CCDCAM KV8252-IM User Manual

Ip video intercom waterproof vandal-resistant door bell station

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

IP Video Intercom

Waterproof Vandal-Resistant

Door Bell Station

User Manual

KV8252-IM

Table of Contents

Summary of Contents for CCDCAM KV8252-IM

Page 1 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station User Manual KV8252-IM...
Page 2 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Welcome Thank you for purchasing our Product! This manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series IP Video Intercom Vandal-Resistant Door Station features and functions, as well detailed menu.
Page 3 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Warnings ● All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. ● Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value.
Page 4 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual ● Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). ● Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time.
Page 5: Table Of Contents
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Table of Contents 1 Overview ..................... 1 1.1 Introduction ..................1 1.2 Main Features ................... 1 1.3 Typical Application ................2 2 Appearance ....................3 3 Terminals and Wiring ................4 3.1 Terminals and Interfaces Description ..........
Page 6 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 6.4.4 QOS Settings ................27 6.4.5 IGMP Settings ................ 28 6.4.6 SIP Settings ................29 6.4.7 PORT Settings ................ 31 6.4.8 DDNS Settings ................ 32 6.4.9 Protocol Settings ..............33 6.5 Camera Settings ................
Page 7: Overview
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 1 Overview 1.1 Introduction The door station, featuring in the vandal-resistant design, convenient installation, and easy operation, supports the video intercom function, access control function, door magnetic alarm, motion detection, and so on. As an intelligent device,the door station is mainly applied in the villa for improving the living security.
Page 8: Typical Application
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual ● IR distance: max. 5-meter, 940nm IR leds ● DWDR, wide angle—HD pinhole lens ● Auto-uploads alarm messages to the master station or the client software ● Remote reboot, remote upgrade(IE or Client software), time synchronization via ●...
Page 9: Appearance
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 2 Appearance Figure 2-1 Door Station Overview Table 2-1 Components Description Description Microphone Built-in Camera Low Illumination Supplement Light Call Button Loudspeaker Note: Default settings of call button: when you press the call button, it calls the Master Station;...
Page 10: Terminals And Wiring
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 3 Terminals and Wiring 3.1 Terminals and Interfaces Description Figure 3-1 Terminals and Interfaces Table 3-1 Terminals and Interfaces Description Name Interfaces Description Network Interface (PoE Supported) Grounding Signal ALARM Door Lock Relay Output(Connect Electric Strike) Power Supply...
Page 11: Wiring Description
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 3.2 Wiring Description 3.2.1 Door Lock Wiring Terminal NC/COM is set as default for connecting magnetic lock/electric bolt; terminal NO/ COM is set as default for connecting electric strike. Figure 3-2 Door Lock Wiring...
Page 12: Installation
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 4 Installation Before you start: ● Make sure the device in the package is in good condition and all the assembly parts are included. ● The device supports two ways of power supply: 12 VDC, or PoE power supply. Please make sure your power supply matches your door station.
Page 13: Wall Mounting
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 4.2 Wall Mounting Steps: 1. Fix the wall mounting plate to the wall with 4 expansion screws. Figure 4-2 Install the Plate...
Page 14 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 2.Insert terminal blocks into the interfaces of the door station body, and connect the network cable. Figure 4-3 Insert Terminals and Network Cable...
Page 15 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 3.Fix the door station main body to the protective shield tightly. Figure 4-4 Fix the Main Body to the Shield 4. Hook the door station to the wall mounting plate tightly.
Page 16 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Figure 4-5 Hook the Door Station to the Plate...
Page 17 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 5. Use the rubber plug with the door station main body. Figure 4-6 Secure the Door Station...
Page 18: View Door Station
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 5 View Door Station 5.1 View via Web Browser Steps: 1. Power on the device, and connect the device to the network. 2. Input the default IP address to the address bar of the web browser, and click Enter to the activation interface.
Page 19 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual file,then run it. Figure 5-2 Download IPC_AX Figure 5-3 Run IPC_AX If the installation fails, check whether there is video viewed through other IE window or page. You should close the video or the IE window directly.If it successes, click refresh, you can view the live video.
Page 20 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Method 2: The prompt message as below will come out in the page after a successful login. Right click “Allow”. Figure 5-4 Security Warning Then the prompt of security warning will pop up to remind the user to install IPC_AX control.
Page 21: View Via Search Tool
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 1. Select “Tool” in the menu bar, and then select “Internet Options” from thedrop-down menu. 2. Select “Security” in the pop-up Internet options. 3. Click “Internet” icon and then click “Custom Level”. 4.
Page 22 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Double click to select the device, The login interface is displayed as shown in figure below in English operating system. Figure 5-7 User Login The system default Super User is admin (password: admin). Input the correct user ID and password and then press “OK”...
Page 23: Remote Operation Via Web Browser
