Advertisement
Advertisement
Table of Contents
Summary of Contents for USA Vinyl Weatherables
- Page 1 3-Rail Fence Gate Installation Guide...
- Page 2 Gate Assembly Measuring Tape 1. Locate, lay out and dry-assemble all parts of the gate including posts and rails. Do not use glue. 2. For a single gate, cut the rails to a length 2 1/2” shorter than the gate opening size (gate opening size is the distance between the gate posts).
- Page 3 Gate Assembly Measuring Tape Measuring Tape 1. Repeat the previous steps for the other post. This may take some assistance to do before the adhesive sets. 2. Measure the top and bottom of gate to ensure both lengths are the same. SELF-TAPPING SCREWS (6/BRACE) BRACING...
- Page 4 Gate Installation SINGLE GATE INSTALLATION 1. Determine the direction the gate is to swing, usually swings away from yard. Check your local codes! 2. Install aluminum insert on the hinge side prior to the installation of the gate. 3. Locate and follow hardware installation instructions. The gate will be mounted to be flush with the side of the fence that the gate will be swinging.
Need help?
Do you have a question about the Weatherables and is the answer not in the manual?
Questions and answers