Advertisement
Quick Links
PACK CONTENTS
PACK CONTENTS
• Adjustable outer frame
• 4 x frame corner covers
• Multi Tool (Allen Key / Phillips Head Screwdriver)
• Screws (Phillips Head
• Plantation Shutter Panels with mid-rail(s)
• Hinge Pins
• White Stickers
Frame
Screw
70mm
Check out the install video at
) - see below
Hinge
Locking Screw
11mm
DOUBLE PANEL
INSTALL
GUIDE
I
I/N: 0022390
J
I/N: 0022392
N
I/N: 0022396
+ Custom Configuration: P2-M1, P2-M2
easyas-shutters.com
WITH MID-RAIL(S)
APPLIES TO MODELS
APPLIES TO MODELS
O
I/N: 0022397
S
I/N: 0022401
T
I/N: 0022402
Hinge
Pin
80mm
Advertisement
Related Manuals for EasyAS 0022390
Summary of Contents for EasyAS 0022390
- Page 1 WITH MID-RAIL(S) INSTALL GUIDE PACK CONTENTS PACK CONTENTS APPLIES TO MODELS APPLIES TO MODELS I/N: 0022390 I/N: 0022397 • Adjustable outer frame • 4 x frame corner covers I/N: 0022392 I/N: 0022401 • Multi Tool (Allen Key / Phillips Head Screwdriver)
- Page 2 • On a soft surface, lay out the adjustable frame, on the floor, in front of the window with hinges pointing toward you STEP 1 • Using the labels on each frame, lay out the adjustable frame in the following sequence, as shown in figure 1(A): T –...
- Page 3 • Insert the adjustable frame into the window reveal as shown in figure 3(A). STEP 3 • Using the Allen key, adjust the frame evenly by turning each adjuster 2 full turns at a time in an anticlockwise direction to expand frame into the opening. Adjust each side adjuster evenly until a tight, square fit, is achieved as shown in figure 3(B) •...
- Page 4 • Once complete, place white stickers (supplied) over adjusters/screws as shown in figure 5(B) • Screw in the remaining ‘Hinge locking’ screws in place 5(C) Secure frame with remaining screws White stickers Hinge locking screw 5(A) 5(B) 5(C) Check out the install video at easy-as.com.au easy-as.co.nz easyas-shutters.com Check out the install video at...