Advertisement
INSTALL VIDEO
6x
ADHESIVE
GRIPPER
Please read the instructions carefully before starting.
CLEAN SURFACE - Prior to installation, be sure desk surface is clean and dry.
1. POSITION GRIPPERS IN
CORNER LOCATIONS
One at a time, use ruler on instructions to
measure 3 inches from corner for each gripper.
2
3in
1
3in
2in
1in
Installation
3
3in
4
2.PEEL AND STICK GRIPPER
( Repeat Step 1 & Step 2 for
each of the 4 Grippers )
PEEL
Stick each gripper down
by pressing it firmly onto desk
EXAMPLES
1x
SHIELD
Patent Pending
PRESS
FLIP
PAGE
Advertisement
Table of Contents
Summary of Contents for Poly-Tech Industrial Gazuntite Desk Shield
- Page 1 Installation INSTALL VIDEO EXAMPLES ADHESIVE SHIELD GRIPPER Patent Pending Please read the instructions carefully before starting. CLEAN SURFACE - Prior to installation, be sure desk surface is clean and dry. 1. POSITION GRIPPERS IN 2.PEEL AND STICK GRIPPER CORNER LOCATIONS ( Repeat Step 1 &...
- Page 2 EDGE GRIPPER PER STEP 4 Identical Desks. PEEL PEEL Measure and Cut template as shown below, then mark Gripper locations. PRESS PUSH PUSH HINT: Build a template for quicker installation on identical desks. V 1.1 08.06.20 Poly-Tech Industrial, Inc.
Need help?
Do you have a question about the Gazuntite Desk Shield and is the answer not in the manual?
Questions and answers