Page 5
In this mode, the Status LEDs on the front panel will glow yellow when the amplifier is in standby mode, and bright blue when powered on.
Page 8
When the switch is set to TRIGGER, the A5500 goes into standby mode and the front panel status LEDs glow yellow. When the connected device is turned on the Status LEDs glow bright blue If you set the MANUAL/TRIGGER switch to Trigger, but don’t connect the A5500 to another device, the Status LEDS will be bright Blue, but the amplifier will...
Power: Bright Blue Standby: Yellow Protection: Red Front Panel Status LEDs The Front Panel Status LEDs will glow yellow for Standby mode Status LEDs will glow Blue Mode and the Front Panel Status LEDs will glow yellow.
Page 10
the Status LEDs will glow Yellow. Front Panel LEDs will glow bright blue. the Status LEDs will not be lit,...
Page 11
happens the front panel LED for the corresponding channel(s) will glow red. The amplifier will mute all channels to protect the amplifier and speakers from damage.