OMNIDOTS SWARM Quick Start Manual

QUICK START GUIDE

INSTRUCTIONS PRIOR TO FIRST USE

Product innovations over the air

The first time you power up your SWARM, the SWARM will look for the latest product
innovations to download. Within a few minutes the SWARM is up-to-date and ready
to use. Update status and downloading progress can be viewed on your Honeycomb
overview page. How to create a Honeycomb account is explained below under the
section "Set up your SWARM vibration monitor".

Requirements

Honeycomb subscription. Honeycomb account. WiFi or LTE/ 4G access.
Acceptance of the terms of the license agreement, when creating a new account on:
https://honeycomb.omnidots.com
Power requirements: 5V 1A.

Important notices

Omnidots' hardware product is warranted against defects in materials and workman-
ship for a period of two (2) years from the date of original purchase, and only when
used in accordance with Omnidots' user manuals and instructions. IP65 Enclosure
IP rated as dustproof and protected against water projected from a nozzle.
When disconnected from the power cable, make sure to keep the connector sealed
using the dust cap. This will insure the SWARM remains watertight and dustproof.
Only use the power cable provided by Omnidots, using another power cable can
affect the IP65 protection and cause water or dust damage. Using other power cables
will void the warranty. The provided SWARM power adapter is not intended for
outdoor use. For outdoor use, we recommend using the Omnidots battery pack.
The SWARM, including its SIM cover, should never be opened. Only an Omnidots'
certified facility can do so.

Parts list

SWARM vibration
monitor
Power cable
Power adapter
Screw with plug
(for mounting the SWARM)
Instructions prior to
first use
Rev02 - Quick Start Guide - ©2019 Omnidots