page 77: Add-On Code Required

    ** Enter Setup Add-On Code Required This parameter is only valid when Enable 2-Digit Add-On Code and/or Enable 5-Digit Add-On Code is selected. UPC-E Add-On Code Required ** UPC-E Add-On Code Not Required Transmit System Character The first character of UPC-E barcode is the system character. ** Do Not Transmit System Character Transmit System Character Exit Setup...

  • Page 78: Upc-E Extension

    ** Enter Setup UPC-E Extension Disable UPC-E Extend: Transmit UPC-E barcodes as is. Enable UPC-E Extend: Extend UPC-E barcodes to make them compatible in length to UPC-A. Convert UPC-E to UPC-A: Extend UPC-E barcodes to make them compatible in format to UPC-A. Enable UPC-E Extend **Disable UPC-E Extend Convert UPC-E to UPC-A...

  • Page 79: Upc-A

    ** Enter Setup UPC-A Restore Factory Defaults Restore the Factory Defaults of UPC-A Enable/Disable UPC-A ** Enable UPC-A Disable UPC-A Decode as EAN-13 Exit Setup...

  • Page 80: Transmit Check Digit

    ** Enter Setup Transmit Check Digit UPC-A is 13 digits in length with the last one as its check digit used to verify the integrity of the data. ** Transmit UPC-A Check Digit Do Not Transmit UPC-A Check Digit Transmit Preamble Character Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-A barcode.

  • Page 81: Add-On Code

    ** Enter Setup Add-On Code A UPC-A barcode can be augmented with a two-digit or five-digit add-on code to form a new one. In the examples below, the part surrounded by blue dotted line is a UPC-A barcode while the part circled by red dotted line is add-on code.
  • Page 82 ** Enter Setup barcodes without add-on codes. Exit Setup...

  • Page 83: Add-On Code Required

    ** Enter Setup Add-On Code Required This parameter is only valid when Enable 2-Digit Add-On Code and/or Enable 5-Digit Add-On Code is selected. UPC-A Add-On Code Required ** UPC-A Add-On Code Not Required Exit Setup...

  • Page 84: Interleaved 2 Of 5

    ** Enter Setup Interleaved 2 of 5 Restore Factory Defaults Restore the Factory Defaults of Interleaved 2 of 5 Enable/Disable Interleaved 2 of 5 ** Enable Interleaved 2 of 5 Disable Interleaved 2 of 5 Exit Setup...

  • Page 85: Check Digit Verification

    ** Enter Setup Check Digit Verification A check digit is optional for Interleaved 2 o 5 and can be added as the last digit. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits Interleaved 2 of 5 barcodes as is. Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Interleaved 2 of 5 barcodes to verify that the data complies with the check digit algorithm.
  • Page 86 ** Enter Setup Set Length Range for Interleaved 2 of 5 The scanner can be configured to only decode Interleaved 2 of 5 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. The supported maximum length is 255 characters. If minimum length is set to be greater than maximum length, the scanner only decodes Interleaved 2 of 5 barcodes with either the minimum or maximum length.

  • Page 87: Enable/Disable Itf-6

    ** Enter Setup ITF-6 ITF-6 is a special kind of Interleaved 2 of 5 with a length of 6 characters and the last character as the check character. Restore Factory Defaults Restore the Factory Defaults of ITF-6 Enable/Disable ITF-6 By default, ITF-6 is decoded as Interleaved 2 of 5. Disable ITF-6 Enable ITF-6 But Do Not Transmit Check Digit Enable ITF-6 and Transmit Check Digit...

  • Page 88: Enable/Disable Itf-14

    ** Enter Setup ITF-14 ITF-14 is a special kind of Interleaved 2 of 5 with a length of 14 characters and the last character as the check character. Restore Factory Defaults Restore the Factory Defaults of ITF-14 Enable/Disable ITF-14 By default, ITF-14 is decoded as Interleaved 2 of 5. Disable ITF-14 Enable ITF-14 But Do Not Transmit Check Digit Enable ITF-14 and Transmit Check Digit...

  • Page 89: Deutsche 14

    ** Enter Setup Deutsche 14 Restore Factory Defaults Restore the Factory Defaults of Deutsche 14 Enable/Disable Deutsche 14 By default, Deutsche 14 is decoded as Interleaved 2 of 5. Disable Deutsche 14 Enable Deutsche 14 But Do Not Transmit Check Digit Enable Deutsche 14 and Transmit Check Digit Note: It is advised not to enable Deutsche 14 unless necessary, because Deutsche 14, ITF-14 and Interleaved 2 of 5 use the same encoding method and enabling them at the same time can easily cause confusion with...

  • Page 90: Deutsche 12

    ** Enter Setup each other when decoding. Deutsche 12 Restore Factory Defaults Restore the Factory Defaults of Deutsche 12 Enable/Disable Deutsche 12 By default, Deutsche 12 is decoded as Interleaved 2 of 5. Disable Deutsche 12 Enable Deutsche 12 But Do Not Transmit Check Digit Enable Deutsche 12 and Transmit Check Digit Note: It is advised not to enable Deutsche 12 unless necessary, because Deutsche 12, ITF-12 and Interleaved Exit Setup...

  • Page 91: Matrix 2 Of 5 (European Matrix 2 Of 5)

    ** Enter Setup 2 of 5 use the same encoding method and enabling them at the same time can easily cause confusion with each other when decoding. Matrix 2 of 5 (European Matrix 2 of 5) Restore Factory Defaults Restore the Factory Defaults of Matrix 2 of 5 Enable/Disable Matrix 2 of 5 ** Enable Matrix 2 of 5 Disable Matrix 2 of 5...

  • Page 92: Check Digit Verification

    ** Enter Setup Check Digit Verification A check digit is optional for Matrix 2 of 5 and can be added as the last digit. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits Matrix 2 of 5 barcodes as is. Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Matrix 2 of 5 barcodes to verify that the data complies with the check digit algorithm.

  • Page 93: Set Length Range For Matrix 2 Of 5

    ** Enter Setup Set Length Range for Matrix 2 of 5 The scanner can be configured to only decode Matrix 2 of 5 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. The supported maximum length is 255 characters. If minimum length is set to be greater than maximum length, the scanner only decodes Matrix 2 of 5 barcodes with either the minimum or maximum length.

  • Page 94: Industrial 25

    ** Enter Setup Industrial 25 Restore Factory Defaults Restore the Factory Defaults of Industrial 25 Enable/Disable Industrial 25 ** Enable Industrial 25 Disable Industrial 25 Exit Setup...

  • Page 95: Check Digit Verification

    ** Enter Setup Check Digit Verification A check digit is optional for Industrial 25 and can be added as the last digit. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits Industrial 25 barcodes as is. Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Industrial 25 barcodes to verify that the data complies with the check digit algorithm.

  • Page 96: Set Length Range For Industrial 25

    ** Enter Setup Set Length Range for Industrial 25 The scanner can be configured to only decode Industrial 25 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. The supported maximum length is 255 characters. If minimum length is set to be greater than maximum length, the scanner only decodes Industrial 25 barcodes with either the minimum or maximum length.

  • Page 97: Standard 25

    ** Enter Setup Standard 25 Restore Factory Defaults Restore the Factory Defaults of Standard 25 Enable/Disable Standard 25 ** Enable Standard 25 Disable Standard 25 Exit Setup...

  • Page 98: Check Digit Verification

    ** Enter Setup Check Digit Verification A check digit is optional for Standard 25 and can be added as the last digit. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits Standard 25 barcodes as is. Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Standard 25 barcodes to verify that the data complies with the check digit algorithm.

  • Page 99: Set Length Range For Standard 25

    ** Enter Setup Set Length Range for Standard 25 The scanner can be configured to only decode Standard 25 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. The supported maximum length is 255 characters. If minimum length is set to be greater than maximum length, the scanner only decodes Standard 25 barcodes with either the minimum or maximum length.

  • Page 100: Code 39

    ** Enter Setup Code 39 Restore Factory Defaults Restore the Factory Defaults of Code 39 Enable/Disable Code 39 ** Enable Code 39 Disable Code 39 Exit Setup...

