Advertisement
Instructions
Mechanism
1.
3.
4.
1- Seat height adjustment
To lower the seat, stay seated and pull the lever up until the desired seat height is reached. To raise the seat, pull the
lever while lifting your weight off the seat.
2- Backrest height adjustment (not shown)
To adjust the height of the backrest, simultaneously open the two handles located on each side of the backrest frame.
Raise or lower the backrest to the desired position, then close the two handles.
3- Tilt lock
To release the tilt, push the lever inward and push the backrest using your back. To lock the tilting into one of the 4
positions, move the backrest using your back and push the lever inward again.
4- Seat depth adjustment
Pull the lever, slide the seat forward or backward until the adequate position is reached and then release the lever.
Advertisement
