Tecnison DV-3199CW Use & Instruction Manual

Tecnison DV-3199CW Use & Instruction Manual

Water vacuum cleaner

Advertisement

Quick Links

WATER VACUUM CLEANER
Type:DV-3199CW
220-230V 50Hz 700W
USE INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DV-3199CW and is the answer not in the manual?

Questions and answers

Summary of Contents for Tecnison DV-3199CW

  • Page 1 WATER VACUUM CLEANER Type:DV-3199CW 220-230V 50Hz 700W USE INSTRUCTION MANUAL...
  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS When using an electrical appliance, basic safety precautions should always be observed, including the following READ ALL INSTRUCTIONS BEFORE USING YOUR TURBOHAND VACUUM. WARNING: To reduce the risk of fire, electrical shock, or injury: 1. Do not leave appliance when plugged in. Unplug from outlet when not in use 2.
  • Page 3 WATER VACUUM CLEANER TYPE:DV-3199CW fig 1 Part name: 1-Flexible hose with handle 2-Handy Cyclonic attachment 3- 2pcs plastic tube 4-Crevice nozzle 5-Multi brush 6-Small water squeeze brush 7-main floor brush 8-Big water squeeze brush 9-bases 10-main machines...
  • Page 4 Fig 2 fig 3 Fig 4 fig 5 Fig 6 fig 7...
  • Page 5 Fig 8 fig 9 fig 10 fig 11 fig 12...
  • Page 6: Assembling The Appliance

    fig 13 fig14 INSTRUCTIONS FOR USE: ASSEMBLING THE APPLIANCE: FIG.1 Open the box ,pick out the attachments FIG.2 Assembling the wheel base. Press the axles of the four castors into the holes in the base until they click into place Mount the assembled basic on the castors and test it to see if in functions Place the barrel on the base and press down until you hear the clips snap into place.
  • Page 7: Before Use

    without the water tube.(fig 7,fig 8)if the water becomes very dirty, replace it. When the sucked up dirt reaches the maximum level in the tubby body, the suction is automatically blocked by the safety ball.(you will notice an increase in the motor revolutions) Remove the moveable cover, you can pour the dirt water like fig 9.
  • Page 8: Troubleshooting Guide

    TROUBLESHOOTING GUIDE PROBLEM POSSIBLE REASON POSSIBLE SOLUTION 1. Plug unit in firmly. 1. Power cord not firmly 2. Check fuse or breaker. HAND VACUUM plugged into outlet. Replace fuse/reset breaker. WILL NOT OPERATE 2. No power in wall outlet. authorized Take it to the Service.

Table of Contents