Aiyima T8 User Manuals

Aiyima T8 User Manuals

Bluetooth 5.0 tube 6n3 headphone preamplifier

Advertisement

Shenzhen Yima Technology Co.,Ltd
Website:www.aiyima.com
Telephone: 86-0755-28268551
Location: 4F, Building 7 Hekan industrial park. Wuhe south road 41. Long-Gang district.
ShenZhen. CHINA. 518000
① All my wires are connected. Why is there no sound?
1. Check whether the machine is turned on and whether it has switched to the
correspondinginput channel.
2.Check whether the back-end connection is correct and whether the volume is in
the minimum state.3. If all the above are normal, check whether the input playback
device is silent,paused,or the volume is at its minimum.
② Why can't I search for bluetooth pairing names?
Due to the design of this machine,bluetooth does not work when using other channels
for input.You just need to switch the input to Bluetooth mode.
③ Why does the sound break?
Although this product is the front stage of DAC, it also has the function of amplification.
lf the volume of the rear stage device is turned up to the maximum, the volume of the
front stageis also turned up to the maximum, which is easy to distort. At this time,
you just need to turndown the volume of the front stage or the rear stage.
④ Why is there a lot of electrical noise from the horn?
If you are not using the original standard power supply,please replace the power
supply andtest again.Many power supply ripple interference factor is large will cause
a lot of current sound.
⑤ Why does the speaker make a loud buzzing sound when I plug in the input cord
and don't playthe audio source?
when the signal line without shield is used,the interference signal will enter the
poweramplifier for amplification. Replacing the signal line with shield can effectively
solve theinterference sound,or unplug the signal line.
1. Do not open the shell without permission. Improper operation may damage the
machine or cause electric shock .
2. please use the regular manufacturer of switching power supply, other wise there w
ill be the risk of damage to the machine.
Email: sale@aiyima.com
3. Please do not change the vacuum tube at will, or it will burn out your vacuum tube
VK: https://vk.com/aiyima
or machine.
4. Do not put the machine in a high temperature or humid environment.
Q & A

Warning !

4
Bluetooth 5.0 TUBE 6N3
Headphone Preamplifier
USER MANUALS
Model: T8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T8 and is the answer not in the manual?

Questions and answers

Michael
March 25, 2025

What is the input impedance of the t8. I want to connect a solid state preamp to the t8 using rca cables and need to know if the impedance of the preamp is compatible with the t8. Thanks

1 comments:
Mr. Anderson
May 14, 2025

The input impedance of the Aiyima T8 is not specified in the provided information.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for Aiyima T8

  • Page 1 Replacing the signal line with shield can effectively solve theinterference sound,or unplug the signal line. Warning ! Model: T8 1. Do not open the shell without permission. Improper operation may damage the machine or cause electric shock .
  • Page 2 PC-USB 0peration instructions Panel introduction Parameter CM6642+ES9018+OPA1656+NJW1194 Chip ① Connect the PC-USB interface to the computer with the USB cable configured by +QCC3031+6N3+MAX9722 factor y (USB supports hot plugging). ② Press the encoder knob to switch to PC-USB input. PC-USB supports sampling rate 192K/24Bit ③...

Table of Contents