  • Page 101: Check Digit Verification

    ** Enter Setup Check Digit Verification A check digit is optional for Code 39 and can be added as the last digit. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits Code 39 barcodes as is. Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Code 39 barcodes to verify that the data complies with the check digit algorithm.

  • Page 102: Transmit Start/Stop Character

    ** Enter Setup Transmit Start/Stop Character Code 39 uses an asterisk (*) for both the start and the stop characters. You can choose whether or not to transmit the start/stop characters by scanning the appropriate barcode below. ** Transmit Start/Stop Character Do Not Transmit Start/Stop Character Enable/Disable Code 39 Full ASCII The scanner can be configured to identify all ASCII characters by scanning the appropriate barcode...

  • Page 103: Set Length Range For Code 39

    ** Enter Setup Set Length Range for Code 39 The scanner can be configured to only decode Code 39 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. The supported maximum length is 255 characters. If minimum length is set to be greater than maximum length, the scanner only decodes Code 39 barcodes with either the minimum or maximum length.

  • Page 104: Codabar

    ** Enter Setup Codabar Restore Factory Defaults Restore the Factory Defaults of Codabar Enable/Disable Codabar ** Enable Codabar Disable Codabar Exit Setup...

  • Page 105: Check Digit Verification

    ** Enter Setup Check Digit Verification A check digit is optional for Codabar and can be added as the last digit. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits Codabar barcodes as is. Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Codabar barcodes to verify that the data complies with the check digit algorithm.

  • Page 106: Start/Stop Character

    ** Enter Setup Start/Stop Character ** Transmit Start/Stop Character Do Not Transmit Start/Stop Character ** ABCD/ABCD as the Start/Stop Character ABCD/TN*E as the Start/Stop Character abcd/abcd as the Start/Stop Character abcd/tn*e as the Start/Stop Character Exit Setup...

  • Page 107: Set Length Range For Codabar

    ** Enter Setup Set Length Range for Codabar The scanner can be configured to only decode Codabar barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. The supported maximum length is 255 characters. If minimum length is set to be greater than maximum length, the scanner only decodes Codabar barcodes with either the minimum or maximum length.

  • Page 108: Code 93

    ** Enter Setup Code 93 Restore Factory Defaults Restore the Factory Defaults of Code 93 Enable/Disable Code 93 ** Enable Code 93 Disable Code 93 Exit Setup...

  • Page 109: Check Digit Verification

    ** Enter Setup Check Digit Verification Check digits are optional for Code 93 and can be added as the last two digits, which are calculated values used to verify the integrity of the data. Disable: The scanner transmits Code 93 barcodes as is. Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Code 93 barcodes to verify that the data complies with the check digit algorithm.

  • Page 110: Set Length Range For Code 93

    ** Enter Setup Set Length Range for Code 93 The scanner can be configured to only decode Code 93 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. The supported maximum length is 255 characters. If minimum length is set to be greater than maximum length, the scanner only decodes Code 93 barcodes with either the minimum or maximum length.

  • Page 111: Code 11

    ** Enter Setup Code 11 Restore Factory Defaults Restore the Factory Defaults of Code 11 Enable/Disable Code 11 Enable Code 11 ** Disable Code 11 Exit Setup...

  • Page 112: Check Digit Verification

    ** Enter Setup Check Digit Verification Check digits are optional for Code 11 and can be added as the last one or two digits, which are calculated values used to verify the integrity of the data. If the Disable option is enabled, the scanner transmits Code 11 barcodes as is. Disable ** One Check Digit, MOD11 Two Check Digits, MOD11/MOD11...
  • Page 113 ** Enter Setup Transmit Check Digit ** Do Not Transmit Check Digit Exit Setup...

  • Page 114: Set Length Range For Code 11

    ** Enter Setup Set Length Range for Code 11 The scanner can be configured to only decode Code 11 barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. The supported maximum length is 255 characters. If minimum length is set to be greater than maximum length, the scanner only decodes Code 11 barcodes with either the minimum or maximum length.

  • Page 115: Plessey

    ** Enter Setup Plessey Restore Factory Defaults Restore the Factory Defaults of Plessey Enable/Disable Plessey Enable Plessey ** Disable Plessey Exit Setup...

  • Page 116: Check Digit Verification

    ** Enter Setup Check Digit Verification Check digits are optional for Plessey and can be added as the last one or two digits, which are calculated values used to verify the integrity of the data. Disable: The scanner transmits Plessey barcodes as is. Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Plessey barcodes to verify that the data complies with the check digit algorithm.

  • Page 117: Set Length Range For Plessey

    ** Enter Setup Set Length Range for Plessey The scanner can be configured to only decode Plessey barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. The supported maximum length is 255 characters. If minimum length is set to be greater than maximum length, the scanner only decodes Plessey barcodes with either the minimum or maximum length.

  • Page 118: Msi-Plessey

    ** Enter Setup MSI-Plessey Restore Factory Defaults Restore the Factory Defaults of MSI-Plessey Enable/Disable MSI-Plessey Enable MSI-Plessey ** Disable MSI-Plessey Exit Setup...

  • Page 119: Check Digit Verification

    ** Enter Setup Check Digit Verification Check digits are optional for MSI-Plessey and can be added as the last one or two digits, which are calculated values used to verify the integrity of the data. If the Disable option is enabled, the scanner transmits MSI-Plessey barcodes as is. Disable ** One Check Digit, MOD10 Two Check Digits, MOD10/MOD10...

  • Page 120: Set Length Range For Msi-Plessey

    ** Enter Setup Set Length Range for MSI-Plessey The scanner can be configured to only decode MSI-Plessey barcodes with lengths that fall between (inclusive) the minimum and maximum lengths. The supported maximum length is 255 characters. If minimum length is set to be greater than maximum length, the scanner only decodes MSI-Plessey barcodes with either the minimum or maximum length.

  • Page 121: Restore Factory Defaults

    ** Enter Setup RSS-14 Restore Factory Defaults Restore the Factory Defaults of RSS-14 Enable/Disable RSS-14 ** Enable RSS-14 Disable RSS-14 Transmit Application Identifier “01” ** Transmit Application Identifier “01” Do Not Transmit Application Identifier “01” Exit Setup...

  • Page 122: Rss-Limited

    ** Enter Setup RSS-Limited Restore Factory Defaults Restore the Factory Defaults of RSS-Limited Enable/Disable RSS-Limited ** Enable RSS-Limited Disable RSS-Limited Transmit Application Identifier “01” ** Transmit Application Identifier “01” Do Not Transmit Application Identifier “01” Exit Setup...

  • Page 123: Rss-Expand

    ** Enter Setup RSS-Expand Restore Factory Defaults Restore the Factory Defaults of RSS-Expand Enable/Disable RSS-Expand ** Enable RSS-Expand Disable RSS-Expand Exit Setup...

