Page 2
Hold load board in position against the Using 2 M6x14 screws and 2 M6 nuts, upright and mark through holes from rear for secure the Load Board to the frame. drill positions. LS3 installation guidelines LS3 installation guidelines...
Page 3
For working at heights, the appropriate lifting equipment should be used. The personnel who will carry out the assembly work will observe the H&S provisions. Constructor Finland Oy Sauvonrinne 12, FI-08500 Lohja P.O. Box 100, FI-08150 Lohja, Finland T. +358 19 36251 sales@kasten.fi www.kasten.fi 1912-020_FI(EN)