Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Sonnit Looper Sonnit Pedal
-
Page 2: Table Of Contents
Contents 1. In the box. 2. What you’ll need 3. Overview 4. Dimensions 5. Connecting your pedal 6.Audio routing 6.1 Option 1 6.2 Option 2 6.3 Option 3 6.4 Option 4 7. Setup the software 8. Record/Play a Track 9. Extra Functions 10. -
Page 3: In The Box
1.In the box 2.What you need 1. Sonnit Pedal 1. Computer running looping software (either the Sonnit software or Mobius) 2. Worldwide power supply 2. An Audio interface 3. Quick setup guide 3. A MIDI Interface (this may be included in the... -
Page 4: Overview
3.Pedal Overview... - Page 6 5.Connections...
-
Page 7: Audio Routing
6.Audio Routing Options Although the input and output options are not functions of the pedal you will find 4 options for routing your audio signals through your audio interface and the correct in/out setup for the software: 6.1. This is for a simple 2 In 2 Out setup. It uses input monitoring so both the guitar signal and ●... - Page 8 6.1.Audio Routing Option 1...
- Page 9 6.2.Audio Routing Option 2...
- Page 10 6.3.Audio Routing Option 3...
- Page 11 6.4.Audio Routing Option 4...
-
Page 12: Setup The Software
7.Setup the Software You can use the pedal with either the Sonnit Software or Mobius. ● Visit the Sonnit website and download the Sonnit software (or Mobius Scripts). ● If you are using Mobius you will also need to also need to download and install Mobius from the ●... -
Page 13: Record/Play A Track
8.Record/Play a Track Once you have the software setup and the MIDI Record Using Selected Track output from the pedal mapped (for mapping please You can also Record/Overdub/Play using the see the Sonnit Software manual) you are ready to Record/Play All Pedal. This will record. - Page 14 8.Record/Play a Track (cont) Record using a Mix of Track buttons and Selected Track You can also record using a mix of both these methods. Start recording a loop by pressing a Track button. Then once you finish the loop (as the track is now selected) you can use the Rec/Play All button to finish recording and start overdub etc.
-
Page 15: Extra Functions
9.Extra Functions Undo (same in Play and Record Mode) Multiply ● ● The Undo button will undo the last recording. The Multiply button has two different functions in Play Mode and Record Mode. By pressing the Undo button again it will Redo the last Undo. -
Page 16: Troubleshooting
10.Troubleshooting Problem Solution Pressing the Check the pedal has power. When connected the LEDs should flash. ● pedals/buttons doesn’t do Check you have connected the cables properly. The MIDI Out on the Pedal ● anything on the should go to the MIDI In on your interface. The MIDI In on the pedal should computer: go to the MIDI Out on the interface. - Page 17 10.Troubleshooting Problem Solution The track LEDs are not Check the MIDI Out on the interface is connected to the MIDI In on the ● working. pedal. The screen is Off. Press the button at the bottom right of the screen ●...
-
Page 18: Tutorials
11.Tutorials Please see our YouTube channel for a full setup video. 12.Contact If you have any issues with the pedal or need some help please contact support@sonnit.co.uk.
Need help?
Do you have a question about the Sonnit Pedal and is the answer not in the manual?
Questions and answers