  • Page 124: Appendix

    Appendix Factory Defaults Table Parameter Factory Default Remark System Settings Barcode Programming Enabled Programming Barcode Data Do not send Scan Mode Manual Mode Manual Mode Decode Session Timeout 1-255s; 0: infinite. Decode Session Timeout 1-255s; 0: infinite. Timeout between Decodes 1.0s 0.0-25.5s Continuous Mode Reread Same Barcode...
  • Page 125 Parameter Factory Default Remark Communication Interfaces Baud Rate 9600 Parity Check None RS-232 Interface Number of Data Bits Number of Stop Bits Flow Control None Other Options: DataPipe, USB USB Interface USB HID-KBW COM Port Emulation, HID-POS Input Mode Standard Keyboard USB Country Keyboard Type U.S.
  • Page 126 Parameter Factory Default Remark Code 128 Enabled Code 128 No less than 1 (including check Minimum Length digit) Maximum Length （ ） UCC/EAN-128 GS1-128 Enabled UCC/EAN-128 No less than 1 (including check Minimum Length digit) Maximum Length AIM 128 Disabled AIM 128 No less than 1 (including check Minimum Length...
  • Page 127 Parameter Factory Default Remark UPC-E Enabled UPC-E Transmit Check Digit Disabled 2-Digit Add-On Code Disabled 5-Digit Add-On Code Not required Add-On Code Disabled Extend to UPC-A Do not transmit System Character UPC-A Enabled UPC-A Transmit Check Digit Disabled 2-Digit Add-On Code Disabled 5-Digit Add-On Code Not required...
  • Page 128 Parameter Factory Default Remark Matrix 2 of 5 Matrix 2 of 5 Enabled Check Digit Verification Disabled Check Digit Do not transmit No less than 2 (including check Minimum Length digit) Maximum Length Industrial 25 Industrial 25 Enabled Check Digit Verification Disabled Check Digit Do not transmit...
  • Page 129 Parameter Factory Default Remark Codabar Codabar Enabled Check Digit Verification Disabled Check Digit Do not transmit Start/Stop Character Transmit Start/Stop Character Format ABCD/ABCD No less than 1 (including check Minimum Length digit) Maximum Length Code 93 Code 93 Enabled Check Digit Verification Enabled Check Digit Do not transmit...
  • Page 130 Parameter Factory Default Remark MSI-Plessey MSI-Plessey Disabled Check Digit Verification One check digit, MOD10 Check Digit Do not transmit No less than 2 (including check Minimum Length digit) Maximum Length RSS-14 RSS-14 Enabled AI (Application Identifier) Transmit RSS-Limited RSS-Limited Enabled AI (Application Identifier) Transmit RSS-Expand...
  • Page 131 AIM ID Table Symbology AIM ID Remark Code 128 Standard Code 128 UCC/EAN 128 FNC1 is the character right after the start character (GS1-128) AIM 128 FNC1 is the 2nd character after the start character Standard EAN-8 ]E4….]E1… EAN-8 EAN-8 + 2-Digit Add-On Code ]E4….]E2…...
  • Page 132 Symbology AIM ID Remark One check digit, MOD 7; transmit check digit Transmit barcodes as is; Full ASCII disabled; no check digit verification One check digit, MOD 43; transmit check digit One check digit, MOD 43; do not transmit check digit Code 39 Full ASCII enabled;...

  • Page 133: Code Id Table

    Code ID Table Symbology Code ID Code 128 UCC/EAN-128 AIM 128 SETTING 128 EAN-8 EAN-13 ISSN ISBN UPC-E UPC-A Interleaved 2 of 5 ITF-6 ITF-14 Deutsche 14 Deutsche 12 Matrix 2 of 5(European Matrix 2 of 5) Industrial 25 Standard 25 Code 39 Codabar Code 93...

  • Page 134: Ascii Table

    ASCII Table Char (Null char.) (Start of Header) (Start of Text) (End of Text) (End of Transmission) (Enquiry) (Acknowledgment) (Bell) (Backspace) (Horizontal Tab) (Line Feed) (Vertical Tab) (Form Feed) (Carriage Return) (Shift Out) (Shift In) (Data Link Escape) (XON) (Device Control 1) (Device Control 2) (XOFF) (Device Control 3) (Device Control 4)
  • Page 135 Char (Request to Send) (Unit Separator) (Space) (Exclamation Mark) " (Double Quote) (Number Sign) (Dollar Sign) (Percent) & (Ampersand) (Single Quote) (Right / Closing Parenthesis) (Right / Closing Parenthesis) (Asterisk) (Plus) (Comma) (Minus / Dash) (Dot) (Forward Slash) (Colon) (Semi-colon) <...
  • Page 136 Char > (Greater Than) (Question Mark) (AT Symbol) (Left / Opening Bracket) (Back Slash) (Right / Closing Bracket)
  • Page 137 Char (Caret / Circumflex) (Underscore) (Grave Accent) (Left/ Opening Brace) (Vertical Bar) (Right/Closing Brace) (Tilde) (Delete)

  • Page 138: Digit Barcodes

    Digit Barcodes 0 ~ 5...
  • Page 139 6~ 9...
  • Page 140 A ~ F...

  • Page 141: Save/Cancel Barcodes

    Save/Cancel Barcodes After reading numeric barcode(s), you need to scan the Save barcode to save the data. If you scan the wrong digit(s), you can either scan the Cancel the Last Digit barcode and then the correct digit, or scan the Cancel All Digits barcode and then the digits you want.

  • Page 142: F1~F12

    F1~F12 When the USB HID-KBW feature is enabled, scanning one of the following barcodes will send the corresponding function key. F1~F6...
  • Page 143 F7~F12...
  • Page 145 AdvanCode Technology Co., Ltd. 6F-5, No.81, Sec. 1, Xintai 5th Rd., Xishi Dist., New Taipei City, 221, Taiwan TEL : 886-2-7708-1569 FAX : 886-2-8698-4093 E-mail: info_adv@advancode.us www.advancode.com.tw...
  • Page 146 QC 2D Series : QC625X QC635x QC715X QC725X QC755X User Guide...
  • Page 147 Please read through the manual carefully before using the product and operate it according to the manual. It is advised that you should keep this manual for future reference. Do not disassemble the device or remove the seal label from the device. Otherwise, AdvanCode Technology Co., Ltd. does not assume responsibility for the warranty or replacement.
  • Page 148 Table Of Contents Chapter 1 Getting Started ..........................1 Introduction .............................. 1 About This Guide ............................. 1 Barcode Scanning ........................... 2 Barcode Programming ..........................2 Factory Defaults ............................3 Custom Defaults ............................3 Chapter 2 Communication Interfaces ......................4 Power-Saving Mode ..........................4 RS-232 Interface............................
  • Page 149 Auto Sleep ............................16 Sense Mode ............................17 Decode Session Timeout ....................... 17 Image Stabilization Timeout ......................17 Continue after Good Decode ......................18 Timeout between Decodes (Same Barcode) ................. 18 Sensitivity ............................19 Continuous Mode........................... 21 Decode Session Timeout ....................... 21 Timeout between Decodes ......................
  • Page 150 Chapter 7 Data Formatting ..........................32 General Settings ............................ 33 Enable/Disable All Prefix/Suffix ...................... 33 Prefix Sequences ..........................33 Custom Prefix ............................34 Enable/Disable Custom Prefix ......................34 Set Custom Prefix ........................... 34 AIM ID Prefix ............................35 Code ID Prefix ............................35 Restore All Default Code IDs......................
  • Page 151 AIM-128 ............................46 Restore Factory Defaults......................46 Enable/Disable AIM-128......................46 Set Length Range for AIM-128 ....................46 EAN-8 ............................. 47 Restore Factory Defaults......................47 Enable/Disable EAN-8 ......................47 Transmit Check Digit ....................... 48 Add-On Code ........................... 48 Add-On Code Required ......................49 EAN-8 Extension ........................
  • Page 152 Add-On Code Required ......................57 Transmit System Character “0” ....................58 UPC-E Extension ........................58 UPC-A ............................. 59 Restore Factory Defaults......................59 Enable/Disable UPC-A ......................59 Transmit Check Digit ....................... 59 Add-On Code ........................... 60 Add-On Code Required ......................60 Transmit Preamble Character “0”...
  • Page 153 Restore Factory Defaults......................72 Enable/Disable Code 39......................72 Transmit Start/Stop Character ....................72 Set Length Range for Code 39 ....................73 Check Digit Verification ......................73 Enable/Disable Code 39 Full ASCII ..................73 Codabar ............................74 Restore Factory Defaults......................74 Enable/Disable Codabar ......................
  • Page 154 MSI-Plessey ............................ 84 Restore Factory Defaults......................84 Enable/Disable MSI-Plessey ....................84 Set Length Range for MSI-Plessey ..................84 Transmit Check Digit ....................... 85 Check Digit Verification ......................85 2D Symbologies ............................. 86 PDF 417 ............................86 Restore Factory Defaults......................86 Enable/Disable PDF 417 ......................
  • Page 155 FAQ ................................ 97 Appendix ................................99 Appendix 1: Factory Defaults Table ...................... 99 Appendix 2: AIM ID Table ........................106 Appendix 3: Code ID Table ......................... 108 Appendix 4: ASCII Table ........................109 Appendix 5: Parameter Programming Examples ................113 a.

  • Page 156: Chapter 1 Getting Started

    The ADVANCODE 2D BARCODE SCANNER support all mainstream 1D and standard 2D barcode symbologies (e.g., PDF417, QR Code M1/M2/Micro and Data Matrix) as well as GS1-DataBarTM(RSS) (Limited/Stacked/Expanded versions).

