User Manual Safety Precautions To prevent personal injury or damage to vehicles and/or the OBDII BLE, please read this user’s manual first: Always perform automotive testing in a safe environment. Do not attempt to operate or observe the tool while driving a vehicle.
User Manual 2. General Information 2.1 On-Board Diagnostics (OBD) II The OBD II system is designed to monitor emission control systems and key engine components by performing either continuous or periodic tests of specific components and vehicle conditions. When a problem is detected, the OBD II system turns on a warning lamp (MIL) on the vehicle instrument panel to alert the driver by the phrase of “Check Engine”...
Page 5
User Manual How to connect OBD Fusion to ECU 1. Turn on Bluetooth on Cell phone or Tablets, but DON’T pair device here 2. Click settings 3. Click preferences 4. Click communications...
Page 6
User Manual 5. Communication Type please choose Bluetooth LE 6. Click Connect button at bottom...
Page 7
User Manual How to connect Auto Doctor to ECU Turn on Bluetooth on Cell phone or Tablets, but DON’T pair bluetooth device yet 2. Click Extras/Connectivity...
Page 8
User Manual 3. Choose Bluetooth 4. Click Device and Choose Viecar BLE 5, Click the chain mark on top right corner viii...
Page 9
User Manual How to connect Torque to ECU 1. Turn on Bluetooth on your Cell phone or Tablets and pair with OBDII 2. Open Setting page 3. OBD2 Adapter Settings...
Page 10
User Manual 4. Connection Type / Choose Bluetooth 5. Bluetooth settings / Choose Bluetooth Device OBDII CAUTION: Don’t connect or disconnect any test equipment with ignition on or engine running.
Page 11
Device list, then it will connect. Q: I followed the instructions, but cannot connect to ECU A: Please 1. Unplug the OBDII BLE device 2. Quit app 3. Remove the OBDII from the Bluetooth list on phone settings page (Android devices only) 4. Disable bluetooth of the phone, 5.
Need help?
Do you have a question about the OBDII BLE and is the answer not in the manual?
Questions and answers