Advertisement
Quick Links
iBUYPOWER
529 N Baldwin Park Blvd
City of Industry, CA 91746
iBUYPOWER Troubleshooting Guide
Troubleshooting 100: Unboxing
The purpose of this guide is to provide a thorough and detailed walkthrough of the steps to get your PC
unpacked and ready for setup. As a 100 level guide, this should be accessible to all users.
Tools Required
Clean and dry hands
Philips head screwdriver
**Important Notes**
Read through this guide in its entirety before starting. No matter how confident you are, please do not
skip a single step unless the guide tells you do. All steps in this guide are included deliberately and
skipping steps can result in the guide being ineffective.
Always make sure the computer is completely off and unplugged while working inside of it.
If you ever feel the slightest bit uncomfortable or unsure, please reach out to our Tech Support team
either through Live Chat, Email, or Phone.
New PC
Congratulations on your new gaming PC. Before jumping straight into powering the machine on, there
are a few steps we recommend taking during unboxing that can help with your setup and usage
experience.
Avoid Static
While modern PCs are much more resilient to static discharge damage than in the past, it is still a good
precaution to take to avoid shocking the components inside your PC. Avoid carpeted areas if possible or
be barefoot if on carpet. Removing the plastic bag from around the PC can generate a lot of static make
sure to touch a grounded metal object before handling any components within the PC. Simply touching
the metal of the case is usually good enough.
Unbox upside down
We recommend opening the top of your PC box and placing it upside down on the floor or table, then
lifting the box off the PC, rather than trying to lift the PC out of the box. Sometimes handles can get
stuck in the packing foam, so make sure they are not sticking into the box before lifting.
Technical Support Hours:
Mon - Fri: 8:30 am - 5:00 pm PST
Toll Free: (888) 618-6040
Phone: (626) 269-5170
techsupport@ibuypower.com
Advertisement
Summary of Contents for iBUYPOWER ARC 647
- Page 1 529 N Baldwin Park Blvd City of Industry, CA 91746 iBUYPOWER Troubleshooting Guide Troubleshooting 100: Unboxing The purpose of this guide is to provide a thorough and detailed walkthrough of the steps to get your PC unpacked and ready for setup. As a 100 level guide, this should be accessible to all users.
- Page 2 529 N Baldwin Park Blvd City of Industry, CA 91746 Figure 1 - Unbox upside down Find all your accessories Go through all the packaging to locate all the accessories that come with the PC Figure 2 - System with accessories You may find some but not all of the following depending on your PC’s specs...
- Page 3 529 N Baldwin Park Blvd City of Industry, CA 91746 Figure 3 - Wi-Fi antennas Remove internal foam If your PC has a high end or heavy graphics card, you may have a piece of expanding foam on the inside of the system to prevent damage during shipping.
- Page 4 529 N Baldwin Park Blvd City of Industry, CA 91746 Figure 5 - Side panel styles When removing the foam, ensure that it does not snag on any fans or cables. Save all packaging material After unboxing, don’t immediately toss the packaging material that came with the PC. In case of any immediate service needs, it may be necessary to reuse some of the packaging.