Advertisement
Table of Contents
1
Align the device keyboard under the
bottom case's front clips on both sides.
4
Align the device screen under the top
case's side clips on both sides.
GumdropCases.com
2
Pop on the side clips.
5
Slide the top case down, to secure the screen
behind the side clips, until the device reaches
the case's top edge.
INSTALLATION
3
Carefully press the rear corner clips to snap
onto the keyboard.
6
Press the lower side clips over the device,
with pressure from both sides, to snap
into place securely.
Congratulations on your new case!
Advertisement
Table of Contents
Related Manuals for Gumdrop SLIMTECH
Summary of Contents for Gumdrop SLIMTECH
- Page 1 INSTALLATION Align the device keyboard under the Pop on the side clips. Carefully press the rear corner clips to snap bottom case’s front clips on both sides. onto the keyboard. Align the device screen under the top Slide the top case down, to secure the screen Press the lower side clips over the device, case’s side clips on both sides.
- Page 2 REMOVAL CRITICAL! Push the lower left and right side clips Start sliding the top case off by pushing up FOLLOW STEPS 1 AND 2 IN ORDER outward to release the bottom of the top with your fingers on the bottom corners. case from the device.
Need help?
Do you have a question about the SLIMTECH and is the answer not in the manual?
Questions and answers