Instrument And Control Functions; Engine Stop Switch; Shift Pedal; Kickstarter Lever - Yamaha YZ125X 2021 Owner's Service Manual

EAM20181
INSTRUMENT AND CONTROL
FUNCTIONS
EAM30182

ENGINE STOP SWITCH

The engine stop switch "1" is located on the left
handlebar. Continue pushing the engine stop
switch till the engine comes to a stop.
EAM30185

SHIFT PEDAL

The shift pedal "1" has adopted a method of 1
down & 5 ups (press-down & kick-ups).
Press it down for N (neutral) to 1st, and kick it up
for 2nd to 6th.
EAM30186

KICKSTARTER LEVER

Rotate the kickstarter lever "1" away from the en-
gine. Push the starter down lightly with your foot
until the gears engage, then kick smoothly and
forcefully to start the engine. This model has a
primary kickstarter lever so the engine can be
started in any gear if the clutch is disengaged. In
normal practices, however, shift to neutral be-
fore starting.

INSTRUMENT AND CONTROL FUNCTIONS

EAM30188

FRONT BRAKE LEVER

The front brake lever "1" is located on the right
handlebar. Pull it toward the handlebar to acti-
vate the front brake.
EAM30189

REAR BRAKE PEDAL

The rear brake pedal "1" is in the right of the
chassis. Press down on the brake pedal to acti-
vate the rear brake.
EAM30611

FUEL COCK

The fuel cock supplies fuel from the tank to car-
buretor and also filters the fuel. The fuel cock
has the three positions:
OFF:
With the lever in this position, fuel will not flow.
Always return the lever to this position when the
engine is not running.
ON:
With the lever in this position, fuel flows to the
carburetor. Normal riding is done with the lever
1-16
1