Advertisement
User Manual for Omago Intelligent Diaper Sensor(SG-101/SD-101)
Thank you for purchasing Omago Intelligent Diaper Sensor. Please read this User
Manual detail before starting to use Omago Intelligent Diaper Sensor and following the
instruction.
Package contents
1) Omago Intelligent Diaper Sensor
2) Strap
3) User Manual
Omago Intelligent Diaper Sensor
Strap
Product introduction
Getting Started
Please charge Omago Intelligent Diaper sensor battery fully before starting to use.
Installation
1. Put Intelligent Diaper Sensor (SG-101) on flat surface for sleep posture calibration and
press sensor button for 3~5 seconds for connection to Gateway. If connection
successfully. If not, please repeat above process. Please be noted, must put the
sensor on a flat surface for calibration accuracy. If not calibrating accurately, it may
affect sleep posture accuracy. The sleep posture detection function is for assisting
to parents and for information only. Parents still has to look after the baby all the
time.
User manual
Advertisement
Table of Contents
Summary of Contents for Microtips Technology Omago SG-101
- Page 1 User Manual for Omago Intelligent Diaper Sensor(SG-101/SD-101) Thank you for purchasing Omago Intelligent Diaper Sensor. Please read this User Manual detail before starting to use Omago Intelligent Diaper Sensor and following the instruction. Package contents 1) Omago Intelligent Diaper Sensor 2) Strap 3) User Manual Omago Intelligent Diaper Sensor...
- Page 2 2. Pressing the Dock link button, the button led will flash blue. Take one Intelligent Diaper Sensor (SD-101)and press the connection button for 3-5 seconds for pairing. The Dock link button led will become constant blue if pairing successfully. If not, please repeat the link process.
Need help?
Do you have a question about the Omago SG-101 and is the answer not in the manual?
Questions and answers