Do you have a question about the LX Series and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Clif Designs LX Series
Page 1
CD80.5LX CD80.5LX MAX POWER 2500WATTS MAX POWER 2500WATTS CD2800.1LX CD2800.1LX RMS POWER 3200WATTS RMS POWER 3200WATTS RMS POWER 6400WATTS at LINKED RMS POWER 6400WATTS at LINKED CD4800.1LX CD4800.1LX RMS POWER 5200WATTS RMS POWER 5200WATTS RMS POWER 12000WATTS at LINKED RMS POWER 12000WATTS at LINKED Class D Amplifier Class D Amplifier Class D Amplifier...
Page 3
At CLIF DESIGNS we are committed to producing musical reproduction at its best, and we are pleased you chose our product. Through years of critical testing procedures and hand craftsmanship, we have created a wide range of products that reproduce music with all the clarity and richness you deserve.
Page 4
TABLE OF CONTENTS FEATURES & SPECIFICATIONS CONTROL & CONNECTION LOCATION CONTROL & FUNCTIONS WIRING DIAGRAM linkable conection diagram WARNING...
Page 5
FEATURES & SPECIFICATIONS LX SERIES "LINKABLE" CLASS D MONO BLOCK COMPETITION AMPLIFIER MODEL:CD2800.1LX MODEL:CD4800.1LX Sigma-delta Platform Sigma-delta Platform Through Hole Technology Through Hole Technology Double sided Epoxy Military Standard PCB Double sided Epoxy Military Standard PCB Center Path Technology(Patent Pending )
Page 6
MODEL:CD80.5LX 2500 Watt 4 Channel 4Ch x 100 Watts Rms + 1Ch x 280 Watts Rms @ 4 Ohms(13.8V) 4Ch x 200 Watts Rms + 1Ch x 520 Watts Rms @ 2 Ohms(13.8V) 2Ch x 430 Watts Rms + 1Ch x 880 Watts Rms @ 1 Ohms(13.8V) 2 Ohm Mono Stable Regulated Power Supply...
Page 7
MODEL:CD2800.1LX/CD4800.1LX MODEL:CD2800.1LX/CD4800.1LX FRONT MODEL:CD2800.1LX REAR MODEL:CD4800.1LX REAR...
Page 8
MODEL:CD80.5LX FRONT MODEL:CD80.5LX REAR...
Page 9
CONTROL & FUNCTIONS Link-IN : Connect this RCA to Link-Out of MASTER Amplifier Link-OUT : Connect this RCA to Link-IN of secondary (slave) Amplifier. 2. RCA Line Outputs: These RCA connections are used when connecting additional amplifiers. 3. Low Level RCA Inputs: These inputs are for signal cables from a source unit. Always use high quality shielded RCA cables.
Page 10
CONTROL & FUNCTIONS 13. Input-selector switch : The sub outputs signal is a sum of the Ch1+2(Front) and ch3+4(Rear) outputs. All three inputs will accept signal for use with a head unit with three preamp outputs. - When set to "1+2Ch" position, the front Inputs (Ch1+2) will provide signal for the entire Amplifier.
Need help?
Do you have a question about the LX Series and is the answer not in the manual?
Questions and answers