  • Page 157: Barcode Scanning

    Powered by area-imaging technology, the ADVANCODE 2D BARCODE SCANNER features fast scanning and accurate decoding. Barcodes rotated at any angle can still be read with ease. When scanning a barcode, simply center the aiming beam or pattern projected by the ADVANCODE 2D BARCODE SCANNER over the barcode.

  • Page 158: Factory Defaults

    Enter Setup Factory Defaults Scanning the following barcode can restore the scanner to the factory defaults. See Appendix 1: Factory Defaults Table for more information. Note: Use this feature with discretion. Restore All Factory Defaults Custom Defaults Custom defaults make it possible to save the frequently-used settings on the scanner. Scanning the Save as Custom Defaults barcode can save the current settings as custom defaults.

  • Page 159: Chapter 2 Communication Interfaces

    Enter Setup Chapter 2 Communication Interfaces The ADVANCODE 2D BARCODE SCANNER provides a RS-232 interface and a USB interface to communicate with the host device. The host device can receive scanned data and send commands to control the scanner or to access/alter the configuration information of the scanner via the interface.

  • Page 160: Rs-232 Interface

    Enter Setup RS-232 Interface Serial communication interface is usually used when connecting the scanner to a host device (like PC, POS). However, to ensure smooth communication and accuracy of data, you need to set communication parameters (including baud rate, parity check, data bit and stop bit) to match the host device. The serial communication interface provided by the scanner is based on TTL-level signals.
  • Page 161 Enter Setup Baud Rate Baud rate is the number of bits of data transmitted per second. Set the baud rate to match the Host requirements. ** 9600 1200 19200 2400 38400 4800 57600 14400 115200 * Exit Setup...

  • Page 162: Data Bit

    Enter Setup Parity Check When the number of data bits is set to 7, you can only select either Even Parity or Odd Parity. The None option will be regarded as Even Parity in this case. ** None Even Parity Odd Parity Data Bit When the number of data bits is set to 7, you can only select either Even Parity or Odd Parity.

  • Page 163: Data Bit & Parity Check

    Enter Setup Data Bit & Parity Check 7 Data Bits/Even Parity 7 Data Bits/Odd Parity ** 8 Data Bits/ No Parity 8 Data Bits/Even Parity 8 Data Bits/Odd Parity Stop Bit ** 1 Stop Bit 2 Stop Bits * Exit Setup...

  • Page 164: Usb Interface

    Enter Setup USB Interface USB Enumeration If the scanner is connected to the Host via a USB connection, the scanner will be enumerated using S/N or “00000000” after power-up. Enumeration using S/N enables the Host to distinguish even between scanners of same model. Enumeration using “00000000” disables the Host from distinguishing between scanners of same model.

  • Page 165: Usb Country Keyboard Types

    Enter Setup USB Country Keyboard Types Keyboard layouts vary from country to country. The default setting is U.S. keyboard. ** U.S. Japan Denmark Finland France Turkey_F Italy Norway * Exit Setup...
  • Page 166 Enter Setup Spain Turkey_Q Austria, Germany Belgium Russia Sweden Portugal * Exit Setup...

  • Page 167: Beep On Unknown Character

    Enter Setup Beep on Unknown Character Due to the differences in keyboard layouts, some characters contained in barcode data may be unavailable on the selected keyboard. As a result, the scanner fails to transmit the unknown characters. Scan the appropriate barcode below to enable or disable the emission of beep when an unknown character is detected.

  • Page 168: Convert Case

    Enter Setup Convert Case Scan the appropriate barcode below to convert barcode data to your desired case. ** No Case Conversion Invert Upper and Lower Case Characters Convert All to Upper Case Convert All to Lower Case Example: When the Convert All to Lower Case feature is enabled, barcode data “AbC” is transmitted as “abc”.

  • Page 169: Chapter 3 Scan Mode

    Enter Setup Chapter 3 Scan Mode Batch Mode If the Batch Mode is enabled, driving the TRIG pin on the host interface connector low activates a round of multiple decode sessions. This round of multiple scans continues until the active trigger signal is no longer present.

  • Page 170: Trigger Mode

    Enter Setup Trigger Mode If the Trigger Mode is enabled, driving the TRIG pin on the host interface connector low activates a decode session. The session continues until the barcode is decoded or decode session timeout expires or the active trigger signal is no longer present. For good decode, the scanner transmits decoded data via communication port.

  • Page 171: Level Trigger/Pulse Trigger

    Enter Setup Level Trigger/Pulse Trigger Level trigger: Decode session is activated and continued by constant active trigger signal. The decode session ends once the barcode is decoded or decode session timeout expires. Pulse trigger: Decode session is activated by electric pulse of trigger signal. The decode session continues until the barcode is decoded or decode session timeout expires.

  • Page 172: Sense Mode

    Enter Setup Sense Mode If the Sense Mode is enabled, the scanner activates a decode session every time it detects a change in ambient illumination. The decode session continues until the barcode is decoded or the decode session timeout expires. Driving the TRIG pin on the host interface connector low can also activate a decode session.

  • Page 173: Continue After Good Decode

    Enter Setup Continue after Good Decode Continue after Good Decode: The scanner starts next decode session after good decode. Pause after Good Decode: The scanner starts another round of illumination monitoring and image stabilization after good decode. ** Pause after Good Decode Continue after Good Decode Timeout between Decodes (Same Barcode) Timeout between Decodes (Same Barcode) can avoid undesired rereading of same barcode in a given...

  • Page 174: Sensitivity

    Enter Setup The following parameter sets the timeout between decodes for same barcode. It is programmable in 1ms increments from 0ms to 65,535ms. The default setting is 1,500ms. To learn how to program this parameter, see Appendix 5. Timeout between Decodes (Same Barcode) Sensitivity Sensitivity specifies the degree of acuteness of the scanner’s response to changes in ambient illumination.
  • Page 175 Enter Setup If the above four options fail to meet your needs, you may program the threshold value of illumination change. Illumination changes that reaches or surpasses the predefined threshold value will cause the scanner to start a decode session. The lower the threshold value, the greater the sensitivity of the scanner. The default threshold value is 2.

  • Page 176: Continuous Mode

    Enter Setup Continuous Mode This mode enables the scanner to scan/capture, decode and transmit over and over again. When the scanner is operating in Continuous Mode, barcode reading can be suspended/resumed through control over the trigger signal. When barcode reading is in progress, negating the trigger signal after having maintained it for 30ms or longer will suspend barcode reading;...

  • Page 177: Cellphone Read Mode

    Enter Setup Cellphone Read Mode **Disable Cellphone Read Mode Enable Cellphone Read Mode * Exit Setup...

  • Page 178: Chapter 4 Scanning Preferences

    Enter Setup Chapter 4 Scanning Preferences Introduction This chapter contains information as to how to adapt your scanner to various applications with preference setting. For instance, to narrow the field of view of the scanner to make sure it reads only those barcodes intended by the user.

  • Page 179: Specify Central Area

    Enter Setup Specify Central Area The default central area is a (Width*20%) by (Height*20%) area in the center of the scanner’s field of view, as shown in the figure below. You can define the central area by scanning the Specify Central Area barcode and numeric barcode(s) corresponding to a desired percentage (1-100).

  • Page 180: Chapter 5 Illumination & Aiming

    Enter Setup Chapter 5 Illumination & Aiming Illumination A couple of illumination options are provided to improve the lighting conditions during every image capture: Normal: Illumination LEDs are turned on during image capture. Always ON: Illumination LEDs keep ON after the scanner is powered on. OFF: Illumination LEDs are OFF all the time.

  • Page 181: Aiming

    Enter Setup Aiming When scanning/capturing image, the scanner projects an aiming pattern which allows positioning the target barcode within its field of view and thus makes decoding easier. Normal: The scanner projects an aiming pattern only during barcode scanning/capture. Always ON: Aiming pattern is constantly ON after the scanner is powered on. OFF: Aiming pattern is OFF all the time.

  • Page 182: Chapter 6 Beep & Led Indications

    Enter Setup Chapter 6 Beep & LED Indications Startup Beep If startup beep is enabled, the scanner will beep after being turned on. ** Enable Startup Beep Disable Startup Beep * Exit Setup...

