Justrite Hughes STD-58G Installation, Operation And Maintenance Instructions

Emergency eye and eye/face wash equipment

Table of Contents

Download this manual

Installation, Operation and Maintenance Instructions

Emergency Eye and Eye/Face Wash Equipment

• Self-Contained: STD-58G

Warranty Information

Hughes Safety Showers Ltd guarantees the products it manufactures or sells against defects in workmanship and material for a period of one

(1) year from the date of shipment or date of invoice, whichever is later. The product must be used, maintained and installed according to the

instructions and procedures provided, or this warranty is void. Any alteration or modification of the product will also void this warranty. Hughes

Safety Showers obligation under this warranty is limited to repair or replacement of defective products. No other warranty or remedy shall be

provided. This warranty specifically does not guarantee or cover payment or reimbursement of any damages or consequential damages other

than repair or replacement of the product.

Any claim under this warranty must be made in writing within twelve (12) months of the date of shipment or the date of invoice, whichever is later.

The owner must prepay shipping costs of all products returned to Hughes Safety Showers Ltd under this warranty. If it is determined that the

product is defective in material and /or workmanship the repair or replacement will occur, at Hughes Safety Showers option, at no charge and

return freight prepaid by Hughes Safety Showers. All other return of the product to the owner shall be at the owner's expense.

Proper use by the customer is necessary for the effectiveness of the product, as well as the safety of those using the same. The user is solely

responsible to determine the suitability of any Hughes Safety Showers product for any intended use. The user assumes all risk and liability for

use of any Hughes Safety Showers product. User specifically acknowledges receipt of proper instructions regarding the use of the product in

the original packaging and disclaims any consequential damages to person or property, damages for loss of use, lost time, loss of profit, lost

income, loss of the Hughes Safety Showers product itself and/or other incidental or consequential damages other than as warranted by this limited

warranty. User accepts the responsibility of removing from service any product that becomes worn out, unusable, unfit for the intended use or

defective in any way such as to make the product a potential safety hazard. Hughes Safety Showers is unable to undertake such obligations or

responsibilities on behalf of the user as the user is in sole possession and control of the product.

Table of Contents

Need help?

Do you have a question about the Hughes STD-58G and is the answer not in the manual?

Page 1 Installation, Operation and Maintenance Instructions Emergency Eye and Eye/Face Wash Equipment • Self-Contained: STD-58G Warranty Information Hughes Safety Showers Ltd guarantees the products it manufactures or sells against defects in workmanship and material for a period of one (1) year from the date of shipment or date of invoice, whichever is later. The product must be used, maintained and installed according to the instructions and procedures provided, or this warranty is void.
Page 2 General Considerations When planning the installation of emergency safety showers and eye/face wash equipment, the advice of a qualified first aid representative or medical advisor should be sought to establish the most suitable location and procedures for first aid and decontamination. Installation should be in accordance with local legislation and industry standards such as EN15154 and/or ANSI Z358.1-2014 recommendations.
Page 3 Operation Employees working within hazardous areas must be trained in the use and location of emergency safety showers or eye/face wash equipment. Instructions for all emergency equipment should be readily available and accessible to personnel. Activation is via the push plate. The spray nozzles are fitted with pop-off dust covers that are removed upon activation. (Optional Optiflex is operated by removing from the mounting bracket and pressing the re lever to activate the lock-on actuating button.