Table of Contents
Advertisement
Quick Links
USER MANUAL
SensiRoom h
Watering control device
Complete Set
Unit including socket, cable, plug - 1 pcs.
Humidity sensor - 1 pcs.
Suspended fixture - 1 pcs.
Technical feature:
Humidity range: 0 - 100%
Watering time: 1 sec - 10 min
Watering interval: 1 min - 10 h
Voltage: 220 - 240 V
Power output: 1500W
Made in a lab E-Mode.pro
Made in a lab E-Mode.pro
Microprocessor control
Auto-watering
Humidity sensor
Service life : 10 years
Made in Russia
Serial number: 0102120
www.E-Mode.pro
www.E-Mode.pro
1 из 6
Advertisement
Table of Contents
Summary of Contents for E-Mode SensiRoom h
- Page 1 Service life : 10 years Watering interval: 1 min - 10 h Made in Russia Voltage: 220 - 240 V Serial number: 0102120 Power output: 1500W Made in a lab E-Mode.pro Made in a lab E-Mode.pro www.E-Mode.pro www.E-Mode.pro 1 из 6...
-
Page 2: Table Of Contents
5 - Diode color in humidity setting mode, dosing time mode, and pause mode. 6 - Socket with protective cap 7 - Slot for humidity level Made in a lab E-Mode.pro Made in a lab E-Mode.pro www.E-Mode.pro www.E-Mode.pro 2 из 6... -
Page 3: Device Connection
2. Connect the humidity sensor to the device. 3. Place the humidity sensor into soil (substrate) to see the current humidity level (%) on the display. 4. Plug the pump or electromagnetic valve into SensiRoom h. socket. 5. Setup necessary humidity level, watering time, and watering intervals. - Page 4 (driest) layer. It will lead to overwatering. Optimal way: sensor is placed into the 2nd layer, humidity level is about 60-70%, when watering mode starts operating. Made in a lab E-Mode.pro Made in a lab E-Mode.pro www.E-Mode.pro www.E-Mode.pro...
-
Page 5: Setting Humidity Level
• Watering interval - 1 hour. The device waters during 30 seconds, if the humidity level is below 70%. Watering is repeated in an hour, if the humidity level is below 70%. Made in a lab E-Mode.pro Made in a lab E-Mode.pro www.E-Mode.pro www.E-Mode.pro... -
Page 6: Warranty
USER MANUAL Warranty Warranty period: 1 year since the day of purchasing. Free service and warranty repair is carried out by the specialists of E-mode laboratory. The address of the authorized service center: Russia, 614099 Perm, Dzerzhinskii Str. 59, office 405.
Need help?
Do you have a question about the SensiRoom h and is the answer not in the manual?
Questions and answers