Summary of Contents for Swimline HydroTools Solar Reel 50050
- Page 1 Item #50050 Instructions Premium Aluminum Reel System For Above Ground Solar Pool Covers...
- Page 2 Item # 50050 Aluminum Reel System For Above Ground Solar Pool Covers 1. Congratulation on your purchase of our PREMIUM ALUMINUM Solar Reel System for Above Ground Pools. Please follow the instructions carefully so as to not void our warranty. 2.
- Page 3 4. Depending upon the size of your pool you will also require one of the following tube kits: (Tube Assembly is detailed below and on back cover) Item #51120 3” Tube Kit Item #51160 3” Tube Kit Item #51200 3” Tube Kit Item #51240 3”...
- Page 4 8. Assembling The Tube Kit: (Continued) Loosely assemble tubes together. Slide excess width into adjoining tubes, dividing it up as equally as possible. Note: You must have a minimum of 9” overlap in each tube! Measure the width across the pool from tube insert to tube insert and adjust length of the tube assembly to fit the span. Once you have determined exact length of tube assembly, AND With tubes on flat surface, lock the tubes together by rotating each adjoining tube in the opposite direction.
Need help?
Do you have a question about the HydroTools Solar Reel 50050 and is the answer not in the manual?
Questions and answers