Advertisement
Quick Links
C1-002
LASER DISTANCE SENSOR
USER MANUAL
Contents
Page 1
Page 2
pages 3
Pages 4-6
Page 7
Page 8
Page 9
August 2020 CALIFORNIA PROPOSITION 65 WARNINGS
WARNING: Cables, Cable Assemblies, and Printed Circuit Boards can expose you
to chemicals including lead and lead compounds which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov
WARNING: Electrical cords, cables, product cords and wire assemblies made with
PVC can expose you to chemicals including DEHP, which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov
WARNING: This Housing of this product is molded out of ABS plastic which can
expose you to chemicals including styrene which are known to the State of
California to cause cancer, and birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device is not intended to be used for residential purposes or in residential
environments
Warnings
Specifications
Overview
Functions
Communications
M12 Cable Pin-out
Installation
Advertisement
Summary of Contents for Frogmouth Automation C1-002
- Page 1 (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. C1-002 This device is not intended to be used for residential purposes or in residential LASER DISTANCE SENSOR...
- Page 2 10 – 120 deg. Fahrenheit (-15 - range 50 degrees Celsius) The C1-002 is only intended to be used as a tool in the functionality of • an automated system and not as a stand alone system. It is the end user's sole responsibility to ensure that this product is the proper tool for their system design.
- Page 3 C1-002 Overview The C1-002 is a multifunction adjustable laser distance sensor/parts counter that utilizes an invisible IR laser and TOF (time of flight) technology to measure distance and communicate information to other devices such as micro- controllers, computers or PLC's including devices such as Arduino®...
- Page 4 • Timing budget speed: high. The discrete output is NPN which The C1-002 has three speed modes that can be completes the ground in the circuit. The max toggled by pressing and holding the (A) and (B) current through this output is 400 mA and the buttons simultaneously.
-
Page 5: Cable Pinout
When connecting to a computer use a TTL to USB converter and connect TX on the C1-002 to RX on the converter, + Volts on the C1-002 to + Volt on NPN Discrete Output the converter, RX on the C1-002 to the TX on the... -
Page 6: Installation
Mount the C1-002 by installing a ¼ inch bolt, nut and locking washer through the hole in the supplied bracket. Mounting this device as close to the target as possible while...
Need help?
Do you have a question about the C1-002 and is the answer not in the manual?
Questions and answers