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 6 Remote Operation via Web Browser 6.1 Access to the Door Station System Requirement: Operating System: Microsoft Windows XP SP1 and above version CPU: 2.0 GHz or higher RAM: 1G or higher Display: 1024×768 resolution or higher Web Browser: 32-bit Internet Explorer 8.0 to 11 Steps:...
Page 24: Live View
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 6.2 Live View Figure 6-2 Live View Page Door Station supports digtal zoom.Click the button to enable digtal zoom ;when the button changes to , click it to disable digtal zoom.During the digtal zoom enable, press the left mouse button and drag a blue frame area displays on the video,it will zoom in to the full live video interface;...
Page 25 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Indicate audio input/output disabled. Click the buttons to enable audio input/output and then the buttons will be shown as PTZ control and PTZ funciton: When the camera is working with Pan/Tilt, it is able to control the PTZ to perform such operations, such as direction control, focus and zoom adjustment, and speed setting.
Page 26: System
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 6.3 System Click the navigation bar [System] and it displays the following three option tabs: System, Time andAdvanced, as shown in Figure 6-3. 6.3.1 System Information The initial interface of System Settings displays related system information, such as basic system information, network settings, NTP settings, alarm settings, H.265/H.264/MJPEG video settings, etc.
Page 27 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual to save it. There are 33 time zones for your selection:. If Daylight Saving Time is applied in your region, please turn on Daylight saving time. After settings completed, please click the button “Save”. NTPSettings Set the NTP server’s IP address, test NTP server’s status, and set parameters of Sync with NTP, including enable/disable Sync with NTP, Sync time and Sync...
Page 28: Advanced Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 6.3.3 Advanced Settings Figure 6-5 “Advanced” Settings Software Update Free software update is provided for Door Station, and this update service can reduce system maintenance budget. Confirm the requirement submitted by user, we will provide the latest software for download, and help user to update the Door Station.
Page 29 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Figure 6-6 Update software selection dialog box Select update file. The selected update file will be displayed in the Software Update box. After that, click “Submit” button to update software, the following information will appear: Figure 6-7 Update confirm box Click “OK”...
Page 30 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual pop up a message as below: Figure 6-8 Reset to factory confirm box Click “OK”, all the parameters (excluding IP address) will be reset to the factory default settings. If “Keep current IP unchanged” is unselected, the IP address will be reset to the factory default settings.
Page 31: Network Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Note:Available only for the super user. 6.4 Network Settings Click “Network” in the navigation bar, and the following interface will display: Figure 6-9 Network Settings 9 options tabs are available: Network, FTP, SMTP, QOS, IGMP, SIP,RORT,DDNS and Protocol.
Page 32: Ftp Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 6.4.2 FTP Settings Figure 6-11 FTP Settings IP camera has the function of alarm associated with FTP upload (alarm triggered image snapshot). Configure server IP, user name and password in the FTP settings and activate FTP handling way in alarm settings, then alarm triggered images FTP upload can be achieved.
Page 33: Qos Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual ● To: Mail address of recipient. ● CC: Mail address of the person copy to. ● Authentication: Enable or disable authentication function. This function ● should be set according to authentication requirements of mail server. ●...
Page 34: Igmp Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 6.4.5 IGMP Settings Figure 6-14 IGMP Settings IP camera supports multicast function. In the IGMP interface, users can select the stream type and set the state, multicast IP address and RTPport.
Page 35: Sip Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 6.4.6 SIP Settings Figure 6-15 SIP Settings Before using SIP connection you need to set parameters in the web interface client.
Page 36 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Enable SIP: Activate SIP account. Only a one account can be active at one time. Registration status: Account status in the SIP server. Name: Name of the door station. Displayed during calls. This field is empty by default.
Page 37: Port Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Call Recipient 1-5: Select the recipients that must be called when the “Call” on the door station is pressed. These fields are empty by default. Relay Out 1 (DTMF): set the value of the DTMF signal. The relay outputs will close when the signal is received.
Page 38: Ddns Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Figure 6-16 PORT Settings The default Http(WEB) port is 80. You can change it at will. But if you change it as 8888, then you enter 192.168.1.18:8888 for accessing the device.All the port in the interface can be changed but can’t be the same.
Page 39: Protocol Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual DDNS server into the address bar, configure domain name, user name, password and update time and then save the settings. Open the IE browser, and enter the domain name to go to the query page of the device. 6.4.9 Protocol Settings Figure 6-18 Porotocol Settings Click “ON”...
Page 40: Basic Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Figure 6-19 Basic Settings 6.5.1 Basic Settings You can set the following parameters: Flicker frequency: 50Hz or 60Hz. CVBS: It automatically changes with the flicker frequency. (Notes: analog videos are shut off after MJPEG stream is enabled. To enable analog videos, please disable MJPEG stream.) Enable or disable vertical&horizontal mirror,backlight compensation,digital WDR,antiFalse color,antifog,Lensshade &LensDistort correct or...
