Advertisement
# 30278
Hyskore
®
Bench Top 360˚
Armorer's Vise
Guns, Scopes, Benches, Ammunition, Protective Gear, etc. are not included!
The vise rotates 360˚ around a central axis and has an integral clutch
that allows it to lock up at any angle. Guns can be held in any position
for cleaning, scope mounting or maintenance. This means you can clean
with the muzzle angled down so that cleaning solvents and debris run
out the muzzle and not into the action or trigger group. If you have an
AR-15, remove the rear take down pin and grip the lower receiver in the
vise and the gun will be securely held while allowing full access to all
internal parts.
In the course of shipping, parts may end up missing or damaged,
Call us at 631.673.5975. 8:30a.m. - 5:00 p.m. Eastern Time. We will promptly send replacements.
Always wear appropriate vision and hearing protection when using this product!
Advertisement
Table of Contents
Summary of Contents for Hyskore 30278
- Page 1 # 30278 Hyskore ® Bench Top 360˚ Armorer’s Vise Guns, Scopes, Benches, Ammunition, Protective Gear, etc. are not included! The vise rotates 360˚ around a central axis and has an integral clutch that allows it to lock up at any angle. Guns can be held in any position for cleaning, scope mounting or maintenance.
- Page 2 The HYSKORE #30278 Bench Top Armorer’s Vise makes all of these ® processes easy and convenient for the shooter. Some guns are relatively easy to support during the cleaning process;...
- Page 3 Assembly & Mounting Place the vise mounting bracket on the bench top Items You Need To Purchase and mark the centers of the 4 mounting holes. In order to assemble and mount this product you will need an Using the ½ drill bit drill 4 holes. 8...
- Page 4 The handle (A) has not been attached to the vise Thread the handle onto the shaft. Make sure that to avoid damage in shipping and handling. You the #3 hex nut is in place first. Please note that will note that there are 3 hex nuts on the shaft. the handle has a left hand thread, therefore, you Hex nuts #1 and #2 have been fixed in place at will be turning it counter clockwise.
- Page 5 The vise can be rotated to the right (clockwise To the left, depending on the configuration of your facing it) or gun; ie. If some part like the bolt handle get in the way. How To Build A Simple Sturdy Bench These are the materials that you will need to construct a bench that has a 2...
- Page 6 Assemble the legs as pictured above. It is a good The legs are not identical within each pair one idea to pre-drill all holes in the members that the is a mirror image of the other. This is how the screws go through first.
- Page 7 As such, they are not included with any product. All photographs, drawings, copy, instructions, etc. are the exclusive property of HYSKORE /Power Aisle, Inc. All downloadable files are intended for the use of the end user of HYSKORE ®...
- Page 8 # 30278 Hyskore ® Bench Top 360˚ Armorer’s Vise Guns, Scopes, Benches, Ammunition, Protective Gear, etc. are not included!
Need help?
Do you have a question about the 30278 and is the answer not in the manual?
Questions and answers