Advertisement
Quick Links
PT100 and PT100W
Ethernet Clock with Proximity Badge Reader
PT100F and PT100FW
Ethernet Clock with Proximity Badge Reader and Biometric Fingerprint Reader
Copyright © Paycor Inc. All Rights Reserved
Menu/Enter Key
Function Keys
Proximity Badge Reader
Main Display Screen
Note: PT100W includes WiFi
Capability.
Menu/Enter Key
Function Keys
Proximity Badge Reader
Main Display Screen
Biometric Reader
Note: PT100FW includes WiFi
Capability.
Advertisement
Summary of Contents for Paycor PT100
- Page 1 PT100F and PT100FW Ethernet Clock with Proximity Badge Reader and Biometric Fingerprint Reader Menu/Enter Key Function Keys Proximity Badge Reader Main Display Screen Biometric Reader Note: PT100FW includes WiFi Capability. Copyright © Paycor Inc. All Rights Reserved...
-
Page 2: Clock Overview
Use the screws to fix the plate on the wall, and then fix the device on the plate. After installation, please make sure the device is reliable, fastened, and stable. Page 2 Copyright © Paycor Inc. All Rights Reserved Updated: 5/26/15... - Page 3 Connect the clock to power Power the clock up using the provided 12V power adapter. Note: Paycor recommends using the equipped DC12V power supply for the device. If the parameters of the power surpass this scope, or the power supply has the bad quality, it is possible to cause damage to the clock and void the warranty.
-
Page 4: Network Setup
Note: Remember to type your Wireless Network Password and not “Your_Password” as seen in the image below. 5. Save the file and eject the USB Drive. You will use it later to load the password into the clock. Page 4 Copyright © Paycor Inc. All Rights Reserved Updated: 5/26/15... - Page 5 5. The Password Setup screen will appear. If you have your USB Drive with the password, insert it into your device, allow the clock a few seconds to recognize and mount the USB. Updated: 5/26/15 Copyright © Paycor Inc. All Rights Reserved Page 5...
- Page 6 7. If the USB device loads the password correctly you will see your network password hidden in the text field. 8. Save the password into the device by clicking the Menu button. Page 6 Copyright © Paycor Inc. All Rights Reserved Updated: 5/26/15...
- Page 7 11. Go back to the Comm menu and select WIFI Setup. If the screen displays an IP Address in the lower left corner, then navigate to the OK button and press the Menu button to save. Note: A reboot may be required after this step. Updated: 5/26/15 Copyright © Paycor Inc. All Rights Reserved Page 7...
- Page 8 4. Navigate to Point IP and press the Menu/OK Button. 5. Enter in the Information and press the Menu button to save. 6. The system will restart and set the Device IP. Page 8 Copyright © Paycor Inc. All Rights Reserved Updated: 5/26/15...
-
Page 9: Enrolling Employees
Proximity Badge Enrollment The employee’s proximity badge number must be entered on the employee’s profile in Perform. 1. Sign in through paycor.com. Hover over the Payroll menu, and click on Manage Employees. Select the necessary employee. 2. Using the left navigation menu, open Time & Attendance. Then click on Employee Security. - Page 10 Place finger firmly and flat in the center of the sensor window. Improper Press Examples Not firm, finger is too elevated Off Center Not flat (do not use the side of your finger) Off Center, and not full finger print Page 10 Copyright © Paycor Inc. All Rights Reserved Updated: 5/26/15...
- Page 11 Note: Adding a password on an Employee will disable the Biometric Reader on the clock for that employee. 1. Sign in through paycor.com. Hover over the Payroll menu, and click on Manage Employees. Select the necessary employee. 2. Using the left navigation menu, open Time & Attendance. Then click on Employee Security.
- Page 12 Note: Once an Admin is added, only that user can change settings on the clock or employees. 1. Sign in through paycor.com. Hover over the Payroll menu, and click on Manage Employees. Select the necessary employee. 2. Using the left navigation menu, open Time & Attendance. Then click on Employee Security.