Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for LanternLITE Honeycomb
- Page 1 The DIY Lantern Blind Wiring Diagrams & Programming Instructions...
- Page 3 Mains powered Honeycomb blind • Your mains powered Honeycomb blind is powered by a Somfy® Tilt 25 motor which is housed in the head of the blind • A 3m cable is attached to the motor • There is a power adapter (transformer) attached to the 3m cable •...
- Page 4 RTS controls explained Remote Control ',:-�, � Prog button .� '-,~- - � Prog button • ® Up button Up button /� Stop button Down button Down button • • • Channel selection indicator LEDs Channel selection Woll Switch...
- Page 5 Somfy RTS motor setup - 230v and 24v Only the blind you want program can be connected to the power whilst programming. Disconnect all other blinds from the power to avoid interference. A. Supply power to the motor you want to programme, the motor is now in learning mode Pair the remote with the motor The blind jogs...
- Page 6 Somfy RTS motor setup - 230v and 24v A. Turn off the power for at least 2no. seconds A. - B. Turn on the power for lOno. seconds B . - Reset the motor C. Turn off the power for at least 2no. seconds C.
Need help?
Do you have a question about the Honeycomb and is the answer not in the manual?
Questions and answers