Advertisement
Replacement Cartridge Instructions
Before replacing the filters, disconnect the machine from the water supply.
1. Remove the entire filter system from your shower pipe by turning the chrome swivel
collar, as shown in Figure A. Then remove the shower head by turning the connector.
ATTENTION: Do not remove the filter cartridge while the filter is still attached to the
shower pipe, this may cause damage to the filter where it connects to the shower pipe.
2. While holding the upper filter housing firmly, remove the lower filter housing by
turning, as shown in Figure B.
Rain Shower Filtration Model: SF-5
1
Advertisement
Table of Contents
Summary of Contents for Fabri-Technic SF-5
- Page 1 Rain Shower Filtration Model: SF-5 Replacement Cartridge Instructions Before replacing the filters, disconnect the machine from the water supply. 1. Remove the entire filter system from your shower pipe by turning the chrome swivel collar, as shown in Figure A. Then remove the shower head by turning the connector.
- Page 2 3. Take out the filter cartridge from the upper filter housing. This cartridge may be disposed of with your trash, as it poses no environmental hazards. 4. Unwrap the new replacement cartridge. Insert the new cartridge into the upper filter housing. 5.
Need help?
Do you have a question about the SF-5 and is the answer not in the manual?
Questions and answers