Summary of Contents for NOB CONTROL SOLUTIONS nOb 001
- Page 1 User Guide Version 1.0.3 - English Model: nOb 001 www.nobcontrol.com info@nobcontrol.com DIONYSIOS MARINOS – NOB CONTROL SOLUTIONS – Louki Akrita 11, 15126 Marousi, Greece Copyright © 2015-2020 NOB CONTROL SOLUTIONS...
-
Page 2: Table Of Contents
Technical Specifications........................14 SAFETY INSTRUCTIONS & WARRANTY INFORMATION...............15 Safety Instructions.........................15 Notice Concerning EU Regulations....................15 Notice Concerning FCC Regulations....................15 Notice Concerning Canadian Regulations..................15 Notice Concerning Australian & New Zealand Regulations............15 Correct Disposal of this Product....................16 Limited Warranty...........................16 Copyright © 2015-2020 NOB CONTROL SOLUTIONS... -
Page 3: Introduction
The user is advised to use nOb to control on-screen parameters in media authoring software. Any use of nOb outside a media authoring environment might take place only at the user's own risk. Copyright © 2015-2020 NOB CONTROL SOLUTIONS... -
Page 4: Requirements
USB 2.0 (or above) port and has been tested with the following systems: Microsoft® Windows® XP (and later) • • Apple® MacOSX® v10.1 (and above) • Linux (Kernel v2.4.0 and above) Copyright © 2015-2020 NOB CONTROL SOLUTIONS... -
Page 5: Getting Started
The next time you connect nOb to your computer, it will work right away, without having to go over the above steps again. That's it! Move on the next chapters to learn all about controlling on-screen parameters with nOb. Copyright © 2015-2020 NOB CONTROL SOLUTIONS... -
Page 6: Operation Modes
Vertical Drag is activated by flipping up the right toggle switch. When activated, turning the knob will result into clicking and dragging along the vertical screen axis. Turning the knob clockwise will result into dragging the element upwards. Turning the knob counter- Copyright © 2015-2020 NOB CONTROL SOLUTIONS... - Page 7 Copyright © 2015-2020 NOB CONTROL SOLUTIONS...
-
Page 8: Advanced Features
You can move the mouse cursor with nOb without inducing a drag (or rather without causing a mouse click), by touching the left toggle switch when you start turning the knob. This way you can move the mouse cursor from one element to another without changing any parameter values. Copyright © 2015-2020 NOB CONTROL SOLUTIONS... -
Page 9: Radial & Diagonal Mode
Notice, that any diagonal movement will set the radius of the circle and any circular movement will set the angle of the diagonal drags. Copyright © 2015-2020 NOB CONTROL SOLUTIONS... - Page 10 TIP: This mode can be useful not only for drawing purposes, but also for performing automation in surround panning situations by draggind an audio source around (circurlarly or diagonally). Other circular UI elements may also be controllable using this mode. Copyright © 2015-2020 NOB CONTROL SOLUTIONS...
-
Page 11: Serial Interface
= Ranging from 000000 (decimal 0) to 111111 (decimal 63), describing the • number of ticks the rotary encoder counted since the last transmission. If you sum the number of ticks during a full knob turn, this should add up to 2400 ticks. Copyright © 2015-2020 NOB CONTROL SOLUTIONS... - Page 12 This command only affects the mouse cursor controlling capabilities of nOb. The serial interface will keep functioning. nOb will not buffer the commands it receives. So, make sure you always wait for a response by parsing the State Byte, before sending the next command. Copyright © 2015-2020 NOB CONTROL SOLUTIONS...
-
Page 13: Adjusting The Knob's Rotation Resistance
Notice that with time, the rotation of the knob will ever become smoother. This is a result of the washers getting worked in, as you keep using nOb. Copyright © 2015-2020 NOB CONTROL SOLUTIONS... -
Page 14: Technical Specifications
Maximum Current: 500mA Operating Temperature: 0 °C – 50 °C (non condensing) Compatibility: USB 2.0 (Complies fully with Universal Serial Bus Specification Rev 2.0) USB Cable Length: 1.5m USB Cable Extension Length: max. 1.5m Copyright © 2015-2020 NOB CONTROL SOLUTIONS... -
Page 15: Safety Instructions & Warranty Information
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Notice Concerning Australian & New Zealand Regulations This apparatus complies with all applicable ACMA regulations. NOB CONTROL SOLUTIONS is represented by: EMC Technologies Pty Ltd... -
Page 16: Correct Disposal Of This Product
DIONYSIOS MARINOS - NOB CONTROL SOLUTIONS. DIONYSIOS MARINOS - NOB CONTROL SOLUTIONS will repair or if repairs cannot be made, DIONYSIOS MARINOS - NOB CONTROL SOLUTIONS will replace this Product, and at no charge if the Product is defective as specified in this limited warranty during the limited warranty period. DIONYSIOS MARINOS - NOB CONTROL SOLUTIONS may use new or remanufactured parts to repair the Product at its sole discretion.