  • Page 183: Beep After Good Decode (Non-Programming Barcode)

    Enter Setup Beep after Good Decode (Non-programming Barcode) The scanner can provide a PWM output to an external driver circuit to drive a beeper after decoding a non-programming barcode. Scan the appropriate barcode below to enable or disable the emission of good decode beep.

  • Page 184: Beep Volume

    Enter Setup Beep Volume ** Loud Medium Beep on Unknown Character Due to the differences in keyboard layouts, some characters contained in barcode data may be unavailable on the selected keyboard (USB HID-KBW). As a result, the scanner fails to transmit the unknown characters.

  • Page 185: Beep After Good Decode (Programming Barcode)

    Enter Setup Beep after Good Decode (Programming Barcode) ** Beep after Good Decode, Programming Barcode Do Not Beep after Good Decode, Programming Barcode LED Notification for Good Decode ** Good Decode LED Notification ON Good Decode LED Notification OFF * Exit Setup...

  • Page 186: Transmit Ngr Message

    Enter Setup Transmit NGR Message Scan a barcode below to select whether or not to transmit a user-defined NGR (Not Good Read) message when a barcode is not decoded. Transmit NGR Message ** Do Not Transmit NGR Message Edit NGR Message To edit an NGR message, scan the Edit NGR Message barcode and the numeric barcodes corresponding to the ASCII values (decimal) of desired characters and then scan the Save barcode.

  • Page 187: Chapter 7 Data Formatting

    Enter Setup Chapter 7 Data Formatting In many applications, barcode data needs to be edited and distinguished from one another. Usually AIM ID and Code ID can be used as identifiers, but in some special cases customized prefix and terminating character suffix like Carriage Return or Line Feed can also be the alternatives. Data formatting may include: ...

  • Page 188: General Settings

    Enter Setup General Settings Enable/Disable All Prefix/Suffix Disable All Prefix/Suffix: Transmit barcode data with no prefix/suffix. Enable All Prefix/Suffix: Allow user to append Code ID prefix, AIM ID prefix, custom prefix/suffix and terminating character to the barcode data before the transmission. Enable All Prefix/Suffix Disable All Prefix/Suffix Prefix Sequences...

  • Page 189: Custom Prefix

    Enter Setup Custom Prefix Enable/Disable Custom Prefix If custom prefix is enabled, you are allowed to append to the data a user-defined prefix that cannot exceed 10 characters. Enable Custom Prefix ** Disable Custom Prefix Set Custom Prefix To set a custom prefix, scan the Set Custom Prefix barcode and the numeric barcodes representing the hexadecimal values of a desired prefix and then scan the Save barcode.

  • Page 190: Aim Id Prefix

    Enter Setup AIM ID Prefix AIM (Automatic Identification Manufacturers) IDs and ISO/IEC 15424 standards define symbology identifiers and data carrier identifiers. (For the details, see the “Appendix 2: AIM ID Table” section). If AIM ID prefix is enabled, the scanner will add the symbology identifier before the scanned data after decoding.

  • Page 191: Modify Code Id

    Enter Setup Modify Code ID Code ID of each symbology can be programmed separately. See the following example to learn how to program a Code ID. Example: Set the Code ID of PDF417 to “p” Check the hex value of “p” in the ASCII Table. (“p”: 70) Scan the Enter Setup barcode.
  • Page 192 Enter Setup Modify EAN-8 Code ID Modify EAN-13 Code ID Modify UPC-E Code ID Modify UPC-A Code ID Modify ISBN Code ID Modify ISSN Code ID Modify Code 39 Code ID Modify Code 93 Code ID Modify Interleaved 2 of 5 Code ID Modify ITF-14 Code ID * Exit Setup...
  • Page 193 Enter Setup Modify ITF-6 Code ID Modify Codabar Code ID Modify Industrial 25 Code ID Modify Standard 25 Code ID Modify Matrix 25 Code ID Modify COOP 25 Code ID Modify Code 11 Code ID Modify Plessey Code ID Modify MSI/Plessey Code ID Modify GS1 Databar Code ID * Exit Setup...

  • Page 194: Custom Suffix

    Enter Setup Custom Suffix Enable/Disable Custom Suffix If custom suffix is enabled, you are allowed to append to the data a user-defined suffix that cannot exceed 10 characters. Enable Custom Suffix Disable Custom Suffix Set Custom Suffix To set a custom suffix, scan the Set Custom Suffix barcode and the numeric barcodes representing the hexadecimal values of a desired suffix and then scan the Save barcode.

  • Page 195: Terminating Character Suffix

    Enter Setup Terminating Character Suffix A terminating character can be used to mark the end of data, which means nothing can be added after it. A terminating character suffix can contain one or two characters. Enable/Disable Terminating Character Suffix To enable/disable terminating character suffix, scan the appropriate barcode below. Enable Terminating Character Suffix Disable Terminating Character Suffix * Exit Setup...

  • Page 196: Set Terminating Character Suffix

    Enter Setup Set Terminating Character Suffix The scanner provides a shortcut for setting the terminating character suffix to 0x0D or 0x0D,0x0A by scanning the following barcode. Terminating Character 0x0D Terminating Character 0x0D,0x0A To set a terminating character suffix, scan the Set Terminating Character Suffix barcode and the numeric barcodes representing the hexadecimal value of a desired terminating character and then scan the Save barcode.

  • Page 197: Chapter 8 Symbologies

    Enter Setup Chapter 8 Symbologies General Settings Enable/Disable All Symbologies If the Disable All Symbologies feature is enabled, the scanner will not be able to read any non-programming barcodes except the programming barcodes. Enable All Symbologies Disable All Symbologies Enable/Disable 1D Symbologies If the Disable 1D Symbologies feature is enabled, the scanner will not be able to read any 1D barcodes.

  • Page 198: Video Reverse

    Enter Setup Video Reverse Regular barcode: Dark image on a bright background. Inverse barcode: Bright image on a dark background. The examples of regular barcode and inverse barcode are shown below. Regular Barcode Inverse Barcode Video Reverse is used to allow the scanner to read barcodes that are inverted. Video Reverse ON: Read both regular barcodes and inverse barcodes.

  • Page 199: 1D Symbologies

    Enter Setup 1D Symbologies Code 128 Restore Factory Defaults Restore the Factory Defaults of Code 128 Enable/Disable Code 128 Enable Code 128 Disable Code 128 Set Length Range for Code 128 Set the Minimum Length Set the Maximum Length * Exit Setup...

  • Page 200: Gs1-128 (Ucc/Ean-128)

    Enter Setup GS1-128 (UCC/EAN-128) Restore Factory Defaults Restore the Factory Defaults of GS1-128 Enable/Disable GS1-128 Enable GS1-128 Disable GS1-128 Set Length Range for GS1-128 Set the Minimum Length Set the Maximum Length * Exit Setup...
  • Page 201 Enter Setup AIM-128 Restore Factory Defaults Restore the Factory Defaults of AIM-128 Enable/Disable AIM-128 ** Enable AIM-128 Disable AIM-128 Set Length Range for AIM-128 Set the Minimum Length Set the Maximum Length * Exit Setup...
  • Page 202 Enter Setup EAN-8 Restore Factory Defaults Restore the Factory Defaults of EAN-8 Enable/Disable EAN-8 ** Enable EAN-8 Disable EAN-8 * Exit Setup...

  • Page 203: Add-On Code

    Enter Setup Transmit Check Digit EAN-8 is 8 digits in length with the last one as its check digit used to verify the integrity of the data. Transmit EAN-8 Check Digit Do Not Transmit EAN-8 Check Digit Add-On Code An EAN-8 barcode can be augmented with a two-digit or five-digit add-on code to form a new one. In the examples below, the part surrounded by blue dotted line is an EAN-8 barcode while the part circled by red dotted line is add-on code.

  • Page 204: Add-On Code Required

    Enter Setup Add-On Code Required When EAN-8 Add-On Code Required is selected, the scanner will only read EAN-8 barcodes that contain add-on codes. EAN-8 Add-On Code Required ** EAN-8 Add-On Code Not Required EAN-8 Extension Disable EAN-8 Zero Extend: Transmit EAN-8 barcodes as is. Enable EAN-8 Zero Extend: Add five leading zeros to decoded EAN-8 barcodes to extend to13 digits.

