Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Nobilium Manuals
  4. Disc Duplicator
  5. Ticonium Colloid-Saver 3.5
  6. Owner's manual

Nobilium Ticonium Colloid-Saver 3.5 Owner's Manual

Fully automatic & computer controlled
Hide thumbs

Advertisement

Quick Links

Download this manual
Colloid-Saver
Special Features
• Intelli-Heat™ computer-controlled
heating system prevents over-heating
and eliminates chunks of colloid
• Altitude setting for precision
temperature control
• SmartCycle™ stirring cycle activated
only when needed, minimizing colloid
breakdown
• High volume, no-drip, no-clog
dispensing nozzle
• Pre-set programs for virtually any
colloid
• Fully programmable
• Flexible capacity: Use 1 to 3.5 gallons
• USB port for future software upgrades
• Lighted work area with laser
sight-line
• Extra large easy-to-fill tank
• Corrosion-proof front panel
• Air-Cooled, no water or drain required
• Optional extension for continuous
dispensing
Specifications
Description: Colloid-Saver 3.5 duplicator
Part #: 40811
Capacity: 3.5 Gallons (13.2 Liters)
Electrical: 115 Volt, 60 Hz, 12 Amps
Height: 26" (66 cm)
Width: 17 1/2" (44.5 cm)
Depth: 18 3/4" (47.6 cm)
Weight: 90 Lbs (40.8 Kg)
Shipping Weight: 96 Lbs (43.5 Kg)
3 5
™
Helps to extend colloid life!
Fully Automatic
& Computer Controlled
Designed & Manufactured
in our Albany, NY Factory
Owner's Manual
Duplicator
Special Features
NOBILIUM
TM
TM

Advertisement

loading

Summary of Contents for Nobilium Ticonium Colloid-Saver 3.5

  • Page 1 Designed & Manufactured Capacity: 3.5 Gallons (13.2 Liters) in our Albany, NY Factory Electrical: 115 Volt, 60 Hz, 12 Amps Height: 26” (66 cm) NOBILIUM Width: 17 1/2” (44.5 cm) Depth: 18 3/4” (47.6 cm) Weight: 90 Lbs (40.8 Kg) Owner’s Manual...
  • Page 2 Congratulations! You have just purchased a quality piece of CMP Dental Laboratory Equipment. It’s quality has been carefully controlled and thoroughly tested for optimum performance and durability. If you have any questions regarding CMP’s quality line of dental laboratory equipment and supplies, please call toll-free: 800-833-2343 or 518-434-3147 (Fax: 518-434-1288) between the hours of 8:00 AM and 4:30 PM Eastern Time.

  • Page 3: Receiving And Unpacking

    It is important to thoroughly review this connections to avoid accidental shock. manual and test your new duplicator prior It is important to carefully read and follow to loading with duplicating material. the instructions in the next section prior to actually plugging-in the duplicator. I.

  • Page 4: Operation

    8. The Colloid-Saver 3.5 duplicator has been SET POINT. pre-programmed for use with Nobilium, Ticonium or Niranium colloids at sea level. 5. All three heating lights will illuminate. If the duplicator will not be used at sea level,...
  • Page 5 Colloid Storage 3. Remove back panel and inspect the bearing. If any colloid is leaking from this Please follow these procedures when storing area, the bearing must be replaced. used material that will be re-melted. 1. After removing the colloid from the 4.
  • Page 6 To reset the duplicator to factory defaults, Select Pre-Programmed Setting scroll through the menu options until the If not using Nobilium, Ticonium or Niranium display reads “SET DEF.” Press the SET colloid products, review the requirements button to return all settings to factory default of the duplicating material to be used and settings and “DONE”...

  • Page 7: Troubleshooting

    If manufacturer- recommended VII. Troubleshooting specifications for the colloid to be used are unavailable, follow these steps: 1. Colloid-Saver 3.5 duplicator will not turn on. 1. Cook-Down Temperature – Select a A. Check wall outlet for power. profile and edit the cook-down temperature B.
  • Page 8 Underside of Top Cover Front View with Top Cover ITEM & DESCRIPTION PART NUMBER Front Panel Control 40811P37 Precision Laser 40811P48 LED Light 40811P38 Power Entry Module 40811P20 Cover Lock 40811P44 Poly Cover 40811P1 Cover Interlock 40811P45 Cover Handle 40811P43 Power Cord Assembly 40811P61 Mold Form Front Panel...
  • Page 9 Side View & Valve ITEM & DESCRIPTION PART NUMBER USB Port Connector 40811P39 1 Amp Motor Circuit Breaker 65383P7 15 Amp Main Breaker 65383P6 Power Entry Module 40811P20 Rubber Feet 40811P19 Knob 40811P2 Valve Body 40811P7 Locking Nut 40811P11...
  • Page 10 Inside View (Side) ITEM & DESCRIPTION PART NUMBER 36081R Fan Guard 40811P22 Fan Air Filter 40811P22A Side Heater 40811P33 Controller 40811P34 Drawer Slide 40811P12 Solid State Relay 41984P18 Handle 40811P26 2-Pin Connector 40811P51 8-Pin Connector (X2) 40811P50 14-Pin Terminal Block 40811P52 Flat Cable 40811P53...
  • Page 11 Inside View (Back) ITEM & DESCRIPTION PART NUMBER Coupling Hub 5/8 40811P23 Coupling Hub 3/4 40811P24 Coupling Spider 40811P25 Keyed Drive Shaft 40811P30 Shaft Collar 40811P35 Motor 40811P31 Gearhead 40811P31A Power Supply 40811P40 Thermistors 120C 40811P28 Tank Assembly 40811G3 Bottom Heater 4081132 Cover Interlock Bracket 40811P46...
  • Page 12 Inside View of Tank Inside Tank & Stirrer ITEM & DESCRIPTION PART NUMBER Thermocouple K-Type 10980 Main Shaft 40811P13 Bearing 40811P29 Seal 40811P41 Stirrer Assembly 40811G2 Stirrer Knob 40811P18...
  • Page 13 Accessories ITEM & DESCRIPTION PART NUMBER Dispensing Extender 40811P58...
  • Page 14 NOBILIUM 413 North Pearl Street • Albany, New York • 12207 • Toll-Free: 800 833-2343 • USA: 518 434-3147 • Fax: 518 434-1288 USA Email: info@cmpindustries.com • Export Email: export@cmpindustries.com Website: www.cmpindustries.com Form 40811...