YYZ Lighting VERTEX FLEX-FT16 Instruction

VERTEX FLEX-FT16 INSTRUCTION
VTF FT16
IP67
FLEX TOP USING INSTRUCTION
1. The most suitable operation temperature shall be -25°C to 45°C.
2. Pleas make sure that even during installation, the predetermined bending direction is NEVER changed. The product only have top
bending, and can not be twisted.
3. YYZ FLEX TOP shall not be bent sharply. PC core and en-capsulation can not prevent any damage.
4. The maximum bending diameter is 300mm, over bending will damage and void any warranty.
5. During the installation, the YYZ FLEX TOP
TOP can not be:
Twisted
O
Dropped
O
Bent at a 90°angle or bent at all
O
Sagging/Hanging down
O
6. Do not leave it together with card or paper directly as it will influence the surface clean.
7. For installation,4 ways for your selection.
Mounting clips
O
Alumium profile
O
PC profile
O
Holding clips
O
8. For the cutting unit, it is 41.666mm for white color and 71.429mm for RGB.
STANDARD DIMENSION
5012mm
16mm
15 m m
YYZ Lighting Inc., 1175 Squires Beach Rd, Unit 2, Pickering, ON L1W 3V3, Canada. www.yyzlighting.com
VTF FT16 Series
6mm
16mm
15mm
Bend too tight
Page 1 of 2