Advertisement
Product Name:
SKU #:
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
Parts included: Bollard Light, Bollard Light Stakes, Solar Panel, Pole, Stake
Instructions:
Select a flat surface for your solar bollard light.
•
Secure the bollard light to the ground with the two ground stakes provided.
•
•
Assemble the solar light panel to the pole and ground stake.
•
To turn on, press the On/Off push button.
•
For best results, allow to charge in direct sunlight for a minimum of 8 hours.
•
After fully charged, product will automatically light at night when the solar panel is set to "On".
•
To extend battery life, turn to the off position when not in use for long periods of time.
•
Battery:
1pc 18650 LI-ION 3.7V 1200MAH (included)
Cement Mushroom-Top LED Solar Bollard Light
WHSL982 (12.5in. H), WHSL983 (17.5in. H), WHSL984 (21in. H)
Instruction Manual
Please save this manual for future reference.
Advertisement
Table of Contents
Summary of Contents for LuxenHome WHSL982
- Page 1 Product Name: Cement Mushroom-Top LED Solar Bollard Light SKU #: WHSL982 (12.5in. H), WHSL983 (17.5in. H), WHSL984 (21in. H) Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest standards of safety and quality.
- Page 2 Product Name: Cement Mushroom-Top LED Solar Bollard Light SKU #: WHSL982 (12.5in. H), WHSL983 (17.5in. H), WHSL984 (21in. H) Trouble Shooting Tips: If your solar light does not turn on at night, it may be caused by the following: 1. Check to see if the solar panel On/Off is in the “OFF” position.
Need help?
Do you have a question about the WHSL982 and is the answer not in the manual?
Questions and answers