Thank you for purchasing the Waxed Cotton Canvas Pet
Hammock. Your four legged best friends will enjoy the hammock,
and your vehicle and backseat will remain clean and protected for
years to come.
Installing, and removing, the hammock is quick and easy.
The hammock installs over the backseat of your vehicle and
requires front and back seat head restraint posts to install.
Our hammock uses legendary waxed cotton canvas fabric detailed
with corduroy trimming. The result is highly functional pet
hammock with a distinctive traditional design.
The hammock gains character with age.
Step 1:
Remove the hammock from the plastic bag.
Position the hammock on the back seat so the waxed cotton
canvas side is facing up (note the bottom of the hammock is plaid
cotton) and the seat belt pockets are positioned to allow the seat
belts to pass through the hammock.
Step 2:
Locate the four webbing straps and side release buckles that are
on the top edge of the hammock. Undo the side release buckles
(by squeezing the buckles) attached to all four webbing straps.
Loop the webbing around the driver's and front passenger seat
head restraint posts. You may need to raise the head restraints to
get to the posts underneath. Reattach the two ends of the side
release buckles.
Loop the webbing straps around the back seat passenger head
restraint posts. Reattach the side release buckles.
Step 3:
The top of the hammock may hang too far down from the head
restraint posts. If this is the case, adjust the webbing straps
through the side release buckles to your desired hammock height.
http://floppyearsdesign.com/
Waxed Cotton
Canvas Pet
Hammock
Installation and Cleaning
info@floppyearsdesign.com
®
Seat
belt
pockets
Webbing
straps and
side release
buckles
Continued...