.Too Copic ABS-1N Using

USING ABS-1N
AIRBRUSH SYSTEM
Set includes:
Air Grip
1. Remove the cap from the Air Adaptor
and screw the Air Adaptor into the base of
the Air Grip.
2. Attach the Air Hose to the base of the
Air Adaptor.
3. Unscrew the top valve most of the way
out. Attach the Air Can nozzle to the hose.
4. Screw the valve back in to activate the
Air Can.
Note: When you are done using the Air
Can, unscrew the top valve on the air hose
before removing from the Air Can.
5. Insert your favorite Copic Classic or
Sketch marker into the Air Grip as shown,
with the broad nib pointing up, then press
the finger pad to spray.
COPIC Airbrush
System Warning
For questions or comments contact us at Imagination International, Inc.
Copic Markers (541) 684-0013, or at copicmarker.com
Copyright © 2014 Imagination International, Inc. All Rights Reserved
Air Hose Air Adaptor
Push to
spray
Air Can 180
3
1
2
5
• Use in an area with good air circulation.
• Copic markers are alcohol based. Keep away from open flame.
• Do not spray on people or animals.
• Air Cans are under pressure. Do not puncture.
Air Can Holder
4
180 180
Put your Air Can
in the Holder to
keep it upright
180