SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT 0020609 Manual

RF Wireless Remote Control DC Motor Receiver (Model 0020609)
This is the DC motor controller. The DC motor controller can remote control one DC motor (DC12V/24V) rotates in positive/ reversal direction.
You can connect two restrictive switches to receiver and use them to stop motor rotation.
Receiver Features:
Wireless control, easy to install
With high power of 15A
Control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with
voltage DC12V / 24V.
You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the
wireless signal can pass through walls, floors and doors.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 315MHz / 433MHz
Working Distance:
With a transmitter CB-3 to form a complete set, the distance can reach 2000m in an open ground. The distance of 2000m is a theoretical data, it
shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions,
and will be exposed to some interference by other signals. Therefore, the actual distance may or may not reach 2000m.
External Telescopic Antenna:
Length of external telescopic antenna: 108mm / 445mm (stretch)
External telescopic antenna use SMA connector.
If you stretches the external telescopic antenna, it can have a further working range.
Receiver:
Model No: 0020609
Coding Type: Fixed code or learning code
Coding Setting: By learning
Power Supply (Operating Voltage): DC12V±1V (S1PF3-DC12-ANT3), DC24V±1V (S1PF3-DC24-ANT3)
Output: DC12V (S1PF3-DC12-ANT3), DC24V (S1PF3-DC24-ANT3)
Case Size: 100mm x 67mm x 39mm
Quiescent Current: 5mA
Rated Current: 15A
The Maximum Instantaneous Current of Starting Motor: 30A
Usage:
Power supply:
Connect power supply DC12V / 24V to terminal "INPUT"; connect motor to terminal "OUTPUT". You can exchange the output wires of motor to
change the rotating direction of motor.
Function of transmitter:
Press button A on remote: terminal "Output" output DC power, motor rotates in positive direction.
Press button C on remote: terminal "Output" output DC power, motor rotates in reversal direction.
Press button B on remote: motor stops.
Function of manual buttons in receiver:
Press button K3 in receiver: terminal "Output" output DC power, motor rotates in positive direction.
Press button K1 in receiver: terminal "Output" output DC power, motor rotates in reversal direction.
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: sale@carymart.com