Page 41: Effect Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Switch time,color mode HilightCompress and ExposureTarget can also be set in this interface. Exposure mode: Manual, Scene and Shutter. In the Scene mode, indoor or outdoor can be selected and AGC can be set (maximum 64X); if set to manualmode, shutter speed can be set from 1/25s to 1/8000s and manual AGC can beset to 1X to 64X , yet the scene and AGC are nonadjustable;...
Page 42 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Figure 6-21 Effect Set - General Drag the sliding block to adjust the brightness, sharpness, hue, contrast, saturation and 3D denoise.
Page 43 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Figure 6-22 Effect Set – Mode The camera supports 6 video effect modes. Users can set and save Name, ICR control mode and Scene parameters for each mode. Click “Factoryset” to restore it to default settings.
Page 44: White Balance Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 6.5.4 White Balance Settings Figure 6-23 White Balance Settings The camera has rich white balance modes, including Auto, Manual, Incandescent light, Cool white fluorescent light, Sun light, Cloudy and Natrium light.
Page 45: Video Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Figure 6-24 Video Settings Click the related option tab to enter the setting interface. 6.6.1 Video Settings Users can set the video parameters in the format of H.265/H.264 main or sub stream and MJPEG stream , such as resolution, frame rate and IP rate.
Page 46 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual performance is lowered. The smaller the frame is, the worse the image continuity will be, but the CPU could handle more events. The maximum frame rate for H.265/H.264 is 30fps. The maximum frame rate for MJPEG is 5fps.
Page 47: Character Display
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Image Quality: it can be set under MJPEG stream. Options: Highest, High, Average, Low and Lowest. The higher the image quality is, the more bandwidth it will occupy. 6.6.2 Character display Figure 6-25 Character display Character display settings include: Text charater and Date&Time charater.
Page 48: Motion Detection
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual text on if you need . Only if Text 1, Text 2 and Date&Time charater are set to “On”, you can set the text content and the display position of text and date. Context: Enter the text content in the box of Context, which allows up to 40 characters (lower/upper case letters and 0~9 ).
Page 49: Privacy Mask
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Tick the box of Zone number to be set. If the motion detection area has been set, a blue frame will be displayed on the screen. How to set the motion detection area: Tick the box of motion detection area number.
Page 50: Path
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Figure 6-27 Privacy Mask Settings How to set the privacy masks: Tick the box of motion detection area number. Click the button “Draw” with the mouse, press the left mouse button and drag on the video till a blue frame displays on the screen.
Page 51: Audio Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual interface. Figure 6-28 Storage Path Default photo saving path: C:\IPC_AX\Picture. Default video saving path: C:\IPC_AX\Video. Photo and video formats can also be set. The default photo format is .jpg and the default video format is .avi.
Page 52: Alarm Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Figure 6-29Audio Settings Switch: Set to “On” to enable audio,Set to “Off” to disable audio. Sample Rate: 8K. Format: G711-U,G711-A,PCM,G726 can be set according to the demand. InputVolume: InputVolume is means the minimum sampling level of input audio and output audio volume ，...
Page 53 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual interface: Figure 6-30 Alarm Settings Alarm Configuration I/O Input 1: Settable 1-channel alarm inputs. Each alarm input has 2 modes: Grounded Circuit or Open Circuit. Alarmout Contact: used to set sending way of alarm. Local Contact: I/O out1 is triggered by I/O alarm in, motion detection alarm.
Page 54 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Default: Local Contact. Net Contact: I/O out is controlled by the surveillance management software. Note: This function needs to be supported by digital video surveillance management software like HCMS. If Net Contact is selected, users have to set Alarm Server IP the same as the IP address of HCMS server.
Page 55: Record Management
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 6.8 Record Management IP cameras support storage with SD card. In the Record Management interface, you can set the recording parameters, replay and download the recorded videos. 6.8.1 Record Settings Figure 6-31 Record Settings SD card when full : Overwrite or Stop.
Page 56: Playback Settings
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual 6.8.2 Playback Settings Figure 6-31 Playback Settings Video Search: set the start and end time, and then click the search button. All videos recorded during this period of time will display in the list. Playback: to replay a video, double click a file in the list with the mouse or select a file and then press the “Play”...
Page 57: User Management
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual The process shows 100% after downloading is finished. Click the button “Open” to enter download content. 6.9 User Management The default super user is admin (password: admin). Super user can add, delete common user, and change the password of common users.
Page 58 IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual shall include letter, number and underline only. No special character is allowed. The string length of user name is legal between 1 and 30 characters and that of password is between 8 and 20 characters.) (3) Click “OK”...
Page 59: System Log
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual Click button in the account list, the dialog box of Edit User Information will pop up: Figure 6-36 Input the old password, enter the desired new password for twice and then click “OK”...
Page 60: Appendix
IP Video Intercom Waterproof Vandal-Resistant Door Bell Station ·User Manual the right of the screen. Figure 6-38 System Log It can display 30 logs on a page. The user can turn over the pages or skip to the desired page by clicking the below arrows. Click “Delete logs”, a prompt will come out.