Related Manuals for JCA Collective 42912040
Summary of Contents for JCA Collective 42912040
- Page 1 8FT （ 244cm) TRAMPOLINE AND ENCLOSURE OWNER'S MANUAL KEYCODE:42912040 product Maximum weight of the user shall NOT exceed 165 lbs/75 kg for this product. CUSTOMER SERVICE:...
- Page 2 PRODUCT WARRANTY CUSTOMER SERVICE...
- Page 3 It is important that children are not involved in the assembly of the trampoline.
- Page 6 Ensure any pads (where they are required) covering the frame/suspension system are securely attached at all times. Enesure the enclosure is securely attached and in good condition at all times. Make sure that the area around, underneath and above the trampoline is clear of objects that could interfere with the person jumping.
- Page 7 Place the trampoline on a flat level surface with impact attenuating properties such as grass and ensure that it is sufficiently stable to prevent it from tipping over and/or blowing away. Sandbags or pegs may be suitable anchorage devices.
- Page 8 Diagram Description Quantity Top rail Bracket without welding Bracket with welding Horizontal Leg Bend Leg Frame Pad Spring Enclosure net Steel top rim Upper Enclosure pole Lower Enclosure pole...
- Page 9 Diagram Description Quantity Screw for plastic connector Plastic connector Screw for Leg Spring tool Wrench Hexagon wrench(M5) Hexagon wrench（M4） Needle for Enclosure net tie down strap Enclosure net tie down strap Leg to Frame hardware...
- Page 10 1.Connect the Top rail（A)with the Bracket without welding(B）together as below picture show,repeat 3 times, pay attaention to the direction A x3 B x3 2.Connect the Top rail（A)with the Bracket with welding(C）together as below picture show, repeat 3 times,pay attaention to the direction A x3 C x3...
- Page 11 3.Connect the finished parts of step 1and step 2 together as below pictures show, pay attention to the direction 4.Connect the Horizonal Leg（D）and the Bend Leg （E）together，then secure it use the screw for Leg(O) as below picture picture show O x6 D x3 E x6...
- Page 12 5.Connect the finished parts of step 3 and the finished parts of step 4 together as below picture show 6.Use the Leg to Frame hardware(V)to connect the Bend Leg（E）and the Bracket without welding(B), Bracket with welding(C) as below picture show V x6...
- Page 13 7.Turn over the finished parts of Step 6 and connect as below picture one by one.
- Page 14 Warning! When attaching the springs, do not place your hands, arms, legs or any other body part close to the connector points(i.e. joints connecting the steel tubes).The connector points can become pinch points as the trampoline springs tighten up. Wear heavy duty working gloves to protect your hands from pinching by the springs and protective goggles to avoid injuries to the eyes.
- Page 15 The first hole H*48pcs The curved hook end connected to the triangle -ring. ! Please pay attention to the end shape of the spring connect to the top rail...
- Page 16 9.Put the Lower enclosure pole (L)into the Bracket with welding(C) as below picture show, please pay attention that the clip must be pulled out L x3 10.Put the Frame Pad(G)on the Mat(F),pay attention that the opening of the pad aligned with the Lower Enclosure pole(L) G x1...
- Page 17 11.Connect the steel top rim(J) with the Enclosure net(I)top rim tunnel as below picture show I x1 J x3 12.Connect the steel top rim (J) with the Plastic connector（N）by Screw(M)，then put the Plastic connector(N) into the Upper Enclosure pole(K),please make sure the clip must be pulled out. K x3 M x3 N x3...
- Page 18 13.Connect the finished part of Step 12 and the Lower enclosure pole (L) as below picture show 14.Put up the Pad(G), connect the Enclosure net and the Mat(F) by the needle(T) and the Enclosure net tie down strap (U) as below picture show T x1 U x1...
- Page 19 15.After finishing the Enclosure net assembly,please put down the Pad , tighten the elastic strap on the pad (G) and the traiangle ring on the Mat(F) together to fasten them.
- Page 23 (a) Components of this trampoline are susceptible to deterioration from use and environmental conditions, such as sunlight, rain, salt and heat, to varying degrees. It is essential that you inspect the trampoline before each use and replace any worn, defective, or missing parts before further use.
-
Page 24: Fundamental Bounces
FUNDAMENTAL BOUNCES STANDING BOUNCE KNEE BOUNCE 1.First , assume kneeling position in center of mat, back straight, eyes looking directly forward. 2.Pump your way to your feet by bouncing, using 1.Start in the center of mat, with feet your arms as in standing bounce. shoulder width apart, arms at side. - Page 25 BACK DROP PIROUETTE 1.Lie on your back on mat, spread your legs slightly and raise them about 45 degrees from the surface of the mat， raise your arms to HALF PIROUETTE: corresponding angle, raise head and look at Done like a standing bounce，but at top of end of trampoline.
-
Page 27: Product Warranty
Product Warranty This product is warranted to be free from defects in material and workmanship under normal use and service condi- tions for one (1) year after the date of purchase. The frame on trampolines is warranted for one (1) year after the date of purchase. - Page 28 ARE NOT EQUIPPED TO PROVIDE CUSTOMER SERVICE FOR THIS PROD- UCT. CUSTOMER SE RVICE: Name: JC A Collective Email: service@jcacollective.com Phone Number: +61 423 259 751 Office Hours: Monday to Friday 9am to 5pm Keycode:42912040 PO number: The date of purchase: The components will deteriorate over time.