Download Print this page

MarCELL SPuck Instruction Manual

Instruction Guide

The SPuck water sensor enhances the monitoring capabilities of the MarCELL by

providing water detection alarms.



Communicates wirelessly with the MarCELL device to instantly indicate

presence of water



Operates for years on a single CR2025 coin cell battery



Monitors battery life and will report when it's getting low



Up to 16 SPucks can communicate with one MarCELL

Communication distance varies depending on walls and objects in the path.

Generally the range is 50 to 300 feet.

Need Help? Contact us today (866)568-2770 or support@sensoredlife.com

Table of Contents

Need help?

Do you have a question about the SPuck and is the answer not in the manual?

Page 1 Instruction Guide The SPuck water sensor enhances the monitoring capabilities of the MarCELL by providing water detection alarms.  Communicates wirelessly with the MarCELL device to instantly indicate presence of water  Operates for years on a single CR2025 coin cell battery ...
Page 2 MarCELL and SPuck are communicating properly If the LED on the MarCELL is not blinking blue, please try the following  Please be sure you have completed steps 1 and 2 and your SPuck has been registered ...
Page 3 Step 4 – Place Into Service  Place the SPuck on a flat surface. If water comes in contact with either of the water sensors, the SPuck will send an alarm to the MarCELL. When transmitting the SPuck’s LED will flash quickly.
Page 4 MarCELL flashes when pressing the test button  Move the MarCELL closer to the SPuck to test whether there is a range issue  Press the Test button to make sure the SPuck is reset  If the SPuck is still detecting the presence of water...