Advertisement
Air/Hydraulic
12000
Injection Gun
Instructions
Parts Diagram
Pump Pedal
Air Line Inlet
Connection
Quick Connect
Coupler
Handle - Piston Return
Tube / Cap Wrench
Lubrication Hose
Outlet Connection
Safety First!
Use only Genuine Dualco Parts.
Contact Dualco for repair, or rebuilding
procedures.
Pump Cylinder
Barrel Cap
Page 1 of 3
Frame
Pressure Gauge
Piston
Barrel
Advertisement
Table of Contents
Summary of Contents for Dualco 12000
- Page 1 Pump Cylinder Pump Pedal Air Line Inlet Connection Quick Connect Coupler Piston Handle - Piston Return Tube / Cap Wrench Barrel Lubrication Hose Outlet Connection Barrel Cap Safety First! Use only Genuine Dualco Parts. Contact Dualco for repair, or rebuilding procedures.
- Page 2 One end of DUALCO Injection Gun is the Pump containing D. If the Pump cylinder extends or pressure builds, the Pump hydraulic fluid. The other end of the Gun is the Grease Barrel.
- Page 3 Check the fluid level in the Pump reservoir after every 10 hours of use. Drain and replenish clean. Use only DUALCO Injection Fluid in this Pump and change the Pump reservoir with DUALCO Injection Fluid after every 300 as recommended (every 300 hours).
Need help?
Do you have a question about the 12000 and is the answer not in the manual?
Questions and answers