Summary of Contents for Yunkai New Energy EKR0535
- Page 1 Contactless Wireless Charger User Manual EKR0535 Thank you for choosing this product! Please read this user manual carefully before use.
- Page 2 Product Introduction Charging sensing distance: The distance between the magnetic induction coil built in the mobile phone and the magnetic induction coil built in the wireless charger should be no less than 18mm and no greater than 35mm. Please do not use thick phone case when using this product.
- Page 3 What’s In This Box? Wireless Charger Power Adapter picture picture 3M Sticker Magnetic Shielding Patch picture picture...
- Page 4 Installation Instructions: Installation Mode --- 3M Adhesive 2. The equipment is pasted to the bottom of the table. 1. Tear off the double-glue and paste it to the top of the wireless charger. 4. Align the center of the magnetic Measure corresponding shielding patch with the center of...
- Page 5 Directions for use 1. Connect the wireless charger with the power source. 2. Put the mobile phone on the magnetic shielding patch to charge. When the charger is working, the indicator light lights up. Note: Only can be used by the device that conforms to the QI standard. Attentions 1.
- Page 6 Warranty Regulations 1. Product Warranty Zhejinag Yunkai New Energy Technology Co., Ltd provides warranty services as follows: Functional components: warranty for 1 year 2. Disclaimer The following cases are not covered by warranty: (1) Damages caused by preservation or improper use not according to product...
Need help?
Do you have a question about the EKR0535 and is the answer not in the manual?
Questions and answers