With the built-in super-magnets in the case, make it an ideal manager for remote and un-powered installations such as heavy construction equipment, RV’s and vehicles of all descriptions. With its super-magnet case, the GT3012 can be installed under a vehicle for a quick and accurate covert tracking installation.
4.2 SIM Card Installations and Removal b. Open waterproof rubber c. Insert SIM card into the SIM slot, metal face up, clipped corner to the right. d. Green light is flashing for couple second and turn to on always on e.
details. 6.3 Emergency takeover function With the proper password, any phone number could takeover of full functionality under emergency situation. SMS: *master*123456*+1XXXXXXXXXXX * (For instance, master controller phone number is +1XXXXXXXXXXX. +1 refers to the country code. XXXXXXXXXXXX is the cellphone number. Please make sure country code is included, and 0 is not needed before cell phone number) You will receive back a text that says: "Master controller change is successful for +1XXXXXXXXXXX, the new master controller is +1XXXXXXXXXXXX."...
9. Website Tracking The GT3012 is purchased with an account on the http://gps.gaintrace.com website. Tracking data, per the default and variable settings is transmitted via GPRS to the server where it is viewable from ANY web browser, where the user has unlimited access to the full suite of reports and data displayed on Google Maps.
Device Response: 10. Deep Sleep The Deep Sleep function enables the GT3012 to be available for long working periods needed, tracking remotely when either the timer wakes the unit or motion is detected. The GSM and GPS are both off during deep sleep, with only the timer drawing power. Since both the radio and GPS are...
device requires a minute or two to establish a location and send the first record upon waking. 10.1 SMS: *sleep*1-99* (1-99 represents hours of deep sleep period.) “System is going to enter deep sleep function, data will be uploaded every XXX Device Response: hours.”...
15. Branding Settings Send a command enable you to use your own brand in the reply text message. It is default as Null This is a factory command. Only manufacturer is able to send this command. SMS: *brd*XXX* (XXX refers to the new brand name) “XXX inform: The new brand name is set.”...
Page 12
*checkoff* / *check*0* End check function Deep Sleep Setting *sleep*1-99* 1-99 represents hours of deep sleep period. * sleepoff* End Deep Sleep function. GeoFence Setting *fence*1-99* 1-99 represents 01-99km radius “bubble” around the device. *fenceoff* End Geofence function Status query *status* Check system status Multi Controller...