  • Page 205: Transmit Check Digit

    Enter Setup EAN-13 Restore Factory Defaults Restore the Factory Defaults of EAN-13 Enable/Disable EAN-13 ** Enable EAN-13 Disable EAN-13 Transmit Check Digit Transmit EAN-13 Check Digit Do Not Transmit EAN-13 Check Digit * Exit Setup...

  • Page 206: Add-On Code

    Enter Setup Add-On Code An EAN-13 barcode can be augmented with a two-digit or five-digit add-on code to form a new one. Enable 2-Digit Add-On Code Disable 2-Digit Add-On Code Enable 5-Digit Add-On Code Disable 5-Digit Add-On Code Enable 2-Digit Add-On Code/ Enable 5-Digit Add-On Code: The scanner decodes a mix of EAN-13 barcodes with and without 2-digit/5-digit add-on codes.

  • Page 207: Issn

    Enter Setup ISSN Restore Factory Defaults Restore the Factory Defaults of ISSN Enable/Disable ISSN Enable ISSN ** Disable ISSN * Exit Setup...

  • Page 208: Add-On Code

    Enter Setup Add-On Code An ISSN barcode can be augmented with a two-digit or five-digit add-on code to form a new one. Enable 2-Digit Add-On Code Disable 2-Digit Add-On Code Enable 5-Digit Add-On Code Disable 5-Digit Add-On Code Enable 2-Digit Add-On Code/ Enable 5-Digit Add-On Code: The scanner decodes a mix of ISSN barcodes with and without 2-digit/5-digit add-on codes.

  • Page 209: Isbn

    Enter Setup ISBN Restore Factory Default Restore the Factory Defaults of ISBN Enable/Disable ISBN ** Enable ISBN Disable ISBN Set ISBN Format **ISBN-13 ISBN-10 * Exit Setup...

  • Page 210: Add-On Code

    Enter Setup Add-On Code An ISBN barcode can be augmented with a two-digit or five-digit add-on code to form a new one. Enable 2-Digit Add-On Code Disable 2-Digit Add-On Code Enable 5-Digit Add-On Code Disable 5-Digit Add-On Code Enable 2-Digit Add-On Code/ Enable 5-Digit Add-On Code: The scanner decodes a mix of ISBN barcodes with and without 2-digit/5-digit add-on codes.

  • Page 211: Upc-E

    Enter Setup UPC-E Restore Factory Defaults Restore the Factory Defaults of UPC-E Enable/Disable UPC-E Enable UPC-E Disable UPC-E Transmit Check Digit Transmit UPC-E Check Digit Do Not Transmit UPC-E Check Digit * Exit Setup...

  • Page 212: Add-On Code

    Enter Setup Add-On Code A UPC-E barcode can be augmented with a two-digit or five-digit add-on code to form a new one. Enable 2-Digit Add-On Code Enable 2-Digit Add-On Code Enable 5-Digit Add-On Code Disable 5-Digit Add-On Code Enable 2-Digit Add-On Code/ Enable 5-Digit Add-On Code: The scanner decodes a mix of UPC-E barcodes with and without 2-digit/5-digit add-on codes.

  • Page 213: Transmit System Character "0

    Enter Setup Transmit System Character “0” The first character of UPC-E barcode is the system character “0”. Transmit System Character “0” Do Not Transmit System Character “0” UPC-E Extension Disable UPC-E Extend: Transmit UPC-E barcodes as is. Enable UPC-E Extend”: Extend UPC-E barcodes to make them compatible in length to UPC-A. Enable UPC-E Extend Disable UPC-E Extend * Exit Setup...

  • Page 214: Upc-A

    Enter Setup UPC-A Restore Factory Defaults Restore the Factory Defaults of UPC-A Enable/Disable UPC-A Enable UPC-A Disable UPC-A Transmit Check Digit Transmit UPC-A Check Digit Do Not Transmit UPC-A Check Digit * Exit Setup...

  • Page 215: Add-On Code

    Enter Setup Add-On Code A UPC-A barcode can be augmented with a two-digit or five-digit add-on code to form a new one. Enable 2-Digit Add-On Code Disable 2-Digit Add-On Code Enable 5-Digit Add-On Code Disable 5-Digit Add-On Code Enable 2-Digit Add-On Code/ Enable 5-Digit Add-On Code: The scanner decodes a mix of UPC-A barcodes with and without 2-digit/5-digit add-on codes.

  • Page 216: Transmit Preamble Character "0

    Enter Setup Transmit Preamble Character “0” Transmit Preamble Character “0” Do not Transmit Preamble Character “0” Note: The preamble character “0” usually does not appear in printed UPC-A barcodes. * Exit Setup...

  • Page 217: Interleaved 2 Of 5

    Enter Setup Interleaved 2 of 5 Restore Factory Defaults Restore the Factory Defaults of Interleaved 2 of 5 Enable/Disable Interleaved 2 of 5 ** Enable Interleaved 2 of 5 Disable Interleaved 2 of 5 Set Length Range for Interleaved 2 of 5 Set the Minimum Length Set the Maximum Length * Exit Setup...

  • Page 218: Check Digit Verification

    Enter Setup Check Digit Verification A check digit is optional for Interleaved 2 o 5 and can be added as the last digit. It is a calculated value used to verify the integrity of the data. Disable: The scanner transmits Interleaved 2 of 5 barcodes as is. Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Interleaved 2 of 5 barcodes to verify that the data complies with the check digit algorithm.
  • Page 219 Enter Setup ITF-14 ITF-14 is a special kind of Interleaved 2 of 5 with a length of 14 characters and the last character as the check character. Restore the Factory Defaults of ITF-14 Disable ITF-14 Enable ITF-14 But Do Not Transmit Check Digit Enable ITF-14 and Transmit Check Digit Note: It is advisable not to enable ITF-14 and Interleaved 2 of 5 at the same time.
  • Page 220 Enter Setup ITF-6 ITF-6 is a special kind of Interleaved 2 of 5 with a length of 6 characters and the last character as the check character. Restore the Factory Defaults of ITF-6 ** Disable ITF-6 Enable ITF-6 But Do Not Transmit Check Digit Enable ITF-6 and Transmit Check Digit Note: It is advisable not to enable ITF-6 and Interleaved 2 of 5 at the same time.

  • Page 221: Matrix 2 Of 5

    Enter Setup Matrix 2 of 5 Restore Factory Defaults Restore the Factory Defaults of Matrix 2 of 5 Enable/Disable Matrix 2 of 5 Enable Matrix 2 of 5 ** Disable Matrix 2 of 5 Set Length Range for Matrix 2 of 5 Set the Minimum Length Set the Maximum Length * Exit Setup...

  • Page 222: Check Digit Verification

    Enter Setup Check Digit Verification Disable Do Not Transmit Check Digit After Verification Transmit Check Digit After Verification * Exit Setup...

  • Page 223: Industrial 2 Of 5

    Enter Setup Industrial 2 of 5 Restore Factory Defaults Restore the Factory Defaults of Industrial 2 of 5 Enable/Disable Industrial 2 of 5 Enable Industrial 2 of 5 Disable Industrial 2 of 5 Set Length Range for Industrial 2 of 5 Set the Minimum Length Set the Maximum Length * Exit Setup...

  • Page 224: Check Digit Verification

    Enter Setup Check Digit Verification Disable Transmit Check Digit After Verification Do Not Transmit Check Digit After Verification * Exit Setup...

  • Page 225: Standard 2 Of 5（Iata 2 Of 5

    Enter Setup Standard 2 of 5（IATA 2 of 5） Restore Factory Defaults Restore the Factory Defaults of Standard 25 Enable/Disable Standard 25 Enable Standard 25 Disable Standard 25 Set Length Range for Standard 25 Set the Minimum Length Set the Maximum Length * Exit Setup...

  • Page 226: Check Digit Verification

    Enter Setup Check Digit Verification Disable Transmit Check Digit After Verification Do Not Transmit Check Digit After Verification * Exit Setup...

  • Page 227: Code 39

    Enter Setup Code 39 Restore Factory Defaults Restore the Factory Defaults of Code 39 Enable/Disable Code 39 ** Enable Code 39 Disable Code 39 Transmit Start/Stop Character Transmit Start/Stop Character Do not Transmit Start/Stop Character * Exit Setup...

