Do you have a question about the IFS61S and is the answer not in the manual?
Questions and answers
Summary of Contents for Cleanflow IFS61S
Page 2
Cleanflow 650ML Automatic Stainless Steel Liquid Soap Dispenser IFS61S User Manual • Thank you for purchasing our automatic soap dispenser • Please read these instructions carefully before installation and retain for future reference INTELLIGENT FACILITY SOLUTIONS Electric Works, 3 Concourse Way, Sheffield, S1 2BJ United Kingdom: +44 (0) 114 354 0047 | Eire: +353 190 36387 sales@ihdryers.co.uk | www.intelligenthanddryers.com...
Page 3
Amount of soap dispensed per activation can be adjusted to be installation between 0.8ml and 6.5ml 6. Make sure the sensor distance area is free from objects 7. Don’t install the dispenser where it will be prone to direct sunlight IFS61S Tank capacity Soap per sensor activation Sensor distance...
Page 4
Suggested distances Upper lid setting button Cover for tank Tank Wall mount * If the dispenser is to be installed above stainless steel objects, the distance from the sensor window to the object must be above 35cm...
Page 5
1. The LED indicator light will flash continuously when the batteries need replacing 2. Ensure you change the batteries at this point before they fully run out 3. Use 6 x AA alkaline batteries making sure all batteries are replaced at the same time. a) Open the upper lid of the dispenser using the supplied key b) Remove the battery box from the battery box cover c) Remove the old batteries and replace with the new ones,...
Page 6
Adjustment 1. Open the upper lid using the supplied key When the batteries are first installed, the LED indicator light will 2. Insert 6 x AA alkaline batteries as per the section of this flash for 5 seconds (approx. 1s/flash). After this, the dispenser manual “battery change”...
Page 7
1. To avoid damage and low performance, please do not excessively knock the dispenser as it has been installed with precision electronic components. check the electronics 2. To avoid damage or corrosion to the products surface or or batteries inner electrical components please only use a soft damp cloth and neutral detergent to clean the dispenser.
Need help?
Do you have a question about the IFS61S and is the answer not in the manual?
Questions and answers