Page 3
Anywhere Want. SAFETY INFORMATION • Do not try and lift the RTT on your own; make sure to have at least 2 people, using proper lifting techniques. • Ensure that the RTT is installed correctly and that all connections, straps and surfaces are checked regularly for degradation and loosening.
Page 4
Roof Top Tent Installation Manual Components Included in the kit: Roof Top Tent Telescopic Ladder 8x Flat Brackets 8x Bolts & Nuts 2x Spanner Installation Instructions At least 2-3 people are needed to install the RTT. Do not try and lift and install our tent on your own.
Page 5
Roof Top Tent Installation Manual Lift the RTT onto your vehicle’s roof rack. Position so that the weight is centered evenly over the roof. Assemble 4 of the flat brackets with 2 bolts each.
Page 6
Roof Top Tent Installation Manual With the flat brackets assembled, lift the side of the RTT and slide 2 flat brackets with bolts along each mounting rail. Slide the flat brackets with bolts along the mounting rails. Connect the 4 remaining flat brackets with 2 nuts each.
Page 7
Roof Top Tent Installation Manual The RTT should have 4 spaced, strong points of contact on the roof rack. Take the vehicle for a low speed, short drive. Afterwards, check all the bolts are secure. Tighten if required.
Need help?
Do you have a question about the Roof Top Tent and is the answer not in the manual?
Questions and answers