Summary of Contents for REARO selkie BOARD
- Page 1 BO RD INSTALLATION GUIDE DOMESTIC 2 OR 3 SIDED SHOWER INSTALLATION Please carefully read the following information to ensure that you do not invalidate your 10 year guarantee.
- Page 2 Selkie Board Installation Guide Getting Started Cutting Apertures Leave a 3mm clearance around all pipes and accessories and seal with silicone Although Selkie Board has a highly durable sealant. finish, care should be taken when cutting apertures or inspection hatches. Tools Using jigsaw, slowly cut around perimeter of shape of cut out on rear face (fig 4).
- Page 3 Fig10. Please Note: Peel back the protective film at this stage by approx. 50mm to (g) The Selkie Board should be fitted to be accommodate fitting. After cutting - we positioned just above the shower tray. recommend a “dry fit” (before applying Using ‘packers’, leave a 3-4 mm gap from...
- Page 4 • panels should never be fitted directly onto a shower tray without adequate sealing. Please see instructions. FURTHER INFORMATION For further information please contact your local rearo service centre, where our experienced team can offer further advice regarding installation or maintenance. Rearo, Loanbank House, Loanbank Quadrant, Govan, Glasgow, G51 3HZ Tel: 0141 440 0800 Fax: 0141 445 3342 www.rearo.co.uk sales@rearo.co.uk...
Need help?
Do you have a question about the selkie BOARD and is the answer not in the manual?
Questions and answers