ANAB X5 Handbook

Saw chain grinder

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Handbook for

ANAB

Chain Grinder Mod. X5

Version 1.2

Table of Contents

Need help?

Do you have a question about the X5 and is the answer not in the manual?

Questions and answers

Summary of Contents for ANAB X5

Page 1 Handbook for ANAB Chain Grinder Mod. X5 Version 1.2...
Page 2: Table Of Contents
Trouble shooting Problem solving ………………………………………………. 23 Attachment Individual images …………………………………………….. 24 Malfunctions ………………………………………………….. 28 EC declaration of conformity ………………………………… 29 Author: Holm Schäfer HS Electronic Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 3: Preface
Preface Thank you for deciding to buy our saw chain grinder of the type ANAB X5 The aim of this manual is to provide you with basic knowledge of the structure and the handling of the machine. Also for you, who already have good knowledge of grinding machines, this book help.
Page 4: General Information
General information The ANAB automatic sharpening machine X5 Is an automatic grinding machine for sawing and machine chains. Through the operation and adjustment possibility of the machine, almost all chain types can be ground. By automatically sensing the cutting teeth the grinding wheel is always in the correct position.
Page 5: Safety Regulations
The electrical connection should be earthed and the work carried out by a professional! In the case of an electrical fault, always use a qualified electrician! If you have other faults on the machine, contact your service technician ANAB! If the machine is working, there should be no unauthorized persons nearby! If a warning sign is damaged or unreadable, it should be replaced as soon as possible! Copyright ©...
Page 6: Technical Specifications
Upper position 3/4“ 8 mm grinding wheel Lower position 15 mm 4 mm grinding wheel Lower position 20 mm 4 mm grinding wheel Lower position Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 7: Space Required For Machine
Around the machine, there should be so much space that the work at the machine is not complicated Also, the access to doors, gates and shelves for service work must be ensured. Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu...
Page 8: Control Panel
Please note After about 300,000 sharpened teeth Total number of teeth flashes and alerts you to service the machine. Please contact your dealer or www.anab.nu. Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 9: Operating Wheels And Buttons
Scale for grinding angle β Air filter with water separator Chassis Cover Setting for grinding quantity Scale for tooth division adjustment Rotary knob for feed support Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 10 Emergency Shut-Off Main switch Rotary knob for lowering speed The control panel Switch for cooling water pump Switch to change the grinding angle β Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 11: Settings
Settings Sharpening: The ANAB X5 Is designed for sharpening saw chains with a tooth pitch up to 20 mm and a drive link thickness of up to 3.0 mm. Before sharpening: In principle, it is possible to grind difficult or damaged chains, but for safety reasons it is not recommended.
Page 12: Compressed Air, Drive Link Thickness, Tooth Division
4. After adjustment, tighten the clamping lever. Figure 1 5. Check the feed for the current chain. You can do this in step operation do. Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 13: Feed Setting, Distance To Feed Table
2. Proceed step by step until a cutting tooth has been advanced. 3. Use the rotary knob to adjust the distance to drive to approx. 0.5 mm Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 14: Sharpening Angle Adjustment, Number Of Cutting Teeth
. Then a keyboard appears. Here you can input the number of cutting teeth. 3. Press the "Left" button next to the icon to exit the submenu. Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 15 5. When finished, press the button again to turn the engine off. Rotation 6. Do not forget to switch the to exit the setting page. 7. Press the left button Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 16: Grinding Depth And Tooth Length, Set Up Cer Grinding Wheel 15 Grinding Wheel Speed, Grinding Time, Control Panel
Adjustable between 0.5 and 9.0 seconds. On The direction of rotation of the grinding wheel changes Rotation Off The direction of rotation fits the CER wheel. Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 17 Press the numbers to show the keyboard. Here the number of cutting teeth can be entered. Enter Short pressure returns to the main page. Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 18 Grinder Left Both Teeth Frequency The upward step Turning left Both feeding sensors Frequency converter takes too long takes too long actuated gives alarm Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 19: Maintenance
Wash the container with detergent and warm water Solvents such as acetone, benzene or certain alcohols can dissolve plastic. If in doubt, consult your dealer Reservoir with filter Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 20: Adjusting The Air Pressure
(See Figure 6) 2. Reduction of pressure: Rotate anti-clockwise. Set somewhat below prescribed pressure and then again Increase to the prescribed pressure. Figure 6 Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 21: Replacing The Grinding Wheel
5. Replace the protective cover. Figure 7 Use only original wheels ANAB In order to obtain a good grinding result since the wheels are selected according to our experience with many automatic grinders. Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved.
Page 22: Belt Tension
6. Replace the protective cover. Figure 8 Please note: The belt tension should be approx. checked after approx. 20 operating hours and be adjusted if required. Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 23: Replacing The Drive Belt
Is the right grinding wheel specified on the setting page ? Switch off the machine with the main switch and after a few seconds switch it on again. (The frequency inverter is reset) Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 24: Attachment Individual Images
Individual figures Feed control Feed sensor FeederOut Unit for setting the teeth Tooth division unit Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 25 Individual figures Lifting device for grinding wheel Upper Limit sensor GrinderUp Lower Limit sensor Grinder- Down Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 26 Individual figures Swivel cylinder Right microswitch Left microswitch GrinderRight GrinderLeft Terminal clamp The height-adjustable chain holder Oval hole Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 28: Malfunctions
If the alarm does not switch off, Frequency inverter error Frequency converter a more thorough investigation of the gives alarm of the error is required. Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...
Page 29: Ec Declaration Of Conformity
The operating instructions belonging to the machine are in the country language of the user. Ås: ..............……………………………........Date Signature / Managing Director Anders Nilsson Copyright © 2019 belongs to ANAB in Östersund, Sweden. All Rights Reserved. Homepage: www.anab.nu Email: info@anab.nu...