Advertisement

Quick Links

IMPORTANT!
IMPORTANT!
Read the ENTIRE instruction manual to become familiar with the features of
the product before operating. This manual contains instructions for safety, operation, and main-
tenance. It is essential to read and follow all the instructions and warnings in the manual, prior
to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.
NOTICE:
NOTICE:
All instructions, warranties, and other collateral documents are subject to change at
the sole discretion of XOTIK. For up-to-date product literature, please visit
www.xotikmodel.com.
WARNING!
WARNING!
dling may result in damage or injury. You are responsible for following all safety
precautions as outlined in this instruction manual.
FEATURES
2.4GHz Spread Spectrum Technology
Fully digital proportional steering and throttle control
Push button steering trim
Adjustable drag brake
Ergonomic drop wheel design
Rechargeable LiPo battery
130 size motor
Roller guided anti-collision bumper
Product includes a lithium polymer (LiPo) battery. Improper han-
1

Advertisement

Table of Contents
loading

Summary of Contents for XOTIK XC324 RTR SET

  • Page 1 NOTICE: NOTICE: All instructions, warranties, and other collateral documents are subject to change at the sole discretion of XOTIK. For up-to-date product literature, please visit www.xotikmodel.com. WARNING! WARNING! Product includes a lithium polymer (LiPo) battery.
  • Page 2: Battery Requirement

    CONTENT AND SPECIFICATIONS XTX200 Transmitter XC324 Chassis USB Charger Optional -1 and +1 Tie Rods XTX200 TRANSMITTER XTX200 TRANSMITTER XC324 CHASSIS XC324 CHASSIS Channels: 2 Dimensions: (L) 156 x (W) 97 x (H) 30mm Frequencies: 2.405 – 2.475GHz Weight: 88g Modulation: FHSS spread spectrum Input Power: 2.9 –...
  • Page 3: Safety Precautions

    • Keep out of reach of children! • Do not charge or use a battery that is deformed, bent, crushed, or has any type of visible damage. • You must only use the included, factory-approved charger with this LiPo battery. •...
  • Page 4: Transmitter Setup

    CHARGING THE CAR BATTERY Connect to 5V USB Power Adaptor. (Not included) The plug only goes in one way. Do not force! 1. Turn off both transmitter and car. 2. Plug the charger into a USB power adaptor and then into the port on the bottom of the car. Do not force! 3.
  • Page 5: Operation

    Remove the safety screw and press the lever at the base of the handle to swing open the battery door. Install the two batteries according to the orientation stated inside the battery compart- ment. After battery installation, close battery door and tighten safety screw. Press in the power button on the control panel on top of the transmitter.
  • Page 6 • To turn, rotate the transmitter wheel to the left or right. Use small movements and let go. • To slowly drive forward, pull the trigger slightly. • To drive faster, pull the trigger further. • To drive in reverse, push the trigger. •...
  • Page 7: Powering The System

    POWERING THE SYSTEM IMPORTANT! IMPORTANT! Always power on the transmitter first, then power on the receiver. Always pow- er off the receiver first, then power off the transmitter. Never power off the transmitter while running the model. LINKING THE 2.4GHz RADIO SYSTEM 1.
  • Page 8: Care And Maintenance

    For a complete list of replacement and option parts, visit www.xotikmodel.com. WARRANTY AND PRODUCT SUPPORT Do not return your product to the place of purchase. XOTIK will repair or replace factory defects for 30 days from the date of purchase. This warranty specifically does not cover crash dam- age, misuse, or abuse.

Table of Contents