Page 1
DEGAUSSING TOOL Users manual for DJI compasses degaussing tool CFixer is designed for resetting DJI drone compasses to default factory settings...
Page 2
field. It is forbidden to use CFixer in close proximity to the bank cards or other cards with magnetic tape to avoid loss of information stored on the card. ...
Page 3
2. Connect CFixer to the power source. When the indicator lights up CFixer is ready to work. 3. Place CFixer’s hole next to the compass and press the button. You will hear the signal and the light indicator will start to blink.
Page 4
It is recommended to perform compass calibration in a field or a forest CFixer can be used the same way wheather multicopter is turned ON or OFF, it has no influence on demagnetization process of the compass. After having demagnetized multicopter’s compass and having performed it’s calibration, it is not necessary to repeat calibration again after using CFixer.