Advertisement
Quick Links
Operating Instructions – Hob Baumatic BTC2.2
Control Panel
1. On/Off button
2. Safety lock button
3. Safety lock neon
4. Minus button
5. Plus button
6. Cooking zone indicator
7. Decimal point symbol
8. Double hyperspeed zone dual circuit On/Off button
9. Timer minus button
10. Timer plus button
11. Timer display
12. Timer neon
13. Double hyperspeed zone dual circuit indicator neon
Touch controls
All operations are performed by means of touch controls that can be found on the control panel. Each touch control
has a visual display that corresponds to it. Every time you press a touch control, an acoustic signal will sound.
Turning on and off
•
Touch the on/off button (1)
•
The cooking zone indicators (6) will both read "0"
•
The decimal point symbols (7) will flash on and off.
Advertisement
Summary of Contents for saco Baumatic BTC2.2
- Page 1 Operating Instructions – Hob Baumatic BTC2.2 Control Panel 1. On/Off button 2. Safety lock button 3. Safety lock neon 4. Minus button 5. Plus button 6. Cooking zone indicator 7. Decimal point symbol 8. Double hyperspeed zone dual circuit On/Off button 9.
- Page 2 Turning on a zone and setting a power level A zone must be selected within 10 seconds of turning the hob on. Press the plus (5) button for the zone that you want to use. • • Adjust the zone between power levels 1 and 9, using the plus and minus buttons. By holding down either of these buttons, the value on the zone indicator (6) will adjust up or down every 0.3 seconds Turning on the dual circuit zones...
- Page 3 Turning the hob off Once you have switched off all of the cooking zones, you should turn off the hob. Press the On/Off button (1). Residual heat indicator After a zone is switched off, the corresponding cooking zone indicator (6) will show the letter “H”, alternating •...
- Page 4 Increasing the power level during automatic pre-heating If a zone is already within automatic pre-heating mode, you can adjust the power level. • • To increase the power level press the plus button until it reaches the desired level. The pre-heating time will be adjusted. It will take into account the amount of time that has already elapsed. •...