  • Page 228: Set Length Range For Code 39

    Enter Setup Set Length Range for Code 39 Set the Minimum Length Set the Maximum Length Check Digit Verification Disable Transmit Check Digit After Verification Do Not Transmit Check Digit After Verification Enable/Disable Code 39 Full ASCII The scanner can be configured to identify all ASCII characters by scanning the appropriate barcode below.

  • Page 229: Codabar

    Enter Setup Codabar Restore Factory Defaults Restore the Factory Defaults of Codabar Enable/Disable Codabar ** Enable Codabar Disable Codabar Set Length Range for Codabar Set the Minimum Length Set the Maximum Length * Exit Setup...

  • Page 230: Check Digit Verification

    Enter Setup Check Digit Verification Disable Transmit Check Digit After Verification Do Not Transmit Check Digit After Verification Transmit Start/Stop Character Transmit Start/Stop Character Do not Transmit Start/Stop Character * Exit Setup...

  • Page 231: Start/Stop Character Format

    Enter Setup Start/Stop Character Format You can choose your desired start/stop character format by scanning the appropriate barcode below. ** ABCD/ABCD as the Start/Stop Character ABCD/TN*E as the Start/Stop Character Start/Stop Character in Uppercase Start/Stop Character in Lowercase * Exit Setup...

  • Page 232: Code 93

    Enter Setup Code 93 Restore Factory Defaults Restore the Factory Defaults of Code 93 Enable/Disable Code 93 ** Enable Code 93 Disable Code 93 Set Length Range for Code 93 Set the Minimum Length Set the Maximum Length * Exit Setup...

  • Page 233: Check Digit Verification

    Enter Setup Check Digit Verification Disable Do Not Transmit Check Digit After Verification Transmit Check Digit After Verification * Exit Setup...

  • Page 234: Gs1-Databar (Rss)

    Enter Setup GS1-Databar (RSS) Restore Factory Defaults Restore the Factory Defaults of GS1-Databar Enable/Disable GS1 Databar ** Enable GS1-DataBar Disable GS1-DataBar Transmit Application Identifier “01” Transmit Application Identifier “01” Do Not Transmit Application Identifier “01” * Exit Setup...

  • Page 235: Code 11

    Enter Setup Code 11 Restore Factory Defaults Restore the Factory Defaults of Code 11 Enable/Disable Code 11 ** Enable Code 11 Disable Code 11 Set Length Range for Code 11 Set the Minimum Length Set the Maximum Length * Exit Setup...

  • Page 236: Transmit Check Digit

    Enter Setup Transmit Check Digit Transmit Check Digit ** Do Not Transmit Check Digit Check Digit Verification Disable One Check Digit, MOD11 Two Check Digits, MOD11/MOD11 Two Check Digits, MOD11/MOD9 One Check Digit, MOD11 (Len<=10) One Check Digit, MOD11 (Len<=10) Two Check Digits, MOD11/MOD11 (Len>10) Two Check Digits, MOD11/MOD9 (Len>10)

  • Page 237: Plessey

    Enter Setup Plessey Restore Factory Defaults Restore the Factory Defaults of Plessey Enable/Disable Plessey ** Enable Plessey Disable Plessey Set Length Range for Plessey Set the Minimum Length Set the Maximum Length * Exit Setup...

  • Page 238: Check Digit Verification

    Enter Setup Check Digit Verification Disable Do Not Transmit Check Digit After Verification Transmit Check Digit After Verification * Exit Setup...

  • Page 239: Msi-Plessey

    Enter Setup MSI-Plessey Restore Factory Defaults Restore the Factory Defaults of MSI-Plessey Enable/Disable MSI-Plessey ** Enable MSI-Plessey Disable MSI-Plessey Set Length Range for MSI-Plessey Set the Minimum Length Set the Maximum Length * Exit Setup...

  • Page 240: Transmit Check Digit

    Enter Setup Transmit Check Digit Transmit Check Digit Do Not Transmit Check Digit Check Digit Verification Disable One Check Digit, MOD10 Two Check Digits, MOD10/MOD10 Two Check Digits, MOD10/MOD11 * Exit Setup...

  • Page 241: 2D Symbologies

    Enter Setup 2D Symbologies PDF 417 Restore Factory Defaults Restore the Factory Defaults of PDF 417 Enable/Disable PDF 417 ** Enable PDF 417 Disable PDF 417 Set Length Range for PDF 417 Set the Minimum Length Set the Maximum Length * Exit Setup...

  • Page 242: Pdf 417 Twin Code

    Enter Setup PDF 417 Twin Code PDF417 twin code is 2 PDF417 barcodes paralleled vertically or horizontally. Two of them must have the same direction and similar specifications and be placed closely together. There are 3 options for reading PDF417 twin codes: Single PDF417 Only: Read either PDF417 code.

  • Page 243: Qr Code

    Enter Setup QR Code Restore Factory Defaults Restore the Factory Defaults of QR Code Enable/Disable QR Code ** Enable QR Code Disable QR Code Set Length Range for QR Code Set the Minimum Length Set the Maximum Length Micro QR ** Enable Micro QR Disable Micro QR * Exit Setup...

  • Page 244: Qr Twin Code

    Enter Setup QR Twin Code QR twin code is 2 QR barcodes paralleled vertically or horizontally. Two of them must have the same direction and similar specifications and be placed closely together. There are 3 options for reading QR twin codes: Single QR Only: Read either QR code.
  • Page 245 Enter Setup Transmission order of twin code Order 1: Transmit the one containing more information first. Order 2: Transmit the one containing less information first. Order 3: If the twin code is paralleled horizontally, transmite the one on the left first; if it is paralleled vertically, transmit the one in the upper position first.

  • Page 246: Data Matrix

    Enter Setup Data Matrix Restore Factory Defaults Restore the Factory Defaults of Data Matrix Enable/Disable Data Matrix ** Enable Data Matrix Disable Data Matrix Set Length Range for Data Matrix Set the Minimum Length Set the Maximum Length * Exit Setup...

  • Page 247: Rectangular Barcode

    Enter Setup Rectangular Barcode ** Enable Rectangular Barcode Disable Rectangular Barcode Mirror Image ** Decode Mirror Images Do Not Decode Mirror Images * Exit Setup...

  • Page 248: Data Matrix Twin Code

    Enter Setup Data Matrix Twin Code Data Matrix twin code is 2 Data Matrix barcodes paralleled vertically or horizontally. Two of them must have the same direction and similar specifications and be placed closely together. There are 3 options for reading Data Matrix twin codes: Single Data Matrix Only: Read either Data Matrix code.

  • Page 249: Chapter 9 Image Control

    Enter Setup Chapter 9 Image Control Ambient Illumination Ambient lighting conditions may vary from one operating environment to another, such as fluorescent lit warehouses or sunlit open spaces. Fluorescent lights may flicker when using AC power source in 50-60Hz. Usually indoor illuminance is around 1,000 lux while outdoor illuminance may reach 60,000 lux or even over 100,000 lux.

  • Page 250: Image Flipping

    Enter Setup Image Flipping The user may get reversed images when the scanner is installed in non-standard ways. When it happens, image flipping can be used to right the “wrong”. The following figures illustrate standard image and three flipped images. ...

  • Page 251: Flip

    Enter Setup Flip ** Do Not Flip Flip Vertically Flip Horizontally Flip Horizontally and Vertically Flip Vertically Flip Vertically Do Not Flip Vertically Flip Horizontally Flip Horizontally Do Not Flip Horizontally * Exit Setup...

  • Page 252: Chapter 10 Troubleshooting

    Chapter 10 Troubleshooting Problem: Barcodes cannot be read. Solution: 1. Find out the barcode type and verify that the barcode type is enabled. If the barcode parameters include check digit verification, select the Disable option. 2. If you do not know the barcode type, enable all symbologies. 3.
  • Page 253 Problem: Illumination and aiming beams are OFF. Solution: 1. Verify that the scanner is properly powered up. 2. Send “?” to the scanner. If the scanner returns a reply of “!”, then send programming commands to turn on illumination and aimer. Problem: Carriage Return/Line Feed settings.

