Matrix Seating HEADS FIRST User Manual

6. F P R
INAL OINTS TO EMEMBER

Check all fasteners periodically to see if they are tight.

Use 12mm wide (1.5mm thick) blade screwdrivers with
care when tightening the low profile screws as not to dam-
age the screwdriver slot.

For some situations it may be necessary to apply Locktite
(type of glue) to any of the connecting screws to prevent
loosening.

If a wheelchair with this head support is used as a seat during
transportation a risk assessment should be carried out..

Check that the covers are washed at 40°C or less and not
tumble dried.

Check that the head support can be removed and replaced
easily from its mounting brackets (and they don't protrude
at the back of the wheelchair pushhandles).

Check that this Guide is issued to and understood by the user
and/or carers.
S C D
ERVICE ONTACT ETAILS
S :
UPPLIED BY
D S :
ATE UPPLIED
T N :
ELEPHONE UMBER
35 Breach Lane, Shaftesbury, Dorset, SP7 8LD, England
Website: www.matrixseating.com Email: sales@matrixseating.com Fax: +44(0)1372.700.372
:
Getting in touch with us....
Tel:
+44 (0)1795 477280
Fax:
+44 (0)1795 229692
Email:
sales@rms-kent.co.uk
www.ineedawheelchair.co.uk
Phone: +44.(0)844.251.2575
U
SER
The Matrix HEADS FIRST Head Support Range
1. I N :
MPORTANT OTE
The user of this equipment, including carers and professionals
who may adjust and handle it, should read this Guide. This Guide
contains important information about the use and application of
the Heads First head support. Because of the clinical and safety
ramifications of misuse, injury to the user or others could result if
you are unclear about how it works. Please keep this Guide to
refer to later.
Matrix Seating Limited (MSL) accepts no liability from mis-
application of this product.
G
UIDE