Advertisement
Quick Links
SmartCam User Manual DVR02/DVR023
CAUTIONS:
1. Please format the SD card after installing into the mirror, otherwise a
possible video error may occur when playing back a video.
2. In the Wi-Fi interface, when your mobile phone is connected to the
mirror by Wi-Fi, the video will display on your mobile phone only and will
not display on the mirror. If Wi-Fi is disconnected, video will display back
on the mirror automatically.
3. For the best performance and durability of video recording, we
recommend using class C10 TF card or better.
Advertisement
Summary of Contents for iCheck 4x4 Accessories SmartCam DVR02
- Page 1 SmartCam User Manual DVR02/DVR023 CAUTIONS: 1. Please format the SD card after installing into the mirror, otherwise a possible video error may occur when playing back a video. 2. In the Wi-Fi interface, when your mobile phone is connected to the mirror by Wi-Fi, the video will display on your mobile phone only and will not display on the mirror.
-
Page 2: Parking Monitor
2. Rear view mirror 1. Rear camera (optional) 5. Install Kit 4. Power cable 3. User manual for bracket Front recording 1080P Back up camera display (optional) Rear recording 720P (optional) LCD power save In-cabin IR camera 720P ... - Page 3 1. Menu and back 2. Video switch 3. Screen on/off 4. Microphone switch 5. Lock video 6. Light sensor 7. Power button: short press to turn on/off screen; long press to turn on/off the device 8. Indicator 9. In-cabin IR camera 10.
- Page 4 Car factory original mirror Windscreen block force the mirror off the bracket. iCheck 4x4 Accessories will not be responsible for damage caused to your car by wrong installation of the mirror. Install mirror monitor on the plate...
- Page 5 Red to ignition +12V Yellow to battery Black to GND FRONT & REAR CAMERA VERSION Rear camera (optional) FRONT + REAR + IN-CABIN IR CAMERA VERSION Red to ignition +12V To reversing light Yellow to battery (if using as a reversing camera) Black to GND Your new SmartCam mirror utilises ‘touch frame’...
- Page 6 Tap the icon “ ” in the main interface to proceed to the menu settings. File playback: “Normal file”, “Event file” and “Picture file” are optional. After entering the playback page, press “ ” button to switch to view the front/ middle/ rear channel video. Wi-Fi: Can set “on/off”.
- Page 7 Time Lapse: Can set “on/off”. Turn on the “time lapse” video function. When the car is turned off and the mirror is in the ACC disconnected state, the mirror will prompt to enter the “time lapse” video. When the voltage reaches 11.8 the mirror will stop recording automatically to avoid a low voltage situation.
- Page 8 Built-in Wi-Fi module, this system can connect to your mobile phone through Android or IOS APP. 1. Scan the QR code below to quickly install your mobile app. Android 2. In the main interface of the dash camera, short press “ ”...
- Page 9 4. Open mobile phone APP, you can now check the recorded video. anoperataccordingly. Click “ ” to enter the list of recorded videos, click “Edit” to switch between front and back video, download the video to phone, delete videos in batches, etc. See the figure below.
- Page 10 To replay any videos via the program showing on Google maps please download the program from www.icheck4x4accessories Once installed on your computer remove the SD card from the mirror and insert into computer. Open the DataKam program and it will automatically bring up stored video files to replay your route travelled, speed and locations etc.