Download Print this page
GQF HOVA-BATOR 2370 Manual

GQF HOVA-BATOR 2370 Manual

Electronic thermostat circulated air

Advertisement

Quick Links

HOVA BATOR
PARTS
Unpack the incubator from box. Check
for the components listed below.
Top
with heat element, fan,
& thermostat, installed.
Hova-Bator Bottom
SETUP
Plastic Liner
trough as it will eff ect humidity. Humidity should be between 45 and 55% for SETTING
and 55 to 65% for HATCHING. Setting the humidity above 65% is not recommended
as it may cause condensation to form on the windows and can decrease hatch
percentage.
Plug the cord set into the appropriate wall socket. The fan should then run and the
small heat indicator light on the thermostat box should be lit. Allow the incubator
to warm up for one hour. When the light begins blinking regularly, the incubator
Incubator Floor
is nearing its set point.
ELECTRONIC THERMOSTAT
CIRCULATED AIR
Notch
MODEL 2370
Unpack the incubator from the
box. Remove the top half from
the bottom.
Lay the Plastic Liner
in Hova-Bator Bottom then place
the Incubator Floor on top of the
Liner. Arrange the plastic fl oor as
shown using the water troughs and
turner power cord notch as reference.
In most climates, fill trough #1
(highlighted in yellow) with water.
Surface area, not depth, determines
humidity; refi ll trough as necessary
to prevent it from drying out.
NOTICE: Humidity troughs should be
fi lled with cool tap water. Careful to
avoid spilling excess water outside of

Advertisement

loading
Need help?

Need help?

Do you have a question about the HOVA-BATOR 2370 and is the answer not in the manual?

Questions and answers

Rmacdiarmid
April 5, 2025

does the model 2370 measure humidity

1 comments:
Mr. Anderson
April 5, 2025

The GQF HOVA-BATOR 2370 does not appear to measure humidity directly. While it has humidity guidelines and troughs for controlling humidity, the digital display's accuracy is questioned, and using an additional analog thermometer is recommended. There is no mention of a built-in hygrometer, so external humidity measurement tools may be needed.

This answer is automatically generated

Sue Fields
March 9, 2025

I set 3 Emu eggs in my Hova-Bator 2370 w/o any water a few days ago. Emus require 25-35% humidity but mine is running at 40%. I have added a bowl of rice and dry sponge but it won’t reduce, using an InkBird hygrometer so I believe it is accurate. I’m in San Diego and house humidity is only 35%, how can I reduce the humidity?

1 comments:
Mr. Anderson
March 9, 2025

To reduce humidity in your GQF Hova-Bator 2370 incubator for Emu eggs, you can try the following methods:

1. Reduce Water in Troughs – Ensure that only the necessary water troughs are filled and avoid overfilling.
2. Prop Up the Top Slightly – If humidity remains high, slightly prop up the top to allow excess moisture to escape while maintaining the proper temperature.
3. Wipe Moisture from Windows – If condensation forms on the windows, quickly remove the top and wipe away the moisture to aid drying.

Ensure that humidity stays within the recommended range for incubation.

This answer is automatically generated

Summary of Contents for GQF HOVA-BATOR 2370

  • Page 1 HOVA BATOR ELECTRONIC THERMOSTAT CIRCULATED AIR MODEL 2370 PARTS SETUP Unpack the incubator from box. Check for the components listed below. Notch Unpack the incubator from the box. Remove the top half from the bottom. Lay the Plastic Liner in Hova-Bator Bottom then place the Incubator Floor on top of the Liner.
  • Page 2 LOCATION An Incubator is designed to bring normal room temperature to the desired temperature. Room temperture of 60°F. or below will reduce the temperature in the incubator. Room temperature change of 10°F. or more will change temperature in incubator & is more pronounced below a temperature of 70°F. The location of the machine is important to successful operation.
  • Page 3 AUTOMATIC TURNER Set up incubator as shown on page 1. If you are using the automatic egg turner, place it on the fl oor in the bottom of the incubator. The turner motor uses metal gears for additional strength when turning heavy loads. These gears can emit noise during normal operation.
  • Page 4 LIMITED WARRANTy GQF Manufacturing Co., Inc. guarantees against defect for a period of 1 year from date of purchase. This warrantee is void for product more than 3 years old when not sold direct from GQF to the consumer. Notify GQF Mfg. Co. of any defective items, giving catalogue number and name of item and what is wrong with item. Send copy of invoice showing date of purchase.