  • Page 254: Appendix

    Appendix Appendix 1: Factory Defaults Table Parameter Factory Default Remark Programming Barcode Disabled Barcode Programming Do not send Programming Barcode Data Communication Settings Power-Saving Mode Normal Mode: RS-232 & USB Enabled (Only RS-232 supported) supported 9600 Baud Rate None Parity Check RS-232 Data Bit Stop Bit...
  • Page 255 Parameter Factory Default Remark Applicable to Trigger mode, Sense Decode Session Timeout 3,000ms mode, Continuous mode. Continuous Mode 0~3,600,000ms Timeout between Decodes 1000ms 0~65,535ms Cellphone Read Mode Disabled Scanning Preferences Decode Area Whole Area Decoding Central Area Illumination & Aiming Illumination Normal Aiming...
  • Page 256 Parameter Factory Default Remark Symbologies Video Reverse Disabled Applicable to all symbologies. Code 128 Code 128 Enabled Maximum Length Minimum Length （ ） GS1-128 UCC/EAN-128 GS1-128 Enabled Maximum Length Minimum Length AIM-128 AIM-128 Enabled Maximum Length Minimum Length EAN-8 EAN-8 Enabled Check Digit Transmit...
  • Page 257 Parameter Factory Default Remark ISBN ISBN Enabled ISBN Format ISBN-13 2-Digit Add-On Code Disabled 5-Digit Add-On Code Disabled Add-On Code Not required UPC-E UPC-E Enabled Check Digit Transmit 2-Digit Add-On Code Disabled 5-Digit Add-On Code Disabled Add-On Code Not required Extend to UPC-A Disabled System Character “0”...
  • Page 258 Parameter Factory Default Remark ITF-14 ITF-14 Enabled Check Digit Do not transmit 出 Matrix 2 of 5 Matrix 2 of 5 Disabled Check Digit Verification Enabled Check Digit Do not transmit Maximum Length Minimum Length Industrial 2 of 5 Industrial 2 of 5 Enabled Check Digit Verification Disabled...
  • Page 259 Parameter Factory Default Remark Codabar Codabar Enabled Check Digit Verification Disabled Check Digit Do not transmit Start/Stop Character Transmit Start/Stop Character Format ABCD/ABCD Maximum Length Minimum Length Code 93 Code 93 Enabled Check Digit Verification Enabled Check Digit Do not transmit Maximum Length Minimum Length GS1 Databar...
  • Page 260 Parameter Factory Default Remark MSI-Plessey MSI-Plessey Enabled Check Digit Verification One check digit, MOD10 Check Digit Do not transmit Maximum Length Minimum Length PDF 417 PDF 417 Enabled Maximum Length 2710 Minimum Length PDF 417 Twin Code Read single PDF417 only Transmission Order of Twin Code Order 1 QR Code...

  • Page 261: Appendix 2: Aim Id Table

    Appendix 2: AIM ID Table Symbology AIM ID Remark Standard EAN-13 EAN-13 EAN-13 + 2/5-Digit Add-On Code Standard EAN-8 ]E4…]E1… EAN-8 EAN-8 + 2-Digit Add-On Code ]E4…]E2… EAN-8 + 5-Digit Add-On Code Standard UPC-E UPC-E UPC-E + 2/5-Digit Add-On Code Standard UPC-A UPC-A UPC-A + 2/5-Digit Add-On Code...
  • Page 262 Symbology AIM ID Remark Code 93 Standard Code 93 One check digit MOD11; transmit check digit Two check digits, MOD11/MOD11; transmit check digit Code 11 Do not transmit check digit after verification No c heck digit verification GS1-DataBar (RSS) Standard GS1-DataBar Plessey Standard Plessey One check digit, MOD10;...

  • Page 263: Appendix 3: Code Id Table

    Appendix 3: Code ID Table Symbology Code ID Code 128 GS1-128(UCC/EAN-128) AIM-128 EAN-8 EAN-13 ISSN ISBN UPC-E UPC-A Interleaved 2 of 5 ITF-6 ITF-14 Matrix 2 of 5 Industrial 2 of 5 Standard 2 of 5 Code 39 Codabar Code 93 Code 11 Plessey MSI-Plessey...

  • Page 264: Appendix 4: Ascii Table

    Appendix 4: ASCII Table Char (Null char.) (Start of Header) (Start of Text) (End of Text) (End of Transmission) (Enquiry) (Acknowledgment) (Bell) (Backspace) (Horizontal Tab) (Line Feed) (Vertical Tab) (Form Feed) (Carriage Return) (Shift Out) (Shift In) (Data Link Escape) (XON) (Device Control 1) (Device Control 2) (XOFF) (Device Control 3)
  • Page 265 Char (Request to Send) (Unit Separator) (Space) (Exclamation Mark) " (Double Quote) (Number Sign) (Dollar Sign) (Percent) & (Ampersand) (Single Quote) (Right / Closing Parenthesis) (Right / Closing Parenthesis) (Asterisk) (Plus) (Comma) (Minus / Dash) (Dot) (Forward Slash) (Colon) (Semi-colon) <...
  • Page 266 Char > (Greater Than) (Question Mark) (AT Symbol) (Left / Opening Bracket) (Back Slash) (Right / Closing Bracket)
  • Page 267 Char (Caret / Circumflex) (Underscore) (Grave Accent) (Left/ Opening Brace) (Vertical Bar) (Right/Closing Brace) (Tilde) (Delete)

  • Page 268: Appendix 5: Parameter Programming Examples

    Appendix 5: Parameter Programming Examples The following examples show you how to program parameters by scanning programming barcodes. a. Program the Decode Session Timeout Example: Set the decode session timeout to 1500ms Scan the Enter Setup barcode. Scan the Decode Session Timeout barcode. (See the “Decode Session Timeout” section in Chapter 3) Scan the numeric barcodes “1”, “5”, “0”...

  • Page 269: Program The Timeout Between Decodes (Same Barcode)

    d. Program the Timeout between Decodes (Same Barcode) Example: Set the timeout between decodes (same barcode) to 1000ms Scan the Enter Setup barcode. Scan the Timeout between Decodes (Same Barcode) barcode. (See the “Timeout between Decodes (Same Barcode)” section in Chapter 3) Scan the numeric barcodes “1”, “0”, “0”...

  • Page 270: Program The Central Area

    g. Program the Central Area Example: Set the percentage of central area to 20% Scan the Enter Setup barcode. Scan the Specify Central Area barcode. Scan the numeric barcodes “2” and “0”. Scan the Save barcode. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.) h.

  • Page 271: Program The Code Id

    j. Program the Code ID Example: Set the Code ID of PDF 417 to “p” Check the hex value of “p” in the ASCII Table. (“p”: 70) Scan the Enter Setup barcode. Scan the Modify PDF417 Code ID barcode. (See the “Modify Code ID” section in Chapter 6) Scan the numeric barcodes “7”...

  • Page 272: Program The Length Range (Maximum/Minimum Lengths) For A Symbology

    l. Program the Length Range (Maximum/Minimum Lengths) for a Symbology Note: If minimum length is set to be greater than maximum length, the scanner only decodes barcodes with either the minimum or maximum length. If you only want to read barcodes with a specific length, set both minimum and maximum lengths to be that desired length.

  • Page 273: Appendix 6: Digit Barcodes

    Appendix 6: Digit Barcodes...

  • Page 275: Appendix 7: Save/Cancel Barcodes

    Appendix 7: Save/Cancel Barcodes After reading numeric barcode(s), you need to scan the Save barcode to save the data. If you scan the wrong digit(s), you can either scan the Cancel barcode and then start the configuration all over again, or scan the Delete the Last Digit barcode and then the correct digit, or scan the Delete All Digits barcode and then the digits you want.
  • Page 276 AdvanCode Technology Co., Ltd. 6F-5, No.81, Sec. 1, Xintai 5th Rd., Xishi Dist., New Taipei City, 221, Taiwan TEL : 886-2-7708-1569 FAX : 886-2-8698-4093 E-mail: info_adv@advancode.us www.advancode.com.tw...

This manual is also suitable for:

Qc510xQc511xQc620xQc621xQc630xQc631x ... Show all

Table of Contents